Frequently Asked Questions - Philips TAN7506 User Manual

8 Frequently
asked
questions
My Bluetooth headphone does not turn
on.
The battery level is low. Charge the
headphone.
I cannot pair my Bluetooth headphone
with my Bluetooth device.
The Bluetooth is disabled. Enable the
Bluetooth feature on your Bluetooth
device and turn on the Bluetooth device
before you turn on the headphone.
The Bluetooth device cannot nd the
headphone.
• The headphone may be connected to
a previously paired device. Turn o the
connected device or move it out of
range.
• Pairing may have been reset or the
headphone has been previously
paired with another device. Pair the
headphone with the Bluetooth device
again as described in the user manual.
(see 'Pair the headphone with your
Bluetooth device at the rst time' on
page 5).
The call quality is poor in call.
Make sure you put both earbuds into
both ears. They are responsible for sound
pick up and environment noise cancella-
tion.
My Bluetooth headphone is connected to
a Bluetooth stereo enabled mobile phone,
but music only plays on the mobile phone
speaker.
Refer to the user manual of your mobile
phone. Select to listen to music through
the headphone.
The audio quality is poor and crackling
noise can be heard.
• The Bluetooth device is out of range.
Reduce the distance between your
headphone and Bluetooth device, or
remove obstacles between them.
• Charge your headphone.
The audio quality is poor when streaming
from the mobile phone is very slow, or
audio streaming does not work at all.
Make sure your mobile phone not only
supports (mono) HSP/HFP but also
supports A2DP and is BT4.0x (or higher)
compatible (see 'Technical data' on page
8).