1. Manuals
  2. Brands
  3. Beko Manuals
  4. Washer
  5. WFL60SS
  6. Manual

Beko WFL60SS Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
WFL60SS
Document Number=
2820526481_EN / 20-12-18.(11:41)

Advertisement

Table of Contents
loading

Related Manuals for Beko WFL60SS

Summary of Contents for Beko WFL60SS

  • Page 1 WFL60SS Document Number= 2820526481_EN / 20-12-18.(11:41)

  • Page 3: General Safety Instructions

    General safety instructions This section includes security instructions which may help prevent the injuries and material damage risks. All kinds of warranties shall be invalid if these instructions are not observed. 1.1 Life and property safety Never place the product on a carpet-covered floor. Electrical parts will get overheated since air cannot circulate from under the device.

  • Page 4: Electrical Safety

    Electrical products are dangerous for the children. Keep the children away from the product when it is in use. Do not allow them to play with the product. Use child lock to prevent children from intervening with the product. Do not forget to close the loading door when leaving the room where the product is located.

  • Page 5: Important Instructions For Environment

    Important instructions for environment 2.1 Compliance With GSR 1349(E) &E-Waste(Management) Amendment Rules, INDIA - MOEF. / WEEE Directive This product complies with : India Gezztte : G.SR.261(E) 22/3/2018 / G.S.R.1349(E)30/11/2017 - E Waste regulations And wide Environment protection act 1986/29 This product bears a classification symbol for waste electrical and electronic equipment (WEEE).

  • Page 6: Technical Specifications

    Technical specifications Complying Commission Delegated Regulation (EU) No 1061/2010 Supplier name or trademark VoltasBeko Model name WFL60SS Rated capacity (kg) Energy efficiency class / Scale from A+++ (Highest Efficiency) to D (Lowest Efficiency) A+++ Annual Energy Consumption (kWh) Energy consumption of the standard 60°C cotton programme at full load (kWh) 0,710 Energy consumption of the standard 60°C cotton programme at partial load (kWh)

  • Page 7: Appropriate Installation Location

    4.1 Installation • Apply to the nearest authorised service agent for the installation of your product. • Preparation of the location and electrical, tap water and waste water installations at the place of installation is under customer's responsibility. • Make sure that the water inlet and discharge hoses as well as the power cable are not folded, pinched or crushed while pushing the product into its place after installation or cleaning procedures.

  • Page 8: Connecting Water Supply

    4.1.4 Connecting water supply The water supply pressure required to run the product is between 1 to 10 bars (0.1 – 1 MPa). It is necessary to have 10 – 80 liters of water flowing from the fully open tap in one minute to have your machine run smoothly. Attach a pressure reducing valve if water pressure is higher.

  • Page 9: Adjusting The Feet

    • If the length of the hose is too short, use it by adding an original extension hose. Length of the hose may not be longer than 3.2 m. To avoid water leak failures, the connection between the extension hose and the drain hose of the product must be fitted well with an appropriate clamp as not to come off and leak.

  • Page 10: Sorting The Laundry

    4.2 Preparation 4.2.1 Sorting the laundry * Sort laundry according to type of fabric, color, and degree of soiling and allowable water temperature. * Always obey the instructions given on the garment tags. 4.2.2 Preparing laundry for washing • Laundry items with metal attachments such as, underwired bras, belt buckles or metal buttons will damage the machine.

  • Page 11: Using Detergent And Softener

    4.2.6 Using detergent and softener When using detergent, softener, starch, fabric dye, bleacher and decolorant, descaling agents; read the manufacturer's instructions written on the package and follow the dosages specified. Use measuring cup if available. The detergent drawer is composed of three compartments: –...

  • Page 12: Using Liquid Detergents

    Using liquid detergents If the product contains a liquid detergent cup: • Put the liquid detergent container into the compartment no “2”. • If the liquid detergent lost its fluidity, dilute it with water before putting it into the detergent container. If the product is equipped with a liquid detergent part: •...

  • Page 13: Tips For Efficient Washing

    4.2.7 Tips for efficient washing Clothes Delicates/ Light Colours and Black/Dark Colours Woolens/ Whites Colours Silks (Recommended (Recommended (Recommended temperature (Recommended temperature temperature range temperature range range based on soiling level: range based on soiling level: based on soiling level: based on soiling 40-90 cold -40...

  • Page 14: Preparing The Machine

    4.3 Operating the product 4.3.1 Control panel Hygiene+ Cottons 90° 1200 Ready Cu & Collar Cottons Eco Wash 60° 1000 StainExpert Synthetics 40° Rinse Dark Care Daily Xpress 30° Spin Jeans Xpress Super Short 20° Outdoor Cancel Monsoon Sports Pet Hair Start/ Woollens Temp.

  • Page 15: Programme And Consumption Table

    4.3.4 Programme and consumption table Auxiliary functions Selectable temperature Programme range °C 2,15 • • • 1200 Cold - 90 1,65 • • • Cottons 1200 Cold - 90 1,00 • • • 1200 Cold - 90 0,710 1200 60** Cold - 60 0,519 1200 Cottons Eco...

  • Page 16: Main Programmes

    4.3.5 Main programmes Depending on the type of fabric, use the following main programmes. • Cottons You can wash your durable cotton laundry (sheets, bedlinen, towels, bathrobes, underwear etc.) in this programme. When the heavy function is selected, programme duration becomes notably longer to ensure superior washing and rinsing performance.
  • Page 17 • Daily Xpress / Xpress Super Short Use this programme to wash your lightly soiled or unspotted cotton clothes in a short time. The programme duration can be increased up to 28 minutes and maximum laundry can be washed when the heavy function is selected.

  • Page 18: Temperature Selection

    • Select the stain programme. • Select the stain you want to clean by locating it in the groups above and selecting the related group with the heavy auxiliary function button. • Read the garment tag carefully and ensure that correct temperature and spin speed are selected. •...

  • Page 19: Auxiliary Function Selection

    If you want to spin the laundry held in water, adjust the Spin Speed and press Start / Pause button. The programme will resume. Water is drained, laundry is spun and the programme is completed. If the programme has not reached the spinning step, you can change the speed without switching the machine to Pause mode.

  • Page 20: Delayed Start

    • Child lock Use Child Lock function to prevent children from tampering with the machine. Thus you can avoid any changes in a running programme. If the Programme Selection knob is turned when the Child Lock is active, "Con" appears on the display. The Child Lock does not allow any change in the programmes and the selected temperature, speed and auxiliary functions.
  • Page 21 4.3.12 Starting the programme 1. Press Start / Pause button to start the programme. 2. Programme follow-up light showing the startup of the programme will turn on. If no programme is started or no button is pressed within 1 minute during programme selection process, the machine will switch to Pause mode and the illumination level of the temperature, speed and loading door indicator lights will decrease.

  • Page 22: Cancelling The Programme

    4.3.16 Cancelling the programme To cancel the programme, turn the Programme Selection knob to select another programme. Previous programme will be cancelled. End / Cancel light will flash continuously to notify that the programme has been canceled. Your machine will end the programme when you turn the Programme Selection knob; however, it does not drain the water inside.

  • Page 23: Maintenance And Cleaning

    4.4 Maintenance and cleaning Service life of product extends and frequently experienced problems will be reduced if it is cleaned at regular intervals. 4.4.1 Cleaning the detergent drawer Clean the detergent drawer at regular intervals (every 4-5 washing cycles) as shown below in order to prevent accumulation of powder detergent in time.

  • Page 24: Draining Remaining Water And Cleaning The Pump Filter

    4.4.5 Draining remaining water and cleaning the pump filter The filter system in your machine prevents solid items such as buttons, coins and fabric fibers clogging the pump impeller during discharge of washing water. Thus, the water will be discharged without any problem and the service life of the pump will extend.

  • Page 25: Troubleshooting

    Troubleshooting Problem Reason Solution Program does not start after Start / Pause / Cancel button was not pressed. • *Press the Start / Pause / Cancel button. closing the door. It may be difficult to close the loading door in case •...
  • Page 26 Problem Reason Solution Programme time does not Timer may stop during water intake. • Timer indicator will not countdown until the countdown. (On models with machine takes in adequate amount of water. display) (*) The machine will wait until there is sufficient amount of water to avoid poor washing results due to lack of water.
  • Page 27 Problem Reason Solution It does not rinse well. The amount, brand and storage conditions of the • Use a detergent appropriate for the washing detergent used are inappropriate. machine and your laundry. Keep detergents closed in an environment free of humidity and do not expose them to excessive temperatures.
  • Page 28 Problem Reason Solution Foam is overflowing from the Too much detergent is used. • Mix 1 tablespoonful softener and ½ l water detergent drawer. and pour into the main wash compartment of the detergent drawer. • Put detergent into the machine suitable for the programmes and maximum loads indicated in the “Programme and consumption table”.

  • Page 29: Warranty

    Warranty Dear Customer, Your Voltas.Beko Washing machine is covered for a comprehensive warranty of 2 year from date of purchase and additional 10 year warranty on Motor (2 Year Standard + 10 Year extended only on Motor only ) irrespective of whether product is in use or not.
  • Page 30 In case the warranty obligation could not be met due to any condition beyond our control, commercial settlement will be done considering the depreciation value of the product, based on the purchase date. The Company’s decision in this regard shall be final and conclusive. This Warranty becomes void if there is any unauthorized repair, tampering, alteration, modification, misuse or damage to the Product.
  • Page 31 The Company reserves the right to amend and change the Terms and Conditions of the warranty anytime. Warranty conditions for additional warranty on Motor: Additional warranty is only on Motor, and will be replaced free of cost if found faulty or defective due to manufacturing defects. Other charges like visit charges, transportation or labour charges need to be paid by customer.

Table of Contents