Tavool 03041907 - Laser Level Manual

SAFETY

• Read the Safety Instructions and Manual thoroughly before using this product.
  All users must fully understand and adhere to these instructions.
• While the product is in operation, be careful not to expose your eyes to the emitting laser beam. Exposure to a laser beam for an extended time may be hazardous to your eyes.
• Do not stare directly into the beam or view directly with optical instruments or set up the laser at eye level.
• Do not disassemble the laser tool. There are no user serviceable parts inside.
• Do not modify the laser in any way. Modifying the tool may result in hazardous Laser Radiation Exposure.
• Do not operate the laser around children or allow children to operate the laser.
• An exposure to the beam of a Class 2 laser is considered safe for a maximum of 0.25 seconds. Eyelid reflexes will normally provide adequate protection.

SPECIFICATION

PRODUCT OVERVIEW

OPERATING

Before insert two pieces of AA batteries correctly, Please make sure Lock Switch at ' ' position.
And please keep the Lock Switch at ' ' position during moving the laser level or storage it.
It is very important!

Auto Self-leveling Mode

Turn Lock Switch at ' ' position, vertical and horizontal laser beams both light up, and the machine will be self-leveling. Key indication light is green.( If key indication light is red, and lines flash, it indicates the lines is not level, please put laser level on much flatter place, because the self-leveling rang is about 4⁰) Turn Lock Switch at ' ' position, laser level stop working.

Locked Mode

When Lock Switch at ' ' position, long-press key button, vertical and horizontal laser beams both light up and flash every 5 seconds, the indication light is red.
Note: In this mode, the horizontal laser beam is fixed, and you can get any angle of cross lines
Long time press key button, switch it off.

Power saving mode

When the tool is working, short-press key button, this tool enters the energy-saving mode:

1. The first press, the brightness reduces to 80% of the maximum brightness;
2. The second press, reduces to 65%;
3. The third press, reduces to 50%;
4. The fourth press, returns to the maximum brightness

COMMON QUESTIONS AND ANSWERS

How to make it self-leveling? I failed even it is at ' ' position
The range of its auto self-leveling is ±4°. When the tool inclines more than 4°, the laser line will flash. Then please put laser level on much flatter place

I can't turn this tool off, what should I do?
It is different to turn it off in 2 modes.
If you use the auto self-leveling mode and the lock switch is at ' 'position, Please turn lock switch at ' ' position and it will stop working
If you use the locked mode and the lock switch is at ' '. Please press key button for long time and it will stop working.

Can I put this tool on a tall tripod when I want to install the cabinet?
Yes, this tool could be used on a tripod to get the height that you want, and it also has a 1/4' mounting thread for you to install the stand(include in the package)

Is Green Laser light safer than red

No matter the color, a laser beam should never be looked at directly. A glancing view will not damage just do not look at any period of time. And the GREEN laser light is more visible than the red.

What I should do when I have some problems about the laser level? Or there are something lost in the package?
Contact us directly. Any questions or problems, please feel free to contact us via email: service@tavool.com. We offer 2 year warranty and will provide you the best solution according to your exact issue. WE NEVER LET OUR CUSTOMER SUFFER ANY LOSS!

MAINTENANCE

• The laser tool is sealed and calibrated at the plant to the accuracy specified.
• It's recommended to carry out a accuracy check before its first use and periodic checks during future use especially for precise layouts.
• Do not short any battery terminals or charge alkaline batteries or dispose of batteries in fire.
• Do not mix old and new batteries. Replace all of them at the same time with new batteries of the same brand and type.
• Keep batteries out of reach of children.
• Remove batteries if the tool will not be used for several months.
• Do not store the laser tool in direct sunlight or expose it to high temperatures.

The housing and some internal parts are made of plastics and may become deformed at high temperatures.

• Exterior plastic parts may be cleaned with a damp cloth. Although these parts are solvent resistant, NEVER use solvents. Use a soft, dry cloth to remove moisture from the tool before storage.
• Do not dispose of this product with household waste.
• Always dispose of batteries per local code.

Documents / Resources

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download Tavool 03041907 - Laser Level Manual