Do you have a question about the UHT1-SI and is the answer not in the manual?
Questions and answers
Mary Maddox
February 6, 2025
How do you fill the tank without the water running
Out with the sharper image ultrasonic humififier
1 comments:
Mr. Anderson
February 10, 2025
To fill the tank of the Sharper Image UHT1-SI ultrasonic humidifier without water running out, follow these steps:
1. Unplug the humidifier and place it on a level surface. 2. Grasp the integrated water tank handle and pull the tank toward you to remove it. 3. Turn the water tank upside down. 4. Remove the cap by turning it counterclockwise. 5. Fill the tank with cool tap water (distilled water is recommended for hard water). 6. Replace the cap by turning it clockwise to close securely. 7. Ensure the cap is tightly sealed before turning the tank upright to prevent leaks.
This method prevents spills and ensures proper operation.
CONTENTS Important Safety Instructions .............................4 Features ......................................9 How to Use ....................................11 Cleaning ....................................14 Storage ......................................15 Troubleshooting ..................................16 Warranty.....................................17 English...
READ AND SAVE THESE INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS This owner’s guide and any additional inserts are considered part of the product. They contain important information about safety, use and disposal. Before using the product, please familiarize yourself with all operating and safety instructions. Please keep all documents for future reference and pass these documents on, together with the product, to any future owner.
Page 5
- The appliance, power supply, power cord and plug cannot come into contact with water. Do not use this product on wet surfaces. Do not use this product in a bathtub or shower or position product where it may fall into a bathtub, laundry, swimming pool or other water container. Do not use this product outdoors or expose it to weather or elements.
Page 6
your product. - Before plugging power cord into electrical outlet, be sure that all electrical information on the rating label, including voltage, is compatible with your outlet’s power supply. - Never use the cord as a handle or otherwise yank, strain or stretch the power cord.
Page 7
condense on surfaces, where microorganisms can settle and grow. For accurate readings, use a hygrometer which is available at most hardware stores and home centers. SERVICING WARNING—To reduce risk of fire, electrical shock and injury to persons, observe the following: - Clean your product regularly, only as is instructed in this manual.
Page 8
However, there is no guarantee that interference will not occur in a particular installation. If this product does cause harmful interference to radio or television reception, which can be determined by turning the product off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna.
FEATURES NIGHT LIGHT Optional night light can be turned on and off with power button. ROTATING MIST NOZZLE Manually rotate the nozzle 360° for mist where you need it most. Nozzle is removable. MIST TUBE Guides the mist from inside the humidifier to the mist nozzle. WATER TANK Easy to fill, install, clean and view water level.
HOW TO USE Before use, check humidifier for leaks and visible damage that may have occurred during shipping. DO NOT USE if there is evidence of damage. FILLING WATER TANK 1. Unplug humidifier and place on level surface. Note: Spills can occur during cleaning, moving or refilling water tank, so be careful to avoid spills.
Page 12
HOW TO USE Easily operate and control mist settings and nightlight function with the illuminated touch power button. Touch ( ) to cycle through settings as follows: MODE 1 - Powers humidifier on and high mist setting without nightlight. MODE 2 - High mist setting with nightlight. MODE 3 - Low mist setting without nightlight.
Page 13
HOW TO USE HIGH MIST SETTING Operation for fast humidification of small to medium sized rooms. High-speed operation will evaporate 1.2 gallons of water (+/- 10%) in 24 hours of continuous operation. (This assumes room conditions of 70º F and 30% relative humidity.) LOW MIST SETTING Operation for quiet, nighttime use or smaller rooms.
CLEANING Proper cleaning is essential to the air quality and performance of your humidifier. The frequency in which your humidifier will need to be cleaned will vary depending on use, water hardness and outside environmental factors. It is recommended, assuming average use, to thoroughly clean weekly or when algae, mineral deposits or other particles begin to form.
STORAGE STORAGE During the off-season or after extended periods of non-use, you may choose to store your humidifier. To ensure long life of the product, it is recommended to store your humidifier by following these instructions: TIP: Cleaning is recommended before storage. 1.
TROUBLESHOOTING PROBLEM POSSIBLE CAUSE AND SOLUTION The unit fails to Unit is not plugged in. Plug power cord into electrical outlet. power on. Household circuit breaker/ground fault circuit interrupter has tripped or blown fuse. Reset circuit breaker/ground fault circuit interrupter, or replace fuse. For assistance, contact licensed electrician.
SATISFACTION G U A R A N T E E Vornado Air, LLC warrants to the original consumer or purchaser this Sharper Image® Humidifier (“Product”) is free from defects in material or workmanship for a period of one (1) year from the date of purchase. If any such defect is discovered within the warranty period, Vornado, at its discretion, will repair or replace the Product at no cost.
Page 18
Sharper Image® name and logo are registered trademarks. Manufactured, marketed and distributed under license by Vornado Air LLC, Andover, Kansas 67002. Manufactured in China. U.S. Patents Pending. Sharper Image® Distributed under license by Vornado Air LLC, Andover, Kansas 67002. 18 English...
Need help?
Do you have a question about the UHT1-SI and is the answer not in the manual?
Questions and answers
How do you fill the tank without the water running Out with the sharper image ultrasonic humififier
To fill the tank of the Sharper Image UHT1-SI ultrasonic humidifier without water running out, follow these steps:
1. Unplug the humidifier and place it on a level surface.
2. Grasp the integrated water tank handle and pull the tank toward you to remove it.
3. Turn the water tank upside down.
4. Remove the cap by turning it counterclockwise.
5. Fill the tank with cool tap water (distilled water is recommended for hard water).
6. Replace the cap by turning it clockwise to close securely.
7. Ensure the cap is tightly sealed before turning the tank upright to prevent leaks.
This method prevents spills and ensures proper operation.
This answer is automatically generated