Led Indicators; Updating The Firmware; Scanner Calibration; Maintenance Instructions - Revopoint POP 3 Quick Start Manual

LED Indicators

Connection Indicator
No light: Not Connected
Solid blue light: Connected
Flashing blue light: Working
Properly

Updating the Firmware

A pop-up will notify you when you connect your POP 3 to Revo Scan if
a firmware update is available. If you want to update your firmware,
follow the install wizard's prompts and ensure your POP 3 has a stable
power supply.

Scanner Calibration

Your POP 3 3D Scanner was calibrated in the factory and only needs to
be recalibrated after a year of use or if the scanned results do not
match the specified accuracy.

Maintenance Instructions

1. Small parts, such as markers, are dangerous if swallowed. Keep all
components out of reach of children and animals to avoid serious
injury to them.
2. Store the scanner and all accessories in a cool, dry place away from
direct sunlight.
3. Do not allow the scanner to come into contact with or become
Power Indicator
No light: Not Powered
Solid red light: Powered
Flashing red light: Starting
Solid green light: Started Successfully
©2023 REVOPOINT 3D ALL RIGHTS RESERVED 15
POP 3 Quick Start Guide