Dispensing Liquid Chemical Agents; Dispensing Systems - Miele PLW 8616 Operating Instructions Manual

 Unsuitable process chemicals pose a health risk.
Using unsuitable process chemicals will generally cause an unsat-
isfactory reprocessing result and can pose a health risk or cause
damage to property.
Only use process chemicals designed specifically for use in this
machine and follow the manufacturer's instructions on their use.
Please carefully observe any instructions relating to non-toxic
residues.
 Process chemicals pose a health risk.
Some process chemicals may be corrosive and irritant.
Observe the relevant safety regulations and safety data sheets is-
sued by the process chemical manufacturers when handling pro-
cess chemicals.
Take all protective measures required by the process chemical
manufacturer, e.g. wear protective goggles and protective gloves.

Dispensing systems

The machine is fitted with 2 dispensing systems for the dosage of li-
quid cleaning agent and neutralising agent as standard. Up to 4 addi-
tional internal dispensing systems can be installed.
The dispensing systems and siphons must be colour-coded. Stickers
are supplied in the following colours:
- Blue
- White
- Red
- Green
- Yellow
- Black
Enter the process chemicals used and the relevant colour in the table
below if an additional dispensing system has been installed. When
containers with process chemicals are connected, the colour code
makes it easier to assign the relevant siphon.
Dispensing
system
1
2
3
4
5
6

Dispensing liquid chemical agents

Colour code
Blue
Red
Process chemical
45