Summary of Contents for Sercomm SAX1V1R
- Page 1 SAX1V1R User Manual Copyright© 2020 by Sercomm Corp. All rights reserved. Page 1 Sercomm Confidential Proprietary...
- Page 2 Section 15.407 of the FCC Rules. Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 41cm between the radiator & your body Page 2 Sercomm Confidential Proprietary...
- Page 3 Product Spec Product Spec: Wi-Fi: 802.11 a/b/g/n/ac/ax (2.4G & 5GHz) WAN: 2.5G*1 LAN: 1G*3, Reset Button: 1 Power: DC IN 12V/3A Status LED: 1 (RGB LED) Label and Location: Page 3 Sercomm Confidential Proprietary...
- Page 4 Chapter 1: Item in the Box You will see following items when opening the box SAX1V1R 802.11ax router: 1 Power adaptor (DC IN: 12V/3A): 1 Ethernet Cable: 1 Wall-mount bracket: 1 Wall-mount screw and washer: 1 Page 4 Sercomm Confidential Proprietary...
- Page 5 2. Connect the LAN cable to the RJ45 port (Ethernet) 3. Tight up the SAX1V1R with wall mount bracket (Option) 4. Connect the power adaptor DC plug with SAX1V1R Power connector, connect the power adaptor to AC Plug Chapter 3: LED Behavior When Boot Up Device LED MUST illuminate in 2 seconds or less when it has started receiving power from mains.
- Page 6 Chapter 4: Install Wall Mount Bracket User has to prepare wall mount kit as below before install wall-mount bracket. Once wall mount kit installed on the wall, user can install the wall mount screw and washer on SAX1V1R. Page 6...
Need help?
Do you have a question about the SAX1V1R and is the answer not in the manual?
Questions and answers