Configuring The Appliance; Launching The Acc Es Admin Web Ui - Motorola Avigilon ACC VMA-ENVR1-8P4 User Manual

Configuring the Appliance

The ACC ES 8 Port Appliance can be configured through the ACC ES Admin Web UI that is accessible from
any compatible browser on the network. The ACC ES Admin Web UI allows you to configure the ACC ES 8
Port Appliance server settings, set how the server keeps time, and allows you to remotely restart or
upgrade the server. It also allows you to download the ACC Client software to the workstation you are using
to access the ACC ES Admin Web UI.
Start backing up the system settings for the recorder after you configure it. These settings include the ACC
password, and the settings for the camera connections. For more information on backing up the site and
server configurations, see the Avigilon ACC Client User Guide.
Throughout this section, the term device is used to identify the appliance.
Launching the ACC ES Admin Web UI
You can access the ACC ES Admin Web UI from a network workstation with network access to the device.
The first time you access the ACC ES Admin Web UI of your device, use one of the following methods:
Discovering the Device
l
1. Open the Network tab in File Explorer (Windows) or Finder (Macintosh) to locate the device.
You are looking for a network device labeled "VMA-ENVR1-8P-<serial number>" or "VMA-
ENVR1-8P8B-<serial number>".
2. Right click and select View Device Webpage to open the device sign in page in your default
web browser.
Using the IP Address or Hostname
l
1. Open a web browser from a network workstation with network access to the device.
2. Enter its IP address or hostname into the web browser to open the device sign in page:
https://<Device IP address >|<Device hostname>/
For example: https://169.254.100.100/ or https://my_AvigilonDevice/ ,
where my_AvigilonDevice/ is the hostname configured in the Device panel.
Note: If you forgot the IP address or hostname that was configured during the
installation process, the information is listed in the ACC Client software, in the server
Setup tab.
Tip: Bookmark the device sign in page.
Configuring the Appliance 9