Connecting To An Antenna; Setup (Initial Setup) - Samsung 4 Series Manual

When the TV is initially powered on, basic settings proceed automatically.
✎
Connecting the power cord and antenna.
✎
The PDP device may interfere with an amateur radio or AM radio.
✎
When using two-way radio mobile and portable units or amateur radio or AM radio near by your TV, this may cause the
TV to malfunction.
✎
The position of power input port may differ depending on the model.
Power Input
When the TV is initially powered on, a sequence of on-screen prompts will assist in configuring basic settings. Press the
Setup
is available only when the
✎
To start the Setup, enter the password using the remote control. The default password is 0-0-0-0.
✎
To return to the previous step, press the Previous button.
1. Menu Language: Selecting a menu language
Press the ▲ or ▼ button, then press the ENTERE button. Select the desired OSD (On Screen Display) language.
2. Use Mode: Selecting the usage mode
Press the ▲ or ▼ button, then press the ENTERE button.
• Select the Home Use mode. Store Demo Mode is for retail environments.
• When pressing TV controller, the function menu screen appears. Select the MENU(m) and press it more than 5 seconds
using the controller. The Store Demo mode is set. Cancel the Store Demo by selecting Source(
more than 5 seconds.
• Store Demo is only for shop display. If you select it, several functions are not able to use. Please select Home Use when
you watch at home.

Connecting to an Antenna

Setup (Initial Setup)

Source
is set to TV.
VHF/UHF Antenna
Antenna Cable (Not Supplied)
or
Cable
ANT OUT
P
POWER button.
) and pressing it
s
7
English