Recording Settings; Advanced Recording Settings; Viewing The Current Activity; Navigating Using Tracback - Garmin GPSMAP 67 Owner's Manual

Recording Settings

Select Setup > Recording.
Record Method: Sets the recording method. The Auto option records points at a variable rate to create an
optimum representation of your path. You can also record points at specific time or distance intervals.
Interval: Sets the recording rate. Recording points more frequently creates a more-detailed path, but fills the
recording log faster.
Auto Pause: Sets the device to stop recording your path when you are not moving.
Auto Start: Sets the device to start a new recording automatically when the previous recording ends.
Activity Type: Sets the default activity type for the device.
Advanced Setup: Enables you to open additional recording settings

Advanced Recording Settings

Select Setup > Recording > Advanced Setup.
Output Format: Sets the device to save the recording as a FIT or a GPX/FIT file
option records your activity with fitness information that is tailored for the Garmin Connect
can be used for navigation. The FIT and GPX option records your activity as both a traditional track that can
be viewed on the map and used for navigation, and as an activity with fitness information.
GPX Auto Archive: Sets an automatic archive method to organize your recordings. Recordings are saved and
cleared automatically.
Trip Recording: Sets a trip recording option.
Recorded Data Reset: Sets a reset option. The Activity and Trip option resets the recording and trip data when
you finish the active recording. The Prompted option prompts you to select the data to reset.

Viewing the Current Activity

By default, the device automatically starts recording your path as an activity when it is turned on and has
acquired satellite signals. You can pause and start recording manually.
1 Select Recording Controls.
2 Select and to view an option:
• To control the current activity recording, select
• To view data fields for the activity, select
• To view the current activity on the map, select
• To view the elevation plot for the current activity, select

Navigating Using TracBack

While recording, you can navigate back to the beginning of your activity. This can be helpful when finding your
way back to camp or the trail head.
1 Select Recording Controls.
2 Select to switch to the map tab.
3 Select TracBack.
The map displays your route with a magenta line, start point, and end point.
4 Navigate using the map or the compass.

Stopping the Current Activity

1 From the main pages, select ENTER > Stop.
2 Select an option:
• To resume recording, select Resume.
• To save the activity, select
TIP: You can view the saved activity by selecting Recorded Activities.
• To delete the activity and reset the trip computer, select
14
.
.
.
®
.
(Advanced Recording Settings,
(File Types,
.
.
page 14).
page 35). The FIT
™ application and
Navigation