Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Technika Bellissimo TBD4SS-5
Summary of Contents for Technika Bellissimo TBD4SS-5
- Page 1 Instruction Manual Instruction Manual TBD4SS-5 12 place settings...
- Page 2 Quick Operation Guide Quick Operation Guide For detailed operating method read the corresponding content on the instruction manual. Switch on the appliance Open the door, press the On/Off button to switch on the appliance. Compartment A: Compartment A: For each wash cycle. Compartment B: Fill the detergent dispenser For programs with pre-wash only.
-
Page 3: Table Of Contents
. Water Connection..........Start of dishwasher........... If you can not solve the problems by yourself , please contact Technika Customer Care on: 1300 333 244 or service@technika.com.au 8) Troubleshooting Tips........8) Troubleshooting Tips........Before calling for service........ - Page 4 1.IMPORTANT SAFETY INFORMATION 1.IMPORTANT SAFETY INFORMATION READ ALL OF THE INSTRUCTIONS BEFORE USING READ ALL OF THE INSTRUCTIONS BEFORE USING WARNING! WARNING! When using your dishwasher, follow the precautions listed below: GROUNDING INSTRUCTIONS WARNING! This appliance must be grounded. In the event of a Improper connection of the equipment-grounding malfunction or breakdown, grounding will reduce conductor can result in the risk of an electric shock.
-
Page 5: Control Panel
2.Operation Instruction 2.Operation Instruction IMPORTANT IMPORTANT To get the best performance from your dishwasher, read all operating instructions before using it for the first time. Control Panel Control Panel 1.On/Off Button:Turn on/off the power supply by pushing. 7.Function indicator: Rinse aid function indicator 2.Power indicator:it will be light on when the power was Faucet function indicator supplied. -
Page 6: A Fill The Rinse Aid Dispenser
Prior Prior using for the first time using for the first time Before using your dishwasher for the first time: Fill the rinse aid dispenser Fill in detergent A. Rinse Aid Dispenser A. Rinse Aid Dispenser Rinse Aid Dispenser The rinse aid is released during the final rinse to prevent water from forming droplets on your dishes, which can leave spots and streaks. -
Page 7: B Function Of Detergent
NOTE: NOTE: Clean up any rinse aid spilled while during filling with an absorbent cloth to avoid excessive foaming during the next wash. Don't forget to replace the cap before you close dishwasher door. Adjusting Rinse Aid Dispenser The rinse aid dispenser has six or four settings. Always start with the dispenser Adjust lever Adjust lever set on "4". - Page 8 Proper Use of Detergent Use only detergent specifically made for the use in dishwashers. Keep your detergent fresh and dry. Don't put powdered detergent into the dispenser until you're ready to wash dishes. Adding detergent to dispenser Push latch to open Push latch to open Fill in Detergent Fill the detergent dispenser with detergent.
-
Page 9: Attention Before Or After Loading The Dishwasher Baskets
4.Loading the Dishwasher Baskets 4.Loading the Dishwasher Baskets Recommendation Recommendation Consider buying utensils which are identified as dishwasher-proof. Use a mild detergent that is described as 'kind to dishes'. If necessary, seek further information from the detergent manufacturers. For particular items, select a program with as low temperature as possible. To prevent damage, do not take glass and cutlery out of the dishwasher immediately after the program has ended. -
Page 10: The Method Loading Normal Dishware
The Method Loading Normal Dishware The Method Loading Normal Dishware Loading the Lower Basket Loading the Lower Basket Loading the Upper Basket Loading the Upper Basket The upper basket is designed to hold more delicate We suggest that you place large items and the most and lighter dishware such as glasses, coffee and difficult to clean items are to be placed into the lower tea cups and saucers, as well as plates, small bowls... -
Page 11: Wash Cycle Table
5.Starting a washing program 5.Starting a washing program Wash Cycle Table Wash Cycle Table Means: need to fill rinse aid into the Rinse-Aid Dispenser. NOTE: NOTE: Detergent Detergent Cycle Selection Cycle Selection Description Description Running Running Energy Energy Rinse Rinse Water Water Program... -
Page 12: Change The Programme
Change the Program Change the Program Premise: A cycle that is underway can only be modified if it has only been running for a short time. Otherwise, the detergent may have already been released, and the appliance may have already drained the wash water. In this case, the detergent dispenser must be refilled (see the section entitled "... -
Page 13: Maintenance And Cleaning
6.Maintenance and Cleaning 6.Maintenance and Cleaning Filtering System Filtering System The filter prevents larger remnants of food or other objects from getting inside the pum. The residues may block the filter, in this case they must be removed. The filter system consists of a coarse filter, a flat (Main filter) and a microfilter(Fine filter). -
Page 14: Caring For The Dishwasher
Notes: - Inspect the filters for blocking after every time the dishwasher has been used. - By unscrewing the coarse filter, you can remove the filter system. Remove any food remnants and clean the filters under running water. NOTE: NOTE: The entire filter assembly should be cleaned once a week. -
Page 15: Installation Instruction
How to Keep Your Dishwasher in Shape Remove the Plug When not in Use for a LongTime It is recommend that you run a wash cycle with the Before cleaning or performing maintenance, always dishwasher empty and then remove the plug from the remove the plug from the socket. -
Page 16: Water Connection
Improper connection of the equipment earthing conductor can result in the risk of an WARNING! WARNING! for personal safety: electric shock. DO NOT USE AN EXTENSION CORD OR AN ADAPTER PLUG WITH THIS APPLIANCE. Check with a qualified electrician or service representative if you are in doubt whether the DO NOT, UNDER ANY CIRCUMSTANCES, CUT OR REMOVE THE EARTHING appliance is properly earthed. -
Page 17: Start Of Dishwasher
How to Drain Excess Water From Hoses If the sink is more than 1000mm higher than the floor, the excess water in hoses cannot be drained directly into the sink. It will be necessary to drain excess water from hoses into a bowl or suitable container that is held outside and lower than the sink. -
Page 18: Troubleshooting Tips
8.Troubleshooting Tips 8.Troubleshooting Tips Before Calling for Service Before Calling for Service Review the charts on the following pages may save you from calling for service. Problem Possible CausesWhat To Do Dishwasher doesn't Fuse blown, or the Replace fuse or reset circuit breaker. Remove any other circuit breaker acted appliances sharing the same circuit with the dishwasher start... -
Page 19: Error Codes
Problem Possible Causes What To Do The dishes The dishes were not See notes in " Loading the Dishwasher Baskets ". loaded correctly. are not clean The program was Select a more intensive programme. not powerful enough. See" Wash Cycle Table ". Not enough detergent Use more detergent, or change your detergent. -
Page 20: Technical Information
If overflow occurs, turn off the main water supply before calling a service. If there is water in the base pan because of an overfill or small leaks, WARNING! WARNING! the water should be removed before restarting the dishwasher. Technical Information Technical Information Height : 845mm...
Need help?
Do you have a question about the Bellissimo TBD4SS-5 and is the answer not in the manual?
Questions and answers
At the end of a cycle why is the top 2 lights on the right hand side at the top continually flashing?
The dishwasher is tuck on the one mode (heavy Clean) cannot move it to quick-rinse mode.
To change the program on the Technika Bellissimo TBD4SS-5 dishwasher, follow these steps:
1. Ensure the dishwasher is switched on.
2. A running cycle can only be modified if it has been running for a short time.
3. If the dishwasher is stuck on Heavy Clean mode, try pausing the cycle by pressing the Start/Pause button.
4. If the cycle cannot be changed directly, turn off the dishwasher using the On/Off button.
5. Wait a few seconds, then turn the dishwasher back on.
6. Select the desired program (Quick-Rinse) by pressing the Program button until the appropriate indicator lights up.
7. Close the door and press the Start/Pause button to begin the new cycle.
If the issue persists, check the manual for any reset options or power cycle the appliance by unplugging it for a few minutes before restarting.
This answer is automatically generated