Table of Contents
Advertisement
3.7
Mounting installation
Warning: before starting
installation
B Check that there are no loose or
damaged
appliance
B Confirm the gas type of the heater
matches the gas supply you will be
connecting the heater, see Fig. 2,
page 5.
Front cover should be removed (see
i
instructions on page 6) in order to inspect
components visually.
Warning: Do not install this appliance
on a carpeted wall. The heater must be
mounted on a wall using appropriate
anchoring materials.
If wall is sheathed with plaster or drywall, it is
recommended that two support boards, either 1"x4" or
1/2" (minimum) plywood first be attached across a pair
of studs, see Fig. 22.
B Secure the wall mounting bracket provided with the
heater to the wall surface. The heater must be kept
level on the wall surface (see Fig. 23).
B Hang the appliance on the bracket, see Fig. 24.
Fig. 22 Distance between support boards
6 720 608 542
parts
inside
the
Studs 16"
(406mm) on
center
Fig. 23 Leveling the mounting bracket on the studs
Fig. 24 Mounting the heater
Warning: Appliance must be installed
vertically.
Installation instructions
17
Advertisement
Table of Contents
