Troubleshooting - Modern Forms MORPHEUS II Installation Instructions Manual

15. Troubleshooting

Problem
Fan will not start.
28
Solution
1. Check all electrical connections and ensure proper contact.
WARNING: Before checking any electrical connections, ensure electricity has been turned off at the circuit
breaker before beginning.
2. Check wall control LED indicator light. If LED indicator light is not illuminated when pushing a button,
it is not transmitting a signal. Turn off power from the circuit breaker, then loosen the canopy
and check all electrical connections according to the wiring diagram in the Making the Electrical
Connections section.
3. Assure that there are no more than 2 fans operating on a circuit through the wall control.
Assure that there are no more than 12 fans operating on a circuit through an on/off switch
or a breaker if utilizing the Modern Forms app (without the wall control in the circuit).
4. Assure that the fan is within range of the Wi-Fi (150 ft) or wall control (30 ft).
5. Make sure the fan blades spin freely.
6. Make sure the black antenna on the receiver is not tangled with any other electrical wires and is
extended around the inside of the canopy.
F R -W 18 12; F R -W 18 13