Maintenance - Human Touch iJoy-200 Use & Care Manual

Robotic massage chair
Table of Contents

Advertisement

Available languages

Available languages

customize massage
The massage-softening pad softens the massage intensity. For a stronger massage,
remove the massage-softening pad.
1. Open the zipper on the front of the backrest.
2. Remove the massage-softening pad from the pocket.
3. Close the zipper.
You can re-insert the massage-softening pad in the future,
following these same steps.
Replacement massage-softening pads are available
from Human Touch, for an additional charge.
humantouch.com
intensity
To experience the full power of
Human Touch
massage-softening pad.
But keep it handy, in case you
want to replace it in the future.
Your Human Touch iJoy massage chair may have
zips that are closed with a plastic Security Tie.
Cut the Security Tie with a nail clipper or other
suitable instrument. Take care to not cut the
chair upholstery.
10
care and
Cleaning:
1. Be sure to unplug before cleaning.
2. Do not use benzene, thinner or any other solvents on your massage chair.
just remove the
3. Remove dust on the backrest or armrest with a vacuum cleaner.
4. If the backrest or armrests become dirty, wipe with a damp cloth, then a dry cloth.
5. Common upholstery cleaners may be used for tough stains.
6. When cleaning the remote control or around the power switch, use a dry cloth only. Never use a damp cloth to clean the controller or power switch.
Fabric Care:
To maintain your Human Touch product in optimum condition, dust it frequently and/or vacuum it with a soft brush vacuum extension. SōfSuede
slightly damp cloth as necessary. For tougher stains on non-leather products, use a mild detergent mixed with water. Leather products should be wiped down occasionally with a leather furniture cleaning solution.
WARNING:
Be sure to test any cleaning solution on a small, inconspicuous part of the product to ensure that the color does not fade prior to using the solution on the entire product surface.
Maintenance and Repair:
1. The mechanisms of this product are specially designed and constructed to be maintenance free. No periodic lubrication or servicing is required.
2. Your chair should only be serviced by an authorized service center.
Storage:
1. When not in use for a long period of time, we recommend that the chair be covered, the power cord be coiled and that the unit be placed in an environment free of dust and moisture.
2. Do not store near heat or open flame. Do not leave this product exposed to direct sunlight for long periods of time. This may cause fading or damage.
Miscellaneous:
1. Foreign objects should not be inserted between the massage nodes or the unit housing.
2. Care should be taken not to overload the unit.
WARNING:
This product is equipped with a thermal resetting protection device. This is an added safety feature to protect you and this product from overheating. If the product should suddenly stop and will not start, turn
the main power switch, located on the back of the product, to off and do not operate the product for at least 30 minutes. Failure to turn the product off may result in the product starting unexpectedly when the product cools.

maintenance

To keep your product working and looking its best,
please follow these simple care guidelines.
11
products can also be brushed with a suede brush. Wipe with a

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the iJoy-200 and is the answer not in the manual?

Questions and answers

Michael
February 14, 2025

My ijoy 200 stopped moving up and down how do I fix this

1 comments:
Mr. Anderson
February 14, 2025

If your Human Touch iJoy-200 is not moving up and down, check the following steps:

1. Power Connection – Ensure the chair is properly plugged into a 120V AC outlet.
2. Child Safety Lock – Make sure the child safety lock is not engaged. If engaged, it prevents the chair from operating.
3. Fuse Check – Inspect the fuse in the power panel:
- Unplug the chair.
- Turn the fuse holder counterclockwise (about 1/8 turn) to remove it.
- Replace the fuse with a new 5.0 amp fuse.
- Reinsert and secure the fuse holder by turning it clockwise.
- Plug the chair back in and turn it on.

If the issue persists, contact Human Touch customer service at 800-355-2762 for further assistance.

This answer is automatically generated

Table of Contents