2 Setting up the
monitor
2.1 Installation
1
Package contents
*DP
*USB C-A
*Different according to region
Note
Use only the AC/DC adapter model:
Philips FSP230-AJAN3-T.
Monitor
8000 Series
Quick start
Register your product and get support at www.philips.com/welcome
AC/DC Adapter
* HDMI
* USB A-B
*USB C-C/A
*USB C-C
2
Install the base
1. Place the monitor face down on a
smooth surface. Pay attention not to
scratch or damage the screen.
2. Hold the stand with both hands.
(1) Gently attach the base to the
27E1N8900
(2) Use your fingers to tighten the
(3) Use a screwdriver to tighten the
(4) Gently attach the stand to the
Caution
Place the monitor face down on a
smooth surface. Pay attention not to
scratch or damage the screen.
5
stand.
screw located at the bottom of
the base.
screw located at the bottom of
the base, and secure the base to
the stand tightly.
VESA mount area until the latch
locks the stand.