Logitech Harmony 300 - Universal Remote Control Quick Start Guide

Also See for Harmony 300:

Quick start manual (3 pages)

Getting started manual (2 pages)

Setup & installation (10 pages)

Table of Contents

Contents

1 Simple to Set Up. Easy to Use
2 Box Contents
3 Setting Up Your Harmony 300
4 Install the batteries
5 Gather your device information
6 Complete the online setup
7 Try your remote
8 Using Your Harmony 300
9 Do More with Your Harmony 300
10 We're Here to Help
11 Documents / Resources
- 11.1 References
- 11.2 Download manual

Logitech Harmony 300 - Universal Remote Control Quick Start Guide

Simple to Set Up. Easy to Use

Thank you for choosing the Harmony 300 – your answer to effortless home entertainment. After installing batteries and gathering device information, we'll guide you through a stepby-step online setup of the Harmony 300. After this simple setup, you're just a button press away from hours of enjoyment.

Box Contents

Setting Up Your Harmony 300

Install the batteries

Install the batteries
Insert the two AA batteries into the battery compartment located in the back of the Harmony 300.

Gather your device information

Gather your device information
In order for the Harmony 300 to control your entertainment system, we'll need to know the manufacturer and model number of each of the devices you own (such as your TV, cable or satellite receiver, DVD player, or VCR).

Find the manufacturer and model number on the front, back or bottom of each device in your entertainment system.
Write down the information in the table below.

Write down the information in the table

Complete the online setup

Complete the online setup
Before you can use your Harmony 300, you'll need to set it up through our easy online software.

Connect your Harmony 300 to your computer using the supplied USB cable.
Open a Web browser and go to myharmony.com.
Follow the on-screen instructions to create a Harmony account and install the My Harmony software.

Try your remote

Once you've completed the online setup and synced your Harmony 300, please try it out.

Unplug your Harmony 300 from your computer and take it to your entertainment system.
Point your Harmony 300 at your television and try it to confirm that it works.
If you want to make changes, plug it back into your computer and use My Harmony to modify your settings.

Using Your Harmony 300

The Harmony 300 makes it easy to sit back and enjoy better control of your entertainment devices. Controls are intuitive and grouped in ways that make sense.
Power and device buttons give quick access to all important device functions.
Whatever you watch, you're just a button press away from hours of enjoyment.

Watch TV with one click: Turn your TV and cable/ satellite box on with a single button press.
Change your input: Easily cycle through inputs to find the one you need.
Personalize buttons: Jump to your favorite channels. Easily change Picture-in-Picture or change screen sizes.
Get better access: The play area puts your play, pause, skip and other buttons in one area for quick access.
Control devices with ease: To operate a device just click the device you want to operate and you're in control. To turn a device on or off, click the device you want to operate and then press the power button.
Control where you want it: The channel area puts the most popular buttons at your fingertips. You can control the volume or change channels from one location.
Enjoy direct channel selection: A few clicks of the number pad is all it takes to access your channel of choice.

Do More with Your Harmony 300

Use My Harmony to customize your Harmony 300 settings. What you choose to do is up to you. With a number of programmable buttons, you can customize your Harmony 300 to jump right to your favorite channels or perform other functions like switching screen sizes or accessing your DVR recordings with a single click.