Husqvarna ARST5120Xv1 Manual page 3

• Do not use an attachment with safety devices that
are damaged or do not operate correctly.
• Do not operate the attachment without good visibility
or light.
• Be careful when you operate the attachment on or
across gravel.
• The exhaust fumes from the engine of the product
contain carbon monoxide, an odorless, poisonous
and very dangerous gas. Do not run the product in
closed spaces or spaces with not sufficient air flow.
• After you hit an object, stop the engine of the
product, examine the attachment for damages, and
repair the damage before you start the attachment.
• Do not point the chute deflector in the direction of
bystanders or areas where property damage can
occur. Keep children and others away from the work
area.
• If the attachment starts to vibrate abnormally, stop
the engine and check immediately for the cause.
Vibration is generally a warning of trouble.
• Lift the attachment when you move the attachment
across areas that you do no want to remove snow
from.
• Do not remove ice or snow that have frozen hard.
Clear snow before it melts, freezes and becomes
hard.
• Be careful when you operate the attachment on a
slope.
• Use wheel weights when you are operating the
attachment in a slope.
Storage
Follow these steps after the season:
• Use running water to clean the attachment.
CAUTION:
at electrical components or bearings.
Cleaning additives usually increase the
damage.
CAUTION:
pressure washer or a steam cleaner.
Water can go into bearings and electrical
connections and cause corrosion which
cause damage to the attachment.
• Paint all the damaged surfaces to prevent corrosion.
• Put oil or grease on damaged areas on the surface.
Put the attachment in an indoor location in a dry area.
2104 - 003 - 30.03.2023
Do not point the jet
Do not use a high
3