Advertisement
CONNECTIONS
1 - Connect the speaker cable securely to your IMPACT-X cabinet and power amplifier. The
amplifier should be in the OFF, POWER DOWN mode. Where possible use the speakON
compatible connectors as they are professional high current connectors specifically designed for
high power audio applications. Use the correct type of speaker cable according to the handling
capacity of your IMPACT-X loudspeaker. Use 2 conductors equal stranded insulated cable for
speaker runs. It is always advisable to use heavier cabling for longer cable runs.
2 - If using the speakON input of the combi connector, insert the speakON cable and rotate 1/8 of
a turn until locked in/ If using the jack plug input of the connector, insert it until secure.
3 - Power up your amplifier with levels set to zero. Carefully turn up amplifier volumes to confirm
that the connections are working.
IMPACT-X15
IMPACT-X15L IMPACT-X215 IMPACT-X215L IMPACT-X215LL
IMPACT-X FULL RANGE
IMPACT-X Series full range system
IMPACT-X18B IMPACT-X18BL IMPACT-X218B IMPACT-X218BL
IMPACT-X FULL RANGE AND SUBWOOFER
SUBWOOFER OPERATION:PASSIVE MOOE
IMPACT-X full range models and IMPACT-X Subwoofers in a system
using external active crossover
Full range output from amp
to IMPACT-X full range input
Pre-filtered output from active
crossover to (high)
IMPACT-X full range input
Pre-filtered output from active
crossover to (low)
IMPACT-X SUB input
3
Advertisement
