Get Started; Charge The Battery; Pair The Headphones With Your Mobile Phone - Philips TAH4205BK/00 User Manual

3 Get started

Charge the battery

Note
 Before you use your headphones, place them
in the charging box and charge the battery for
2 hours for optimum battery capacity and
lifetime.
 Use only the original USB-C charging cable to
avoid any damage.
 Finish your call before charging. Connecting
the earpieces to charge will power them o .
 If the headset is not used for a long time, the
rechargeable battery will begin to lose its
charge. To avoid this loss, please fully charge
the battery at least once every three months.
Connect the supplied USB charging
cable to:
• The Type - C USB charging slot on
the headphones and;
• The charger/USB port of a comput-
er.
LED turns white during charging and
turns o when the headphones in
fully charged.
Tip
 Normally, a full charge takes 2 hours.
Pair the headphones with
your mobile phone
Before you use the headphones with
your mobile phone for the rst time, pair
it with a mobile phone. A successful
pairing establishes a unique encrypted
link between the headphones and
mobile phone. The headphones store
the last 8 devices in the memory. If you
try to pair more than 8 devices, the
earliest paired device is replaced by the
new one.
Make sure that the headphones are
fully charged and turned o .
Press and hold
until the blue and white LED ashes
alternately.
The headphone remain in
pairing mode for 5 minutes.
Make sure that the mobile phone is
turned on and its Bluetooth feature
is activated.
Pair the headphones with the
mobile phone. For detailed infor-
mation, refer to the user manual of
your mobile phone.
The following example shows you how
to pair the headphones with your mobile
phone.
Activate the Bluetooth feature of your
mobile phone, select Philips
TAH4205
Philips TAH4205
for 6 seconds