DIVAR IP all-in-one 7000 2U
3
System overview
3.1
Chassis components
This chapter describes the most common components included with your chassis. For more
information, see the installation instructions detailed later in this manual.
Component
Hard drives
DVD-ROM drive
Fans
Air shroud
Power supply
I/O expansion
slots
Mounting rails
Control panel
3.2
Device views
The chassis includes a control panel on the front that features power buttons and status
monitoring LEDs. On the rear there are various I/O ports as well as power supply modules.
Bosch Security Systems B.V.
Description
The chassis includes 8 hard drive bays for SATA hard drives.
These hard drives are hot swappable. Once setup correctly, these drives
can be removed without turning off the system.
In addition, these drives support SES2 (SATA).
Note: For empty chassis, the hard drives must be purchased separately.
For the latest shipping lists, see the datasheet in the online product
catalog.
This drive allows you to quickly install or save data.
The system fans provide cooling for the chassis. These fans circulate air
through the chassis as a means of lowering the chassis internal
temperature.
The system fans are powered from the motherboard. The fans are 2U
high.
Air shrouds are shields, usually plastic, which conduct the airflow
directly to where it is needed to maximize fan efficiency. Always use the
air shroud included with your chassis.
The chassis has redundant power supplies. Redundant power supplies
are hot-swappable, and can be changed without turning off the system.
Each power supply is auto-switching capable. This enables the power to
automatically sense and operate at a 100 V to 240 V input voltage. An
amber light will be illuminated on the power supply when the power is
off. An illuminated green light indicates that the power supply is
operating.
The chassis includes 7 low profile expansion slots.
The unit can be placed in a rack for secure storage and use. To set up
your rack, follow the instructions included in this manual.
The control panel provides a monitoring and control interface. LEDs
indicate system status and buttons control system power.
Installation manual
System overview | en
13
2020.11 | V1.1 | DOC