Husqvarna AUTOMOWER 450XH Operator's Manual
  1. Manuals
  2. Brands
  3. Husqvarna Manuals
  4. Lawn Mower
  5. AUTOMOWER 450XH
  6. Operator's manual
Husqvarna AUTOMOWER 450XH Operator's Manual

Husqvarna AUTOMOWER 450XH Operator's Manual

Hide thumbs Also See for AUTOMOWER 450XH:
Table of Contents

Advertisement

Quick Links

Download this manual
Operator's manual
®
HUSQVARNA AUTOMOWER
430XH/450XH
EN, English
Read the operator's manual carefully and make sure that you
understand the instructions before you use the product.

Advertisement

Table of Contents
loading

Related Manuals for Husqvarna AUTOMOWER 450XH

Summary of Contents for Husqvarna AUTOMOWER 450XH

  • Page 1 Operator's manual ® HUSQVARNA AUTOMOWER 430XH/450XH EN, English Read the operator's manual carefully and make sure that you understand the instructions before you use the product.

  • Page 2: Table Of Contents

    Contents 5.1 Introduction - maintenance........35 1 Introduction 5.2 Clean the product..........35 1.1 Support..............3 5.3 Replacement of the blades......... 36 1.2 Product description..........3 5.4 Battery..............36 ® 1.3 Automower Connect........... 3 5.5 Winter service............. 36 1.4 Product overview...........4 6 Troubleshooting 1.5 Symbols on the product........5 1.6 Symbols on the display.........

  • Page 3: Introduction

    The serial number and the product number are on the product rating plate and on the product carton. • Register your product on www.husqvarna.com. Enter the serial number of the product, the product number and the date of purchase to register your product.

  • Page 4: Product Overview

    1.4 Product overview Automower® 430XH Automower® 450XH The numbers in the figure represent: 16. Blade disc 17. Skid plate Body 18. Contact plates Hatch to display and keypad 19. LED for operation check of the charging station Stop button and boundary wire Front wheels 20.

  • Page 5: Symbols On The Product

    29. Couplers for the loop wire The chassis contains components which 30. Loop wire for boundary loop and guide wire are sensitive to electrostatic discharge 31. Stakes (ESD). The chassis must also be resealed in a professional manner. For these 32.

  • Page 6: Symbols On The Battery

    In the accessories menu you can set the Problem with the connection to the settings for the accessories of the product. Internet server. The schedule is set for the product to not cut the grass. Problem with the SIM card or the module. 1.7 Symbols on the battery The product overrides the schedule.

  • Page 7: Menu Structure Overview 1

    1.9 Menu structure overview 1 Schedule Overview Schedule settings Overview (per day) Period 1 Period 2 Copy to Reset Current All week days Cutting height Cutting height TargetHeight Security Advanced Security level New loop Change Duration Medium High Custom signal PIN code Duration Duration...

  • Page 8: Menu Structure Overview 2

    1.10 Menu structure overview 2 Weather timer Cutting time Medium High Installation Find charging station Advanced Lawn coverage Overview of search method GPS Auto Overview of Guide Boundary Charger lawn coverage Charging Area 1-5 station range Delay time Disable More How? Disable More...

  • Page 9: Menu Structure Overview 3

    1.11 Menu structure overview 3 Settings Profiles ECO mode Spiral cutting Slope control General Profile A, B or C Time & Language Country & Reset all About user setting date Timezone Select Rename Save Intensity Time format Date format Set time Set date Low- Medium...

  • Page 10: Display

    1.12 Display The display on the product shows information and settings of the product. To access the display, push the STOP button. 1.13 Keypad Use the keypad on the product to navigate in the menu. To access the keypad, push the STOP button. •...

  • Page 11: Safety

    • If there is a risk of thunderstorm, Husqvarna or mental capabilities or lack of experience and recommends that the power supply and all the knowledge, if they have been given supervision...

  • Page 12: Safety Instructions For Installation

    Refer to To park the product on page 34 . Husqvarna recommends to set the product to operate when the work area has no activity. The product can cause injury to animals at night in work 12 - Safety 1230 - 004 - 04.03.2022...

  • Page 13: How To Lift And Move The Product

    2.7 How to lift and move the product WARNING: The product must be switched off before lifting it. The product is disabled when the Main switch is in position CAUTION: Do not lift the product when it is parked in the charging station. It can damage the charging station and/or the product.

  • Page 14: Installation

    When the product has cut the grass for some time, the perceived sound level is much lower. Note: Refer to www.husqvarna.com for more information about installation. 3.4 Before the installation of the wires You can select to attach the wires with stakes or bury 3.2 Main components for installation...
  • Page 15 3.4.3 To examine where to put the • Put the charging station in an area with protection from the sun. boundary wire • If the charging station is installed on an island, make sure to connect the guide wire to the island. CAUTION: If the work area is adjacent To make an island on page 17 .
  • Page 16 " 10 cm / 4 " max 1 cm / 0.4 • If you have a paving stone path that is in level with the lawn, put the boundary wire below the paving stone. Note: If the paving stone is minimum 30 cm / 12 Drive Past in.
  • Page 17 the slope. You can use a wall or a fence as a This will prevent damage to the blades of the barrier. product. 3.4.3.2 Passages A passage is a section that has boundary wire on each side and that connects 2 parts of the work area. The distance between the boundary wire on each side in the passage must be a minimum of 60 cm / 24 in.
  • Page 18 • Put the boundary wire around the secondary area 3.4.5 Work area examples To make an island (B) to make an island. Refer to on page 17 . • If the charging station is put in a small area (A), make sure that the distance to the boundary wire Note: The boundary wire must be put as 1 loop...

  • Page 19: Installation Of The Product

    When connecting the power supply, only use a power outlet that is connected to an residual-current (RCD) device. Read and understand the instructions about the To examine where to put charging station. Refer to the charging station on page 14 . Put the charging station in the selected area.

  • Page 20: To Put The Wire Into Position With Stakes

    Put the boundary wire around all of the work 10. Connect the guide wires to the boundary wire with area. Start and complete the installation behind the a coupler. charging station. Open the connector and put the boundary wire in the connector.

  • Page 21: To Bury The Boundary Wire Or The Guide Wire

    CAUTION: Cutting the grass too low right after installation can damage the wire insulation. Damage to the insulation may not cause disruptions until several weeks or months later. Put the boundary wire and the guide wire on the ground. Put the stakes at a maximum of 75 cm / 30 in. distance from each other.

  • Page 22: Product Settings

    ® Download the Automower Connect app on your mobile device. 3.9.3 Calibration Sign up for a Husqvarna account in the The calibration process is automatic. After the basic ® Automower Connect app. settings are done, the product moves away from the An e-mail is sent to the registered e-mail address.
  • Page 23 3.12.3 Schedule Example: A lawn of 1000 m / 10800 ft , cut with a Automower ® 430XH. 1000 m / 133 ≈ 7.5 h. 10800 ft / 1430 ≈ 7.5 h. Days / week h / day Suggested sched- Note: ule setting The lawn should not be cut too often to obtain...
  • Page 24 Alarm - An alarm goes off if the PIN-code is not • CAUTION: During the first weeks after entered within 10 seconds after the STOP button is a new installation, the cutting height must be pushed. The alarm also goes off when the product set to MAX to avoid damaging the loop wire.
  • Page 25 Weather timer . Do not restrict the schedule more Use the arrow buttons and the OK button to move through the menu structure Security > Advanced > than necessary. Duration > Duration of alarm . Use the arrow buttons to select a time interval of 1 The first operation of the day is set by the schedule to 20 minutes.
  • Page 26 3.12.8.1 Profiles Note: ECO mode to save energy and avoid With the function Profiles, different sets of product interference with other equipment, for example hearing settings can be saved. This can be used when one loops or garage doors. product is used for more than one work areas and charging stations.
  • Page 27 3.12.8.4 Slope control Use the arrow buttons to select unit format and then push the BACK button. In order to decrease lawn wear near the boundary wire in slopes, the product prevents to move in the opposite To reset all user settings Slope direction when the product operates in a slope.
  • Page 28 Measure the area. Divide the measured area with the total work area. Convert the result to percentage. Note: The sum of Area 1-5 must be 100% or less. If the sum is less than 100%, the product sometimes starts to mow at the charging station. To set the exit angle on page 30 .
  • Page 29 To get access to the menu in the Do steps 1–3 in To do a test of the guide wire display of the product on page 22 . Do steps 1–3 in To get access to the menu in the display of the product on page 22 .
  • Page 30 3.12.10.1 Information display of the product on page 22 . This menu handles accessories mounted on the product. Contact your local Husqvarna representative for Use the arrow buttons and the OK button to move Installation > Advanced more information on available accessories.
  • Page 31 Use the arrow buttons and the OK button to use and send data via the mobile net. Settings for move through the menu structure Accessories Husqvarna SIM is default. > Automower Connect > GeoFence > Activate ® 3.12.10.3 Ultrasonic Automower 450XH GeoFence .
  • Page 32 Use the OK button to enable or disable the Flashes when fault function. ® 3.12.10.5 To avoid collisions with the Automower house ® The wear on the product and the Automower house decreases when you select Avoid collisions with mower . To get access to the menu in the Do steps 1–3 in display of the product on page 22 .

  • Page 33: Operation

    4 Operation 4.1 Main switch Push the OK button. Close the hatch on the product. WARNING: Read the safety Note: instructions carefully before you start the If the product is parked in the charging station, product. the product will start to operate when the battery is fully charged and if the Schedule settings is set for operation.

  • Page 34: To Park The Product

    4.3.4 Spot cutting Spot cutting to cut a selected Use the operating mode area in a spiral pattern. You must move the product manually to the selected area before you start the Spot cutting operating mode. Note: After the product has operated in the operating Spot cutting , it will automatically start to cut in the mode Main area or Secondary area .

  • Page 35: Maintenance

    Use a soft brush to clean the product. • Remove grass, twigs and other objects from the Husqvarna recommends to use a special cleaning and charging station. maintenance kit, available as accessory. Speak to your Husqvarna representative for more information.

  • Page 36: Replacement Of The Blades

    Replace worn or damaged blades for a safe operation. Replace the blades regularly for a satisfactory cut result Take your product to your Husqvarna central service for and a low energy use. All 3 blades and screws must service prior to winter storage. Regular winter service...

  • Page 37: Troubleshooting

    FAQ (Frequently Asked Questions) on www.husqvarna.com. 6.2 Fault messages The list below shows a number of fault messages that may be shown in the app. Speak to your local Husqvarna representative if the same message shows frequently. Message...
  • Page 38 Message Cause Action No loop signal The power supply or the low-voltage cable is Examine the LED status on the charging sta- not connected. tion. If there is no power to the charging station, the LED is not lit. Examine the pow- er outlet connection and if a residual-current device is engaged.
  • Page 39 Message Cause Action Outside work area The boundary wire connections to the charg- Make sure that the boundary wire is connec- ing station are crossed. ted correctly to the charging station. Refer to To install the boundary wire on page 19 . The boundary wire is too close to the edge of Make sure that the boundary wire is put To install the boun-...
  • Page 40 Message Cause Action Charging station The contact between the charging strips and Put the product in the charging station and blocked contact strips may be poor and the product check that the charging plates and contact has made a number of attempts to charge. plates make good contact.
  • Page 41 Message Cause Action Electronic problem Temporary electronic or firmware related is- Restart the product. sue in the product. Loop sensor prob- If the problem stays, speak to your approved lem, front/rear servicing dealer. Charging system problem Tilt sensor problem Temporary problem Wheel drive problem, right/left Invalid device combi-...

  • Page 42: Information Messages

    6.3 Information messages Messages menu in the Automower ® The list below shows a number of information messages that may be found in the Connect app. Contact your local Husqvarna representative if the same message appears often. Message Cause Action Low battery The product cannot find the charging station.
  • Page 43 No action required. complished guide wire. GPS navigation prob- Problem with the GPS assisted navigation Contact your local Husqvarna representative equipment. if this message appears often. Weak GPS signal The sky is blocked in large parts of the work If possible, remove objects that can cause a area.

  • Page 44: Indicator Lamp In The Charging Station

    The indicator lamp in the charging station must show a solid or flashing green light for a correct installation. If not, follow the instructions in the troubleshooting guide below. Speak to your Husqvarna customer service for more information. Light Cause...

  • Page 45: Symptoms

    If your product does not work as expected, follow the symptoms guide below. There is a FAQ (Frequently Asked Questions) on www.husqvarna.com which provides more detailed answers to a number of standard questions. Contact Husqvarna customer service if you still cannot find the reason for the fault. Symptoms...

  • Page 46: Find Breaks In The Loop Wire

    Symptoms Cause Action Schedule Uneven mowing re- The product works too few hours per day. Increase the mowing time. Refer to on page 23 . sults. The shape of the work area requires the use Steer the product to a remote area. Refer to Lawn coverage function for the product to Lawn Coverage on page 27 .
  • Page 47 Guide To rectify the fault you will need boundary wire, connector(s) and coupler(s): a) If the suspected boundary wire is short then it is easiest to exchange all of the boundary wire between AL and the point where the guide wire is connected to the boundary wire (thick black line).
  • Page 48 Continue until only a very short section of the wire remains which is the difference between a solid green light and a flashing blue light. Then follow instruction in step 5 below. If indicator lamp still flashes blue in step 3 above: Put AL and G back in their original positions.

  • Page 49: Transportation, Storage And Disposal

    7.3.1 To remove the battery CAUTION: Only remove the battery when you dispose the product. When you remove the warranty seal, the Husqvarna warranty is no longer applicable. To switch off the Switch off the product. Refer to product on page 34 .

  • Page 50: Technical Data

    8 Technical data 8.1 Technical data ® ® Dimensions Automower 430XH Automower 450XH Length, cm / in. 75 / 29.5 75 / 29.5 Width, cm / in. 63 / 24.8 63 / 24.8 Height, cm / in. 33 / 13 33 / 13 Weight, kg / lbs 14.7 / 5.8...
  • Page 51 ® ® Sound data Automower 430XH Automower 450XH Measured sound power noise level, dB (A) Noise emissions uncertainties KWA, dB (A) Guaranteed sound power noise level Sound pressure noise level at the operator’s ear , dB (A) ® ® Mowing Automower 430XH Automower...

  • Page 52: Registered Trademarks

    Power Class 3 23 dBm Husqvarna AB does not guarantee full compatibility between the product and other types of wireless systems such as remote controls, radio transmitters, hearing loops, underground electric animal fencing or similar. The products are made in England or the Czech Republic. See information on the rating plate. Refer to...

  • Page 53: Warranty

    The blades and wheels are seen as disposable and are not covered by the warranty. If an error occurs with your Husqvarna product, please contact Husqvarna customer service for further instructions. Please have the receipt and the product’s serial number at hand when contacting Husqvarna customer service.
  • Page 54 54 - Warranty 1230 - 004 - 04.03.2022...
  • Page 55 1230 - 004 - 04.03.2022 Warranty - 55...
  • Page 56 AUTOMOWER ® is a trademark owned by Husqvarna AB. © Copyright 2022 HUSQVARNA. All rights reserved. www.husqvarna.com Original instructions 1142747-95 2022-03-16...

This manual is also suitable for:

Automower 430xn430xh450xh

Table of Contents