Contents 13.2 Smart TV Start Page 1 Get Support 13.3 App Gallery 1.1 Identify and Register your TV 14 Video on Demand 1.2 TV Help and User Manual 1.3 On-line Help and User Manual 15 Netflix 1.4 Consumer Care / Repair 2 Software 16 Amazon Prime Video 2.1 Update Software...
Identify and Register your TV Manual Identify your TV - TV model number and serial To solve any Philips TV related problem, you can number consult our online support. You can select your language and enter your product model number.
Page 4
cause severe injury, irrepairable damage to your TV or void your warranty.
back on again. Please wait. Software Do not . . . • use the remote control • remove the USB memory device from the TV • press twice Update Software • press the power switch on the TV The TV switches itself off (for 10 seconds) and then back on again.
Quick Guide Remote Control Batteries and Cleaning Replace batteries Standby / On If the TV does not react on a key press on the remote To switch the TV on or back to Standby. control, the batteries might be empty. 2 - ...
7 - OPTIONS To open or close the Options menu. IR sensor The TV can receive commands from a remote control Bottom that uses IR (infrared) to send commands. If you use such a remote control, always make sure you point the remote control at the infrared sensor on the front of the TV.
In case you lost this guide, you can download it • Make sure that the power plug, in the wall socket, is from www.philips.com/TVsupport. accessible at all times. Use the model number of the TV to look for •...
Page 9
Although this TV has a very low standby power consumption, unplug the power cable to save energy if you do not use the TV for a long period of time. On or Standby Before you switch on the TV, make sure you plugged in the mains power in the POWER connector on the back of the TV.
Connections Connectivity guide Always connect a device to the TV with the highest quality connection available. Also, use good quality cables to ensure a good transfer of picture and sound. Copy protection When you connect a device, the TV recognizes its type and gives each device a correct type name.
Mobile Device Wi-Fi Direct / Miracast About Wi-Fi Miracast You can view your photos or play your music and videos from a mobile device on your TV with Wi-Fi Miracast™. The mobile device and the TV should be within range, which usually means being in the same room.
• press SOURCES to open the Sources menu favourite app store today. and select a connected device. The Philips TV Remote App is available for iOS and Android and is free of charge. Block a Device * When use your phone as a remote control, TV cannot be switched on or off via your phone.
Page 13
Formatting removes all files from the USB Hard Drive. The USB Hard Drive is formatted exclusively for this TV, you cannot use the stored recordings on another To Pause TV or PC. Do not copy or change recording files on the USB Hard Drive with any PC application.
Switch Source Source List • To open the sources menu, press SOURCES . • To switch to a connected device, select the device with the arrows (Right) or (Left) and press OK. • To view the technical information of the connected device you are watching, press ...
channels Channels 1 - Select Start now and press OK. 2 - Select Update channels to only add new digital channels. 3 - Select Start and press OK to update channels. About Channels and Switch This can take a few minutes. Channels Quick reinstall ...
Page 16
With Channel list copy, you can copy the channels To enter a specific digital frequency yourself, use the installed on one TV onto another Philips TV of the remote control digit keys. Alternatively, select the same range. With Channel list copy, you avoid the...
Page 17
the TV. 3 - To start the channel list upload, • Both TVs have compatible software versions. press (Home) > Settings > All settings > Channels > Expert mode settings > Channel List Copy > Copy to TV and press OK.
Audio Language Universal Access If none of the preferred audio languages are Only available when Universal access set to On. available, you can select another audio language if (Home) > Settings > All settings > Universal available. If no audio languages are available, you access >...
- Press (yellow) key to enter number and - Press (green) key to enter with upper-case symbol - Press (yellow) key to enter number and - Press (blue) key to delete a character symbol 7 - Select Done when complete the editing. - Press ...
Remove Channel from the Favourites Subtitles from Text List If you tune to an analogue channel, you need to make the subtitles available for each channel To remove a channel from the favourites list, select manually. the channel with , then press ...
Page 21
To open T.O.P. Text. • Enlarge To enlarge the Text page for comfortable reading. • Reveal To unhide hidden information on a page. • Language To switch the group of characters that Text uses to display correctly. • Text 2.5 To activate the Text 2.5 for more colours and better graphics.
Change Day TV Guide If the TV guide information comes from the broadcaster, you can press + to view the schedule of one of the next days. Press - to go back to the previous day. What You Need Alternatively, you can press ...
Page 23
Set a Recording You can set a recording in the TV Guide. To record a programme… 1 - Press TV GUIDE and select a future or ongoing programme. 2 - Press the colour key Record . To cancel a recording… 1 - Press ...
To record a programme… Recording and 1 - Press TV GUIDE. 2 - On the TV guide, select the channel and programme you wish to record. Press (Right) Pause TV or (Left) to scroll through the programmes of a channel.
8 - Select Schedule and press OK to schedule the Replay manual recording. The recording will appear in the list of scheduled Since the TV stores the broadcast you are watching, recordings and reminders. you can mostly replay the broadcast for a few seconds.
Photo Options Videos, Photos and With a photo on screen, press OPTIONS to… Music List/Thumbnails View photos with list view or thumbnails view. Shuffle off, Shuffle on 10.1 View the pictures in sequential order, or at random. From a USB Connection Repeat, Play once View the pictures repeatedly or once only.
360 Photo Options Video Options With a 360 photo on screen, press OPTIONS to… During the video playback, press OPTIONS to… List/Thumbnails List/Thumbnails View 360 photos with list view or thumbnails view. View video files with list view or thumbnails view. Shuffle off, Shuffle on Subtitles View the pictures in sequential order, or at random.
ideal sound settings. • Audio out - Set the TV to play the sound on TV or Open TV Setting on the connected audio system. • Ambilight style* - Select one of preset Ambilight Menus styles. • Ambilight+hue* - Switch Ambilight+hue on or off. •...
Page 29
not supported in Monitor mode. The TV is able to play (Home) > Settings > All HDR video in Monitor mode but no HDR processing settings > Picture > Contrast will be applied. Press the arrows (up) or (down) to adjust the contrast value of the picture.
Page 30
Select Normal, Warm, or Cool to set the colour Select Maximum, Medium, or Minimum to set the temperature for your preference. level at which the TV automatically enhances the details in the dark, middle and light areas of the picture. Customise colour temperature ...
Page 31
• Original – automatically zooms in the picture to fit Motion Settings the screen with original aspect ratio. No content lost visible. Motion Styles (Home) > Settings > All (Home) > Settings > All settings > Picture > Picture format > Advanced settings >...
Page 32
• Personal mode - Select to check more advanced Advanced sound settings sound settings Volume Control Restore Personal mode Auto volume 1 - Set the sound style to Personal mode. 2 - Press the colour key Restore Style, and ...
Page 33
• You can set the value in steps of 5ms. Maximum Digital Output Settings setting is 60ms. Digital output settings are available for SPDIF output (optical) and HDMI ARC sound signals. Channels Digital out fomat (Home) > Settings > All HbbTV Settings - Hybrid Broadcast Broadband TV settings >...
Page 34
property of their respective owners. USB Keyboard Settings (Home) > Settings > All settings > General settings > USB keyboard settings HDMI Ultra HD To install the USB keyboard, switch on the TV and (Home) > Settings > All settings > General connect the USB keyboard to one of settings >...
Page 35
Select Screen off, the TV screen is switched off, to switch the TV screen back on, press any key on the Demo Me autostart remote control. (Home) > Settings > All settings > General settings > Shop setup > Demo Me autostart Set TV switch off timer Turn On/Off the Demo Me autostart.
Page 36
Set HDMI Auto game mode to On, if you want TV to secondary subtitle language. If subtitles in one of automatically set Picture style to Game whenever it is these languages are available, the TV will show the informed by the HDMI device connected to TV. This subtitles you selected.
Page 37
PIN code when you try to start an 18+ rated app. This lock is only valid for 18+ rated apps Universal access for blind or partially sighted from the Philips apps. people (Home) > Settings > All settings > Universal access >...
If your router has WPS, you can directly connect to the router without scanning for networks. If you have To enjoy the full capabilities of your Philips Smart TV, devices in your wireless network that use the WEP your TV must be connected to the Internet.
1 - Select Static IP configuration and configure the connection. 2 - You can set the number for IP Address, Netmask, Gateway, DNS 1, or DNS 2. Switch On with Wi-Fi (WoWLAN) (Home) > Settings > All settings > Wireless and networks >...
Page 40
With Clear Internet Memory you clear your Philips server registration and parental rating settings, your video store app logins, all Philips App Gallery favourites, Internet bookmarks and history. Interactive MHEG applications can also save so-called 'cookies', on your TV. These files will also be cleared.
App gallery does not hold what you are looking for, try the World Wide Web and surf the Internet on TV. Smart TV Search With Search, you can search the App Gallery for 13.1 relevant Apps. Setup Smart TV Enter a keyword in the text field, select and press OK to start searching.
Netflix If you have a Netflix menbership subscription, you can enjoy Netflix on this TV. Your TV must be connected to the Internet. To open Netflix, press to open the Netflix App. You can open Netflix immediately from a TV in standby.
Amazon Prime Video With an Amazon prime membership, you gain access to thousands of popular movies and TV show, including exclusive Prime Originals. Press the app icon to open the Amazon Prime Video app. Your TV must be connected to the Internet to use the app.
YouTube YouTube provides a platform to connect to the world. Watch and discover popular videos that uploaded by YouTube users around the world. Use the YouTube app to explore the latest topics on music, news, and more. Press the app icon to open the YouTube app. Your TV must be connected to the Internet to use the app.
Environmental 18.1 End of Use Disposal of your old product and batteries Your product is designed and manufactured with high quality materials and components, which can be recycled and reused. When this crossed-out wheeled bin symbol is attached to a product it means that the product is covered by the European Directive 2012/19/EU.
This TV can display Ultra HD signals. Some devices - notice. For more specification details of this product, connected with HDMI - do not recognise a TV with www.philips.com/TVsupport Ultra HD and might not work correctly or show Power distorted picture or sound.
Philips startup screen > User manual to find the information you are looking When the TV is in standby, a Philips startup screen is for. Select a keyword to go the most relevant page in displayed, then the TV returns to standby mode. This the User manual.
Press (Home) > Settings > Help > Check the TV. • Redo the installation and check if you select the If the video clip stays black, call Philips. Wait until the correct country. clip ends and select Contact info in the Help menu.
If an on screen promotion banner appears 20.7 occasionally or the Picture style automatically HDMI - UHD switches back to Vivid at startup, the TV is in Shop location. Set the TV to Home location for use at HDMI home. •...
20.9 Wi-Fi and Internet Wi-Fi network not found or distorted • Check if the firewalls in your network allow access to the TV's wireless connection. • If the wireless network does not work properly in your home, try the wired network installation. Internet does not work •...
The remote control may contain coin-type batteries from the power outlet immediately. which can easily be swallowed by small children. Contact Philips TV Consumer Care to have the TV Keep these batteries out of reach of children at all checked before use.
Humidity In rare occasions, depending on temperature and humidity, minor condensation can occur on the inside of the TV glass front (on some models). To prevent this, do not expose the TV to direct sunlight, heat or extreme humidity. If condensation occurs, it will disappear spontaneously while the TV is playing for a few hours.
TP Vision, which is the manufacturer of the for early integration in its products. product. TP Vision is the warrantor in relation to the TV with which this booklet was packaged. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V.
23.4 DTS-HD (italics) Copyrights DTS® offers decoding of DTS content for up to 5.1 23.1 discrete channels with support for low bit rate and HDMI streaming media. It supports transcoding of content via digital output such as HDMI for playback on legacy products.
P1003.2/ISO 9945.2 Shell and Tools standard. It offers functional improvements over sh for both Open Source programming and interactive use. In addition, most sh scripts can be run by Bash without modification. 24.1 Source: http://www.gnu.org/software/bash/ Open Source Software c-ares (1.10.0) This television contains open source software.
Page 58
The GNU Find Utilities are the basic directory Source: http://www.gnu.org/software/inetutils/ searching utilities of the GNU operating system. These programs are typically used in conjunction with iptables (1.4.15) other programs to provide modular and powerful For Cross connection. directory search and file locating capabilities to other Source: http://www.netfilter.org/projects/iptables/ commands.
Page 59
libusb. ain_Page This piece of software is made available under the terms and conditions of the libusb license, which can mtd-utils be found below. The aim of the system is to make it simple to provide Source: a driver for new hardware, by providing a generic http://libusb.wiki.sourceforge.net interface between the hardware drivers and the upper http://www.libusb.org/...
Page 60
procps (ps, top) (3.2.8) to run . procps is the package that has a bunch of small This piece of software is made available under the useful utilities that give information about processes terms and conditions of the u-Boot loader license, using the /proc filesystem.
Disclaimer regarding services and/or software offered by third parties Services and/or software offered by third parties may be changed, suspended, or terminated without prior notice. TP Vision does not bear any responsibility in these sorts of situations.
Parental Rating 37 Digital Out Offset 33 Pause TV 25 Dynamic Contrast 30 Philips Support 3 Philips TV Remote App 12 Photos, Videos and Music 26 End of Use 46 Picture Clean, Noise Reduction 30 Energy Saving 34 Picture Contrast Menu 30...
Page 63
Quick Picture Settings 31 Video Contrast 30 Quick Settings Menu 28 Video on Demand 42 View Network Settings 39 Viewing Distance 8 Recordings 24 Register TV 3 Remote Control 6 Wi-Fi 39 Remote Control - IR Sensor 7 Remote Control and Batteries 6 Remote Control Key 6 Rename or replace device icon 14 Repair 3...