Table of Contents
Advertisement
Design and function
Interfaces for automation
5.9.6.1
Ramp function foot-operated remote control RTF 1 / RTF 2
ENTER
0
l
Display
5.10
Interfaces for automation
Damage to the machine due to improper connection!
Unsuitable control leads or incorrect connection of input and output signals can cause
damage to the machine.
•
Only use shielded control leads!
•
If the machine is to be operated with control voltages connection via suitable isolation
amplifiers is required!
•
To control the main or secondary current via control voltages, the relevant inputs must be
enabled (see specification for activation of control voltage).
66
+
Setting/selection
Exit the menu
Exit
Machine configuration (part two)
Settings for machine functions and parameter display
Ramp function Remote control RTF 1
The ramp function can be switched on and off
Switch on
Switching on machine function
Switch off
Switching off machine function
EXIT
Figure 5-33
CAUTION
NAVIGATION
099-000184-EW501
28.08.2014
Advertisement
Table of Contents
Need help?
Do you have a question about the Tetrix 200 Comfort MV 5P TG and is the answer not in the manual?
Questions and answers