Advertisement
Attention for starting:
(1). Carefully read the operation manual and the
related attention items.
(2). Check if the power voltage is matched the
regulation
before starting.
(3). Clear the obstacles and steel chips around the
machine.
(4). Check all of the oil pipes to see if there is oil
leaking.
(5). Check if all the adjusting switches are ready.
(6). Check if there is any electric wire damaged.
(7). Check if the oil in lubricator is sufficient.
(8). Check if the rotation direction of turret and the
direction of chamfering tool are correct.
(9). Connect the power cord to the amps switch;
the red, black and white line are the power
cords, the green line as ground wire. The
grounding wire lock up to iron place, and turn
on the power switch.
13
Advertisement
