GE GFQ14ESSNWW Owner's Manual & Installation Instructions page 11

Front load steam washer & condenser dryer
Table of Contents

Advertisement

Available languages

Available languages

Getting started
Soil
C
Soil
Changing the Soil level increases or decreases the wash time to remove different amounts
of soil.
To change the Soil level, press the Soil level pad until you have reached the desired setting.
You can choose between Extra Light, Light, Normal, Heavy or Extra Heavy soil.
Temp
D
Temp
Adjust to select the proper water temperature for the wash cycle. The rinse water is always
cold to help reduce energy usage and reduce setting of stains and wrinkles.
Follow the fabric manufacturer's care label when selecting the wash temperature.
To change the wash temperature, press the Temp pad until you have reached the desired
setting. You can choose between Cold, Cool, Warm, Hot or Extra Hot.
Spin
E
Spin
Changing the Spin setting changes the final spin speed of the cycles. Always follow the
garment manufacturer's care label when changing the Spin setting.
To change the Spin setting, press the Spin setting pad until you have reached the desired
setting. You can choose between No Spin, Low, Medium, High or Max. Higher spin speeds
are not available on certain cycles, such as Delicates.
Higher spin speeds remove more water from the clothes and will help reduce dry time, but
may also increase the possibility of setting wrinkles on some fabrics.
Dry
F
Dry
Changing Dry will change the temperature for your dry cycle:
Options
G
Options
Press to select your desired options:
49-3000230 Rev 6
Normal For regular to heavy cottons, synthetics, blends, and items labeled permanent
press.
Low
For delicates, synthetics, and items labeled Tumble Dry Low.
Tumble Items are continuously tumbled without heat.
Off
Unit will skip dry cycle and wash only.
Time
Time Saver uses more water and energy to reduce cycle time while
Saver
maintaining wash and rinse performance.
Extra
This feature reduces the amount of residual detergent on the clothes at the
Rinse
end of the wash by adding a third rinse step after the main wash. Default
setting, the machine runs a two-rinse step at the end of wash.
Ex Tumble
This function provides periodic tumbling for up to 8 hours after the entire
cycle has completed to keep clothes fresh and deter wrinkles from setting.
Use this function when you are not able to take out your clothes as soon as
the cycle ends.
11

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Gfq14

Table of Contents