Please take a moment when the product is new to fill in this information. This data will allow faster service when calling ABB Power to order accessories, spare parts, or request field service. First, locate the product information label. This is typically located on the upper front of the equipment frame, or on the rear of the frame.
électrique qui peut causer la blessure ou la mort Sérieuse 4. Use of an attachment other than one approved by ABB POWER will void any and all warranties, implied or other, and will increase risk of fire, or may possibly cause electrical shock, injury, or death to personnel L'usage d'un attachement autrement qu'un approuvé...
1: Theory of Operation The maintenance bypass panel (MBS) is designed to be used with the ABB POWER 827E inverter plant. The main purpose of the MBS is to allow an AC load to be switched from its primary source (Inverters) to an alternate source (commercial AC) and back to the primary source (Inverters) again.
This section contains information that is intended to help the user install the maintenance bypass panel. Included are physical and electrical specifications. FIGURE 2-1: Front View of the 6310408P 10KVA Bypass Panel FIGURE 2-2: Front View of the 6310408P-1 30KVA Bypass Panel 2.2 Maintenance Bypass Panel Description...
NOTE: ABB POWER recommends that the Maintenance Bypass Panel is installed above the top-most 827E Inverter Shelf (refer to Figure 3-1). ABB POWER recommends leaving one rack mounting space between the MBS and the first Inverter shelf as well as from Inverter shelf to inverter shelf to allow air flow between units for proper heat dissipation (refer to Figure 3-1).
3.2 Utility (Commercial AC) Input Connections WARNING: All power should remain in the OFF position for the entire installation section. Serious injury or death could occur from live AC circuits. ABB POWER recommends that Licensed Electricians wire all AC connections into the MBS.
Page 17
– in whole or in parts – is prevail. ABB does not accept any responsibility whatsoever forbidden without prior written consent of ABB. for potential errors or possible lack of information in this document.