Samsung MIM-H05UN User & Installation Manual page 15

3) Set the tenant address. (Unavailable, 0-F)
-
Tenant address
Unavailable
0
1
2
3
4
5
6
7
8
9
A
B
C
D
E
F
-
the Wi-Fi Kit can control and monitor the indoor units with the RMC1 set as 2.
• To set the group channel address for indoor units, see "Setting the indoor unit address" in
Installation Manual of the indoor unit.
NOTE
• To set the tenant address upon request, contact the Samsung service center.
• To control all indoor units with different tenant addresses, make sure that all the Wi-Fi Kits are
registered to the smartphone.
• When using the multi-tenants feature for Wi-Fi Kits, the upper-level controllers (touch centralized
controller, DMS) other than the OnOff controller can be installed at the same time.
Group channel address for the indoor units controlled by a Wi-Fi Kit
Controls all indoor units connected to the outdoor unit
Controls the indoor units with the group channel address "0"
Controls the indoor units with the group channel address "1"
Controls the indoor units with the group channel address "2"
Controls the indoor units with the group channel address "3"
Controls the indoor units with the group channel address "4"
Controls the indoor units with the group channel address "5"
Controls the indoor units with the group channel address "6"
Controls the indoor units with the group channel address "7"
Controls the indoor units with the group channel address "8"
Controls the indoor units with the group channel address "9"
Controls the indoor units with the group channel address "A"
Controls the indoor units with the group channel address "B"
Controls the indoor units with the group channel address "C"
Controls the indoor units with the group channel address "D"
Controls the indoor units with the group channel address "E"
Controls the indoor units with the group channel address "F"
15