HIKVISION DS-2DE2A404IW-DE3/W User Manual
  1. Manuals
  2. Brands
  3. HIKVISION Manuals
  4. Security Camera
  5. DS-2DE2A404IW-DE3/W
  6. User manual

HIKVISION DS-2DE2A404IW-DE3/W User Manual

Network ptz camera
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Network PTZ Camera
User Manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the DS-2DE2A404IW-DE3/W and is the answer not in the manual?

Questions and answers

Related Manuals for HIKVISION DS-2DE2A404IW-DE3/W

Summary of Contents for HIKVISION DS-2DE2A404IW-DE3/W

  • Page 1 Network PTZ Camera User Manual...
  • Page 2 SURVEILLANCE LAWS VARY BY JURISDICTION. PLEASE CHECK ALL RELEVANT LAWS IN YOUR JURISDICTION BEFORE USING THIS PRODUCT IN ORDER TO ENSURE THAT YOUR USE CONFORMS THE APPLICABLE LAW. HIKVISION SHALL NOT BE LIABLE IN THE EVENT THAT THIS PRODUCT IS USED WITH ILLEGITIMATE PURPOSES.
  • Page 3 User Manual of Network PTZ Camera IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE LAW, THE LATER PREVAILS. 0505071080328 © Hikvision...
  • Page 4 (Cd), lead (Pb), or mercury (Hg). For proper recycling, return the battery to your supplier or to a designated collection point. For more information see: www.recyclethis.info. Industry Canada ICES-003 Compliance This device meets the CAN ICES-3 (A)/NMB-3(A) standards requirements. © Hikvision...
  • Page 5  Make sure the power supply voltage is correct before using the product.  Do not drop the product or subject it to physical shock. Do not install the product on vibratory surface or places.  Do not expose it to high electromagnetic radiating environment. © Hikvision...
  • Page 6  Use a soft and dry cloth when clean inside and outside surfaces of the product cover. Do not use alkaline detergents.  Improper use or replacement of the battery may result in hazard of explosion. Use the manufacturer recommended battery type. © Hikvision...

  • Page 7: Table Of Contents

    Configuring Capture Schedule ................... 35 5.1.3 Configuring Net HDD ......................36 ....................... 39 ASIC VENT ONFIGURATION 5.2.1 Configuring Motion Detection ................... 39 5.2.2 Configuring Video Tampering Alarm ................. 44 5.2.3 Configuring Alarm Input ....................45 5.2.4 Configuring Alarm Output ....................47 © Hikvision...
  • Page 8 6.3.4 Configuring Image Parameters Switch................91 ....................92 ONFIGURING YSTEM ETTINGS 6.4.1 System Settings ........................92 6.4.2 Maintenance ........................97 6.4.3 Security ..........................100 6.4.4 User Management ......................102 APPENDIX ............................106 SADP S ......................106 OFTWARE NTRODUCTION © Hikvision...

  • Page 9: Chapter 1 Overview

    In the client software, use the left key of mouse to click on the desired position in the video image and drag a rectangle area in the lower right direction, then the camera system will move the position to the center and allow the rectangle area to zoom in. Use the left key of mouse to © Hikvision...
  • Page 10 The programmable actions include: auto scan, random scan, patrol 1-8 ,pattern 1-4, preset 1-8,frame scan, panorama scan, tilt scan, day, night, reboot, PT adjust, Aux Output, etc.  Park Action This feature allows the camera to start a predefined action automatically after a period of © Hikvision...
  • Page 11 Comparing with the general 2D digital noise reduction, the 3D digital noise reduction function processes the noise between two frames besides processing the noise in one frame. The noise will be much less and the video will be clearer. © Hikvision...

  • Page 12: Chapter 2 Network Connection

    Figure 2-1.  Refer to the Figure 2-2 to set the network camera over the LAN via a switch or a router. Network Cable Network Speed Dome Computer Figure 2-1 Connecting Directly © Hikvision...

  • Page 13: Activating The Camera

    The password should be something of your own choosing (using a minimum of 8 characters, including upper case letters, lower case letters, numbers and special characters) in order to increase the security of your product. © Hikvision...
  • Page 14  Proper configuration of all passwords and other security settings is the responsibility of the installer and/or end-user. © Hikvision...
  • Page 15 Get the client software from the supplied disk or the official website, and install the software according to the prompts. Follow the steps to activate the camera. Steps: Run the client software and the control panel of the software pops up, as shown in Figure 2-6. © Hikvision...
  • Page 16 Figure 2-7 Device Management Interface Check the device status from the device list, and select an inactive device. Click Activate to pop up the Activation interface. Create a password and input the password in the password field, and confirm the password. © Hikvision...
  • Page 17 Figure 2-9 Modifying the Network Parameters Change the device IP address to the same subnet with your computer by either modifying the IP address manually or checking the checkbox of Enable DHCP. Input the password to activate your IP address modification. © Hikvision...

  • Page 18: Optional) Setting Security Question

    Connecting the network camera with static IP directly You can also save the static IP in the camera and directly connect it to the internet without using a router. Refer to Section 2.1.2 for detailed IP address configuration of the camera. © Hikvision...

  • Page 19: Dynamic Ip Connection

    This camera supports the PPPoE auto dial-up function. The camera gets a public IP address by ADSL dial-up after the camera is connected to a modem. You need to configure the PPPoE parameters of the network camera. Refer to Section 6.1.1 Configuring PPPoE Settings for detailed configuration. © Hikvision...
  • Page 20 1. Apply a domain name from a domain name provider. 2. Configure the DDNS settings in the DDNS Settings interface of the network camera. Refer to Section 6.1.1 Configuring DDNS Settings for detailed configuration. 3. Visit the camera via the applied domain name. © Hikvision...

  • Page 21: Chapter 3 Accessing To The Network Speed Dome

    6. Install the plug-in before viewing the live video and operating the camera. Follow the installation prompts to install the plug-in. You may have to close the web browser to install the plug-in. Reopen the web browser and log in again after installing the plug-in. © Hikvision...

  • Page 22: Accessing By Client Software

    The product CD contains the client software. You can view the live video and manage the camera with the client software. Follow the installation prompts to install the client software and WinPcap. The configuration interface and live view interface of client software are shown in Figure 3-3. Figure 3-3 iVMS-4200 Control Panel © Hikvision...
  • Page 23 If you use third party VMS software, contact technical support of our branch for camera firmware.  For detailed information about client software of our company, refer to the user manual of the software. This manual mainly introduces accessing to the network camera by web browser. © Hikvision...

  • Page 24: Chapter 4 Basic Operations

    HTTP: Allows the same quality as of TCP without setting specific ports for streaming under some network environments.  Play Performance: Set the play performance to Shortest Delay, Balanced, or Fluent.  Rules: You can enable or disable the rules of dynamic analysis for motion here. © Hikvision...

  • Page 25: Live View Page

    Log in the network camera to enter the live view page, or you can click on the menu bar of the main page to enter the live view page. The functions vary depeding on different camera models. Refer to the actual interface as standard. © Hikvision...

  • Page 26: Starting Live View

    Configure the image size, stream type, plug-in type, and two-way audio of the live video. 4.3 Starting Live View In the live view window as shown in Figure 4-3, click on the toolbar to start the live view of the network. © Hikvision...
  • Page 27 4:3/16:9/ original/self-adaptive window size.  Click to select from and display live video with the main/ sub/third stream. The main stream is with a relatively high resolution and needs much bandwidth. The default setting of stream type is © Hikvision...

  • Page 28: Operating Ptz Control

    Section 6.2.1 Configuring Video Settings.  Setting the OSD text on live video in Section 6.3.2 Configuring OSD Settings. 4.4 Operating PTZ Control Purpose: In the live view interface, you can use the PTZ control buttons to control panning, tilting and zooming. © Hikvision...

  • Page 29: Ptz Control Panel

    Click and the camera keeps PTZ Control Panel panning, the icon turns into Click the icon again to stop the camera. Click , the lens zooms in, click Zoom out/in , and the lens zooms out. © Hikvision...

  • Page 30: Auxiliary Functions

    Table 4-3 Descriptions of Buttons Buttons Description Start the selected patrol/pattern. Stop current patrol/pattern. Set the selected preset/patrol. Delete the selected preset/patrol/pattern. Start recording a pattern. Stop recording the pattern. 4.4.2 Auxiliary Functions The Auxiliary functions panel is shown in Figure 4-5. © Hikvision...
  • Page 31 For detailed information of setting one-touch patrol, refer to 4.4.5 One-touch Patrol.  One-touch Park Click to save the current view as the preset No. 32 and start park at the the current position. © Hikvision...

  • Page 32: Setting/Calling A Preset

    In the PTZ control panel, select a defined preset from the list and click to call the preset. Figure 4-7 Calling a Preset For convenient preset selection, refer to the following steps to navigate to the preset you want. © Hikvision...
  • Page 33 Call patrol 8 Figure 4-8 Special Preset You may need to use the OSD (On Screen Display) menu when controlling the camera remotely. To display the OSD menu on the live view screen, you can call the preset number © Hikvision...

  • Page 34: Setting/Calling A Patrol

    6. Repeat the steps from 3 to 5 to add more presets. 7. Click OK to save all the patrol settings.  Calling a Patrol: In the PTZ control panel, select a defined patrol from the list and click to call the patrol, as shown in Figure 4-10. © Hikvision...

  • Page 35: One-Touch Patrol

    2. Call preset No. 45, and the camera moves as patrol path 8. 3. Click to enter the patrol settings interface and start/stop one-touch patrol, edit the patrol time and the speed. 4. You can click of the PTZ control panel to start one-touch patrol. Figure 4-11 Patrol Path 8 © Hikvision...

  • Page 36: Setting/Calling A Pattern

    5. Click to save all the pattern settings.  Buttons on the Patterns interface: Buttons Description Start the selected patrol/pattern. Stop current patrol/pattern. Set the selected preset/patrol. Delete the selected preset/patrol/pattern. Start recording a pattern. Stop recording the pattern. © Hikvision...

  • Page 37: Playback

    This section explains how to view the video files stored in the network disks or memory cards. 4.5.1 Play Back Video Files Steps: Click on the menu bar to enter playback interface. Figure 4-13 Playback Interface Select the date and click © Hikvision...
  • Page 38 Drag the progress bar with the mouse to locate the exact playback point. You can also input the time and click to locate the playback point in the Set playback time field. You can also click to zoom out/in the progress bar. Figure 4-16 Set Playback Time © Hikvision...

  • Page 39: Downloading Video Files

    Check the checkbox in front of the video files that you need to download. Click to download the video files. 4.6 Pictures Purpose: This section explains how to view the captured picture files stored in the network disks or the © Hikvision...
  • Page 40 Select the file type of capturing the pictures from the list as timing, alarm, motion, etc. Set the start time and end time. Click Search. The corresponding picture files will be listed. Check the checkbox in front of the files that you need to download. Click to download the files. © Hikvision...

  • Page 41: Chapter 5 System Configuration

    Configuration > Storage > Schedule Settings > Record Schedule Figure 5-1 Recording Schedule Interface 2. Check the checkbox of Enable to enable scheduled recording. 3. To set the advanced settings of the camera, click to enter the advanced settings interface. © Hikvision...
  • Page 42 Channel in the Linkage Method of Alarm Input settings interface. For detailed information, refer to Section Alarm Input.  Record Triggered by Motion & Alarm: If you select Motion & Alarm, the video will be recorded when the motion and alarm are triggered at the same time. Besides © Hikvision...

  • Page 43: Configuring Capture Schedule

    After you set the scheduled task, you can click and copy the task to other days (optional). After setting the capture schedule, you can click a capture segment to display the segment capture settings interface to edit the segment capture parameters. (optional) © Hikvision...

  • Page 44: Configuring Net Hdd

    Refer to Section 6.1.2 Configuring FTP Settings for more details to configure FTP parameters. Check Upload to FTP checkbox in Motion Detection Settings or Alarm Input interface. Refer to Section 5.2.1 Configuring Motion Detection. Check the Enable Event-triggered Snapshot checkbox. 5.1.3 Configuring Net HDD Before you start: © Hikvision...
  • Page 45 After having saved successfully, you need to reboot the camera to activate the settings.  Initialize the added network disk. 1. Enter the HDD settings interface (Configuration > Storage > Storage Management > HDD Management), in which you can view the capacity, free space, status, type and property of the disk. © Hikvision...
  • Page 46 Figure 5-8 Quota Settings  Up to 8 NAS disks can be connected to the camera.  To initialize and use the memory card after insert it to the camera, refer to the steps of NAS disk initialization © Hikvision...

  • Page 47: Basic Event Configuration

    You can check the Enable Dynamic Analysis for Motion checkbox if you want the detected object get marked with rectangle in the live view. Select the configuration mode as Normal or Expert and set the corresponding motion detection parameters.  Normal © Hikvision...
  • Page 48 (2) Click to finish drawing. You can click to clear all of the areas. (3) Move the slider to set the sensitivity of the detection.  Expert © Hikvision...
  • Page 49 Percentage: When the size proportion of the moving object exceeds the predefined value, the alarm will be triggered. The less the value is, the easier the alarm will be triggered. Set the Arming Schedule for Motion Detection. (1) Click tab to enter the arming schedule setting interface. © Hikvision...
  • Page 50 (optional). Figure 5-12 Arming Time Schedule (4) After setting the arming schedule, you can click a segment to display the segment arming settings interface to edit the segment record parameters (optional). Figure 5-13 Segment Arming Settings © Hikvision...
  • Page 51 Send an email with alarm information to a user or users when an event occurs. To send the Email when an event occurs, you need to refer to Section Configuring Email Settings to set the Email parameters.  Upload to FTP/Memory/NAS © Hikvision...

  • Page 52: Configuring Video Tampering Alarm

    5.2.2 Configuring Video Tampering Alarm Purpose: You can configure the camera to trigger the alarm actions when the lens is covered. Steps: 1. Enter the Video Tampering settings interface : Configuration > Event > Basic Event > Video Tampering © Hikvision...

  • Page 53: Configuring Alarm Input

    Configuration > Event > Basic Event > Alarm Input 2. Choose the Alarm Input No. and the Alarm Type. The alarm type can be NO (Normally Open) and NC (Normally Closed). 3. Edit the name in to set a name for the alarm input (optional). © Hikvision...
  • Page 54 6. You can also choose the PTZ linking for the alarm input. Check the relative checkbox and select the No. to enable Preset Calling, Patrol Calling or Pattern Calling. 7. You can copy your settings to other alarm inputs. 8. Click to save the settings. Figure 5-17 Linkage Method © Hikvision...

  • Page 55: Configuring Alarm Output

    Refer to Section 5.2.1 Configuring Motion Detection. Figure 5-18 Alarm Output Settings You can copy the settings to other alarm outputs. Click to save the settings. © Hikvision...

  • Page 56: Handling Exception

    2. Check the checkbox to set the actions taken for the Exception alarm. Refer to Section 5.2.1 Configuring Motion Detection. Figure 5-19 Exception Settings Click to save the settings. 5.3 Smart Event Configuration The functions vary depending on different camera models. © Hikvision...

  • Page 57: Detecting Audio Exception

    Sensitivity: Range [1-100], the smaller the value the more severe the sound change will trigger the detection. 5. Click tab to enter the arming schedule setting interface. The time schedule configuration is the same as the settings of the arming schedule for motion © Hikvision...

  • Page 58: Configuring Face Detection

    Intrusion detection can set an area in the surveillance scene and once the area is entered, a set of alarm action is triggered. Steps: 1. Enter the intrusion detection interface: Configuration > Events > Smart Event >Intrusion Detection © Hikvision...
  • Page 59  Sensitivity: Range [1-100]. The value of the sensitivity defines the size of the object which can trigger the alarm, when the sensitivity is high, a very small object can trigger the alarm. 6. Click tab to enter the arming schedule setting interface. The time © Hikvision...

  • Page 60: Configuring Line Crossing Detection

    4. The event triggered and park action related PTZ movement will be locked for 180 seconds after you enter the line crossing detection interface. Optionally, you can click the button to manually activate the movement, or lock the movement when the button turns to by clicking it. Figure 5-23 Configuring Line © Hikvision...

  • Page 61: Configuring Region Entrance Detection

    Steps: 1. Enter the Region Entrance Detection settings interface: Configuration> Event > Smart Event> Region Entrance Detection 2. Check the checkbox of Enable to enable the Region Entrance Detection function. © Hikvision...

  • Page 62: Configuring Region Exiting Detection

    5.3.6 Configuring Region Exiting Detection Purpose: Region exiting detection function detects people, vehicle or other objects which exit from a pre-defined virtual region, and some certain actions can be taken when the alarm is triggered. © Hikvision...
  • Page 63 Notify surveillance center, send email, upload to FTP, trigger channel, smart tracking and trigger alarm output are selectable. Refer to Section 5.2.1 Configuring Motion Detection. 9. Click button to save the settings. © Hikvision...

  • Page 64: Ptz Configuration

    When there is a large amount of zoom, the pan/tilt speed will be slower for keeping the image from moving too fast on the live view image.  Preset Freezing: This function enables the live view to switch directly from one scene © Hikvision...

  • Page 65: Configuring Ptz Limits

    5.4.2 Configuring PTZ Limits Purpose: The speed dome can be programmed to move within the configurable PTZ limits (left/right, up/down). For some certain camera models, disable PTZ limit and then the pan angle reaches 330 °. © Hikvision...

  • Page 66: Configuring Initial Position

    5.4.3 Configuring Initial Position Purpose: The initial position is the origin of PTZ coordinates. It can be the factory default initial position. You can also customize the initial position according to your own demand. © Hikvision...

  • Page 67: Configuring Park Actions

    Scheduled Tasks function is prior to Park Action function. When these two functions are set at the same time, only the Scheduled Tasks function takes effect.  Park function varies depending on different camera models. Steps: 1. Enter the Park Action settings interface: © Hikvision...

  • Page 68: Configuring Privacy Mask

    Privacy mask enables you to cover certain areas on the live video to prevent certain spots in the surveillance area from being live viewed and recorded. Steps: 1. Enter the Privacy Mask settings interface: Configuration > PTZ > Privacy Mask Figure 5-30 Draw the Privacy Mask © Hikvision...

  • Page 69: Configuring Scheduled Tasks

    5.4.6 Configuring Scheduled Tasks Purpose: You can configure the network speed dome to perform a certain action automatically in a user-defined time period. Steps: Enter the Scheduled Task settings interface: Configuration> PTZ > Scheduled Tasks Figure 5-32 Configure Scheduled Tasks © Hikvision...

  • Page 70: Clearing Ptz Configurations

    You can clear PTZ configurations in this interface, including all presets, patrols, privacy masks, PTZ limits, scheduled tasks and park actions. Steps: 1. Enter the Clearing Configuration interface: Configuration > PTZ > Clear Config 2. Check the checkbox of the items you want to clear. © Hikvision...

  • Page 71: Configuring Smart Tracking

    Figure 5-35 Configure Smart Tracking 2. Check the Enable Smart Tracking check box to enable smart tracking function. 3. Click the PTZ buttons to select an object. 4. Click to set the current zoom ratio as the tracking zoom ratio. © Hikvision...

  • Page 72: Prioritize Ptz

    1. Enter the Prioritize PTZ interface: Configuration > PTZ > Prioritize PTZ. Figure 5-36 Position Settings 2. Select Network or RS-485 from the dropdown list 3. Set the delay time (Range 2-200s). 4. Click to save the settings. © Hikvision...

  • Page 73: Chapter 6 Camera Configuration

    IPv6 are both supported. Steps: Enter TCP/IP settings interface: Configuration > Network > Basic Settings > TCP/IP Figure 6-1 TCP/IP Settings 2. Configure the NIC settings, including the IPv4(IPv6) Address, IPv4(IPv6) Subnet Mask and IPv4(IPv6) Default Gateway. © Hikvision...
  • Page 74 Proper configuration of all passwords and other security settings is the responsibility of the installer and/or end-user. Steps: 1. Enter the DDNS settings interface: Configuration > Network > Basic Settings > DDNS 2. Check the Enable DDNS checkbox to enable this feature. © Hikvision...
  • Page 75 Purpose: If you have no router but only a modem, you can use Point-to-Point Protocol over Ethernet (PPPoE) function. Steps: 1. Enter the PPPoE settings interface: Configuration > Network > Basic Settings > PPPoE Figure 6-4 PPPoE Settings © Hikvision...
  • Page 76 Server Port: The default port number is 8000. Click to save the settings. Configuring NAT (Network Address Translation) Settings Purpose: Universal Plug and Play (UPnP™) is a networking architecture that provides compatibility among networking equipment, software and other hardware devices. The UPnP protocol allows devices © Hikvision...

  • Page 77: Advanced Settings

    Before setting the SNMP, use the SNMP software and manage to receive the camera information via SNMP port. By setting the Trap Address, the camera can send the alarm event and exception messages to the surveillance center. The SNMP version you select should be the same as that of the SNMP software. © Hikvision...
  • Page 78 The configuration of the SNMP software should be the same as the settings you configure here. 4. Click to save and finish the settings. Configuring FTP Settings Purpose: You can set a FTP server and configure the following parameters for uploading captured pictures. © Hikvision...
  • Page 79  Root directory: The files will be saved in the root of FTP server.  Parent directory: The files will be saved in a folder in FTP server. The name of folder can be defined as shown in Figure 6-9. Figure 6-9 Parent Directory © Hikvision...
  • Page 80 Configure the DNS Server settings under Configuration> Network > Basic Settings > TCP/IP before using the Email function. Steps: 1. Enter the Email settings interface: Configuration> Network > Advanced Settings > Email Figure 6-11 Email Settings 2. Configure the following settings: © Hikvision...
  • Page 81 Configuring Platform Settings Purpose: Platform access provides you an option to manage the devices via platform. This function varies depending on different speed dome models. Steps: 1. Enter the Platform settings interface: Configuration> Network > Advanced Settings > Platform Access © Hikvision...
  • Page 82 (using a minimum of 8 characters, including upper case letters, lower case letters, numbers and special characters) in order to increase the security of your product.  Proper configuration of all passwords and other security settings is the responsibility of the installer and/or end-user. © Hikvision...
  • Page 83 2) Click Create to create the certificate request, and fulfill the required information. 3) Download the certificate request and submit it to the trusted certificate authority for signature. 4) After receiving the signed valid certificate, import the certificate to the device. 5) Click OK to save the settings. © Hikvision...
  • Page 84 The valid DSCP value ranges from 0 to 63. The DSCP value is bigger, the priority is higher. 3. Click to save the settings.  Make sure that you enable the QoS function of your network device (such as a router).  It will ask for a reboot for the settings to take effect. © Hikvision...
  • Page 85 Proper configuration of all passwords and other security settings is the responsibility of the installer and/or end-user. Steps: Connect the network camera to your PC directly with a network cable. Enter the 802.1X settings interface: Configuration > Network > Advanced Settings > 802.1X © Hikvision...
  • Page 86 If you need to access to the camera through the third party platform, you can enable Hikvision-CGI function. And if you need to access to the device through ONVIF protocol, you can configure ONVIF user in this interface. Refer to ONVIF standard for detailed configuration rules.

  • Page 87: Configuring Video And Audio Settings

    User Manual of Network PTZ Camera Figure 6-19 Integration Protocol Settings 2. Check the Enable Hikvision-CGI checkbox and then select the authentication from the dropdown list. Then you can access to the camera through the third party platform. 3. Check the Enable ONVIF checkbox to enable the function.
  • Page 88 Max. Bitrate: Set the Max. bitrate. The higher value corresponds to the higher video quality, but the higher bandwidth is required. Video Encoding: Select Video Encoding from the dropdown list for different stream type. H.264+/H.265+: © Hikvision...

  • Page 89: Configuring Audio Settings

    6.2.2 Configuring Audio Settings Steps: 1. Enter the Audio settings interface Configuration > Video/Audio > Audio Figure 6-21 Audio Settings 2. Configure the following settings. Audio Encoding: G.722.1, G.711ulaw, G.711alaw, MP2L2, G.726 and PCM are selectable. © Hikvision...

  • Page 90: Configuring Roi Settings

    When Dynamic Region is enabled, image quality of tracking target will be enhanced. ROI function varies depending on different camera models. Enter the ROI settings interface: Configuration >Video/Audio > ROI Figure 6-22 Region of Interest (1) © Hikvision...

  • Page 91: Configuring Image Settings

    Adjust the ROI level from 1 to 6. Check Enable Target Tracking checkbox to enable target tracking, and the target is set as region of interest. Adjust the ROI level from 1 to 6. Click to save the settings. 6.3 Configuring Image Settings © Hikvision...

  • Page 92: Configuring Display Settings

    This feature enhances the difference in color and light between parts of an image. The value ranges from 0 to 100.  Saturation This feature is used to adjust color saturation of the image. The value ranges from 0 to 100.  Sharpness © Hikvision...
  • Page 93 The value of shutter needs to be adjusted manually. The iris and gain values will be adjusted automatically according to the brightness of the environment. Figure 6-26 Manual Shutter  Manual: In Manual mode, you can adjust the values of Gain, Shutter, Iris manually. Figure 6-27 Manual Mode © Hikvision...
  • Page 94 The Day/Night Switch mode can be set to Auto, Day, Night and Scheduled-Switch. This function varies depending on the models of speed dome.  Auto: In Auto mode, the day mode and night mode can switch automatically according to the light condition of environment. Figure 6-29 Auto Mode Sensitivity © Hikvision...
  • Page 95 White Balance The White Balance mode can be set to Auto, MWB, Outdoor, Indoor, Fluorescent Lamp, Sodium Lamp and Auto-Tracking.  Auto: In Auto mode, the camera retains color balance automatically according to the current color temperature. © Hikvision...
  • Page 96 If you are a professional technician, you can set it to Expert Mode then adjust Space DNR Level and Time DNR Level. The level ranges from 0 to 100. Figure 6-34 Expert Mode  Defog Mode You can set the Defog Mode to ON or OFF as you need. © Hikvision...

  • Page 97: Configuring Osd Settings

    6.3.2 Configuring OSD Setting Purpose: The camera supports following on screen displays: Time: Supports for time display. Camera Name: Identifies the name of camera. You can customize the on screen display of time. Steps: 1. Enter the OSD settings interface: © Hikvision...
  • Page 98 4. Select from the dropdown list to set the time format, date format, display mode, OSD size and Font color. 5. You can use the mouse to drag the text frame IPdome in the live view window to adjust the OSD position. Figure 6-38 Adjust OSD Location 6. Click to activate above settings. © Hikvision...

  • Page 99: Configuring Text Overlay Settings

    3. When you enable the function of Link to Preset, select one preset from the dropdown list, check the corresponding checkbox, set the time period and the linked scene for the selected preset. (Up to 4 periods can be configured for one preset.) Figure 6-39 Link to Preset © Hikvision...

  • Page 100: Configuring System Settings

    Web Version, Plugin Version, Number of Channels, Number of HDDs, Number of Alarm Input, Number of Alarm Output, and Firmware Version Property are displayed. The information cannot be changed in this menu. It is the reference for maintenance or modification in future. © Hikvision...
  • Page 101 Configuration > System > System Settings > Time Settings Figure 6-43 Time Settings  Configuring Time Synchronization by NTP Server Steps: (1) Check the radio button to enable the NTP function. (2) Configure the following settings: Server Address: IP address of NTP server. © Hikvision...
  • Page 102 You can also check the Sync with local time checkbox to synchronize the time of the camera with the time of your computer. Figure 6-45 Time Sync Manually  Select the Time Zone Purpose: When the camera is taken to another time zone, you can use the Time Zone function to adjust © Hikvision...
  • Page 103  Transparent channel: Connect a serial device directly to the camera. The serial device will be controlled remotely by the computer through the network. Steps: 1. Enter RS-232 Port setting interface: Configuration> Advanced Configuration> System > RS-232 © Hikvision...
  • Page 104 Figure 6-49 RS-485 Settings 2. Set the RS-485 parameters and click to save the settings. The Baud rate, PTZ Protocol and PTZ Address parameters of the camera should be exactly the same as those of the control device. © Hikvision...

  • Page 105: Maintenance

    Set the saving path to save the configuration file in local storage. Click Diagnose Information to download the log and system information.  Importing Configuration File Enter the Maintenance interface: Configuration > System > Maintenance > Upgrade & Maintenance Click Browse to select the saved configuration file. © Hikvision...
  • Page 106 The operation, alarm, exception and information of the camera can be stored in log files. You can also export the log files on your demand. Before you start: Configure network storage for the camera or insert a memory card in the camera. Steps: 1. Enter the Log interface: Configuration >System > Maintenance > Log © Hikvision...
  • Page 107 3. Input a number in text field as the upper limit of the remote connection number. E.g. when you specify the remote connection number as 10, then the 11th remote connection cannot be established. Figure 6-52 Live View Connection Settings 4. Click button to activate the settings. © Hikvision...

  • Page 108: Security

    2. Check the checkbox of Enable IP Address Filter. 3. Select the type of IP Address Filter in the dropdown list, Forbidden and Allowed are selectable. 4. Set the IP Address Filter list.  Add an IP Address © Hikvision...
  • Page 109 Check the checkbox to enable the Illegal Login Lock function. Illegal Login Lock: Enabling illegal login lock function is to automatically lock the device IP after the admin user performing 7 failed password attempts (5 attempts for the user/operator). Click to save the settings. © Hikvision...

  • Page 110: User Management

    The level indicates the permissions you give to the user. You can define the user as Operator or User. In the Basic Permission field and Camera Configuration field, you can check or uncheck the permissions for the new user. Click to finish the user addition. © Hikvision...
  • Page 111 1. Left-click to select the user from the list and click 2. Modify the User Name, Level or Password. 3. In the Basic Permission field and Camera Configuration field, you can check or uncheck the permissions. 4. Click to finish the user modification. © Hikvision...
  • Page 112 1. Left-click the user name you want to delete and click 2. Click on the pop-up dialogue box to delete the user. Online Users Enter the Online Users configuration interface: Configuration > System > User Management > Online Users © Hikvision...
  • Page 113 You can see the current users who are visiting the device through this interface. User information, such as user name, level, IP address, and operation time, is displayed in the User List. Click Refresh to refresh the list. © Hikvision...

  • Page 114: Appendix

    Search online devices manually You can also click to refresh the online device list manually. The newly searched devices will be added to the list. You can click on each column heading to order the information; you can © Hikvision...
  • Page 115  Proper configuration of all passwords and other security settings is the responsibility of the installer and/or end-user. © Hikvision...
  • Page 116 User Manual of Network PTZ Camera Figure A.1.2 Modify Network Parameters © Hikvision...
  • Page 117 UD09611B...

This manual is also suitable for:

Ds-2de7330iw-ae

Table of Contents