ME-50 Marine Amplifier
The ME-50 is a two channel audio amplifier capable of delivering up to 25W
RMS per channel. It has a compact, waterproof design that allows for flexible
mounting possibilities, and makes it simple to expand the audio system
capabilities for any installation.
Uses:
• To add additional loudspeakers to a current audio system
• To provide amplification for a separate audio zone
• As a stand-alone system amplifier for any audio source
Specifications:
• Speaker Impedance ------------------------------------- 2-8 ohm
• Output Power ---------- 2ohm load - 25W RMS/Channel
• Frequency Response ----------------------------- 20Hz-20kHz
• Operating Voltage ---------------------13.8V DC (10V-16V)
• Idle Current (no signal) ----------------------------------- 10mA
• Maximum Current Draw (full power) ------------ 7 amps
* Remote Wire Current ---------------------------------------- 4mA
• Dimensions (approx. w
• Weight ------------------------------------------------- .425Kg /15oz
• Volume Control Cable Length ---------------290cm/114"
Features:
• Powers up to (4) 4ohm
• Internal distortion limiting
• Dedicated gain level control
• External volume control
• Waterproof design for
4ohm load - 15W RMS/Channel
h
d) --- 105mm x 40mm x 120mm
x
x
POLY-PLANAR • PO Box 409 • Hanover, MD 21076 • (410)761-4000
www.polyplanar.com
speakers
circuits
included
marine use
4.15" x 1.5" x 4.75"
Need help?
Do you have a question about the ME-50 and is the answer not in the manual?
Questions and answers