Frost Precautions; Troubleshooting - Zanussi ZWF91483WH User Manual

2.
3.
20°
4.

FROST PRECAUTIONS

If the appliance is installed in an area where the
temperature can be less than 0 °C, remove the

TROUBLESHOOTING

WARNING! Refer to Safety chapters.
ALARM CODES AND POSSIBLE FAILURES
The appliance does not start or it stops during operation. First try to find a solution to the problem (refer to
the tables).
WARNING! Deactivate the appliance before carrying out any check.
22
45°
remaining water from the inlet hose and the drain
pump.
Do this procedure also when you want
to do the emergency drain.
1. Disconnect the mains plug from the mains
socket.
2. Remove the water inlet hose.
3. Remove the drain hose from the rear support
and unhook it from sink or spigot.
4. Put the ends of the drain and inlet hose in a
container. Let the water flow out of the hoses.
5. Set any selected programme with option Drain
& Spin and let it operate until the end of the
cycle.
6. When no more water flows, install the inlet
hose and the drain hose again.
7. Press the On/Off button to deactivate the
appliance.
WARNING! Make sure that the
temperature is more than 0°C before
you use the appliance again. The
manufacturer is not responsible for
damages caused by low temperatures.