Feedback And Display Of The Turnout Position - Lenz Digital plus LH100 Instructions Manual

Information LH100 V3
If you now want to throw another turnout, then press the 'Cl' key
and enter the new number of the turnout (or signal) that you now
want to actuate.

11.1 Feedback and display of the turnout position

11.1.1 Using non-feedback capable accessory decoders
In this case the last command sent to the accessory decoder is
shown on each LH100.
The display of the turnout position on the LH100 display changes
automatically when the turnout position is changed by another
LH100 (or another XpressNET device, for instance a tower cab).
11.1.2 Using feedback capable accessory decoders
When you are using the feedback capable accessory decoder
LS100, and the feedback bus is connected to the LZ100, turnouts
with end-of-stroke-off drives will show the actual turnout position
as + or - whenever the turnout is called up.
Let's assume that turnout 18 has an end-of-stroke-off drive and is
correctly connected to an accessory decoder LS100. Enter the
number of the turnout (see above). The hand held controller gets
a message from the command station that it is a feedback
capable accessory decoder and now shows the following:
A 'R' on the left shows you that you have called up a turnout
number of a feedback capable accessory decoder.
When calling up the turnout the position may be shown as for
example +. If you now press the '-' key to throw the turnout, then
the display will first change to '-' If you press the '-' buton and the
turnout does not throw, you will see for a short moment '-' in the
display, and this will become a '+' after you stop pressing the
button. This way you can immediately see if a turnout has
changed position or not. The display will also change when you
throw the turnout by hand.
NOTE: Depending on the time that the turnout drive needs to
reach its end of stroke, it may take a little while until the
information in the display is correct.
For information on wiring the feedback bus please see the
operation manuals for the feedback capable devices.
39
DIGITAL plus