Panasonic DMR-BW880 Operating Instructions Manual page 7

Main unit
 
∫ Remote Control signal sensor
20
30
30
20
Distance: Within approx. 7 m in front of the unit
1 Standby/on switch (Í/I) (
Press to switch the unit from on to standby mode
or vice versa. In standby mode, the unit is still
consuming a small amount of power.
2 Disc tray ( 14)
3 Connection for digital video (DV) camcorder
( 62)
4 Blue LED
≥It is possible to set the LED to turn on/off. (
5 Display ( below)
6 Recording indicator
7 Remote control signal sensor (
The unit's display
HDDSD
BD

1 SD card slot indicator
2 EXT LINK indicator
3 Copying indicator
4 Disc indicator
5 Drive (HDD, BD or SD) indicator
6 Remote control signal indicator
 

11, 14)
82)
above)
 

   

Pull to flip down the
front panel.
8 Connection for VCR, Panasonic's video camera,
etc. ( 62)
9 Open/close disc tray (
: SD card slot ( 14)
; USB port ( 14)
< Channel select ( 16)
= Start recording ( 21)/Specify a time to stop
recording ( 21)
> Stop
? Start play
Rear panel terminals (
 
EXT-L
SD USB
PLAY

7 Main display section indicator
Current time/playback counter, various messages
8 Playback indicator
9 USB port indicator
: Timer recording indicator
This indicator lights up when the timer recording
standby is activated.
   
AV3 IN
14)
8, 9, 10, 89)
 
COPY
 
7
VQT2J65