Advertisement
7.
TROUBLESHOOTING
PROBLEM
Motor will not run
Lathe slows down when turning
Workpiece chars at tailstock end
8.
DECLARATION OF CONFORMITY
Declaration of Conformity We, the sole importer into the UK, declare that the product listed below is in conformity with the following
standards and directives.
WOOD LATHE 1000mm
Model: SM1308
73/23/EEC Low Voltage Directive
89/336/EEC EMC Directive
98/37/EC Machinery Directive
93/68/EEC CE MARKING DIRECTIVE
NOTE:
It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
IMPORTANT: No liability is accepted for incorrect use of this product.
WARRANTY: Guarantee is 12 months from purchase date, proof of which will be required for any claim.
INFORMATION: For a copy of our latest catalogue and promotions call us on 01284 757525 and leave your full name and address, including postcode.
POSSIBLE CAUSE
Defective On/Off switch or
defective switch cable
Motor burnt out
Tools blunt
Cut too deep
Cup centre too tight or not lubricated
The construction file for this product is held by the Manufacturer and may
be inspected, by a national authority, upon request to Jack Sealey Ltd.
Signed by Steve Buckle
For Jack Sealey Ltd. Sole importer into the UK of Sealey Quality Machinery.
Sole UK Distributor
Sealey Group,
Bury St. Edmunds, Suffolk.
SOLUTION
Replace defective parts.
DO NOT attempt to repair. Contact your local
authorised service agent.
Sharpen tools.
Reduce cut
Back off tailstock spindle and lubricate cup centre.
01284 757500
01284 703534
1st June 2006
www.sealey.co.uk
Web
sales@sealey.co.uk
email
SM1308 - 1 - 08/06/06
Advertisement
