Setting Up The Toilet - Dometic CTLP4110 Installation Manual
Sanitation cassette toilet
Hide thumbs
Also See for CTLP4110:
- Operating manual (324 pages) ,
- Installation manual (252 pages) ,
- Short operating manual (60 pages)
Table of Contents
Advertisement
Installing the toilet
5.3
Setting up the toilet
A
NOTICE!
All components of the system must be installed in frost-free areas. In
freezing temperatures, there is a risk of damage caused by frost.
3
I
NOTE
• When installing the toilet in a wet room, the manufacturer recom-
mends that you connect the toilet to the shower tray.
• The toilet base is equipped with a protruding collar for receiving the
upper edge of the shower tray (fig. 3).
➤ Install the toilet according to the description for the respective model version.
➤ Set up the toilet so that it is flush to a vertical wall only.
➤ Leave enough space so that actuation of the draining slider is not restricted.
➤ For the installation, use the dimensional drawings:
8
CT4000
EN
- Quick Links:
- Installation Instructions
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the CTLP4110 and is the answer not in the manual?
Questions and answers
Hi , My Dometic ctelp 4110 switch was not working so I replaced it with a new Dometic ctlp 4110 switch but the new switch is not working. I have power to the input and a red light is on at the top left side of the new switch, but it does not operate, any suggestion please ?