Onkyo TX-NR595 Instruction Manual
  1. Manuals
  2. Brands
  3. Onkyo Manuals
  4. Stereo Receiver
  5. TX-NR595
  6. Instruction manual

Onkyo TX-NR595 Instruction Manual

Hide thumbs Also See for TX-NR595:
Table of Contents

Advertisement

Quick Links

AV RECEIVER
TX-NR595
Instruction Manual
En
Table of contents
Connections
- Connecting Speakers
Playback
Setup
Troubleshooting
Appendix
Supplementary Information
Front Panel≫ Rear Panel≫ Remote≫
≫
≫
≫
≫
≫
≫
≫
≫

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the TX-NR595 and is the answer not in the manual?

Questions and answers

Related Manuals for Onkyo TX-NR595

Summary of Contents for Onkyo TX-NR595

  • Page 1 AV RECEIVER ≫ Table of contents TX-NR595 ≫ Connections Instruction Manual ≫ - Connecting Speakers ≫ Playback ≫ Setup ≫ Troubleshooting ≫ Appendix ≫ Supplementary Information Front Panel≫ Rear Panel≫ Remote≫...

  • Page 2: Table Of Contents

    Contents Connections Playback Setup ≫ ≫ ≫ ≫ What’s in the box Connecting an AV Component in a Separate Room (Multi-zone Connection) Additional Function (Firmware Update) Connecting a TV (ZONE 2) Update Information of the firmware Connecting ZONE B Operation of added new functions Connecting a Pre-main Amplifier (ZONE B) Firmware Update Procedure Connecting Antennas...
  • Page 3 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Multi-zone Basic Operations Device and Supported Format Playing Back Playing back files on a PC and NAS (Music Server) ZONE B Playback Windows Media Player settings Playing Back ® Playing Back Convenience functions Supported Audio Formats Adjusting the tone Play Queue...

  • Page 4: Troubleshooting

    Contents Connections Playback Setup ≫ ≫ ≫ ≫ Quick Menu Menu operations Web Setup Menu operations Initial Setup with Auto Start-up Wizard Operations Troubleshooting When the unit is operating erratically Troubleshooting Appendix Reducing the Power Consumption in Standby State 142 About HDMI General Specifications Front Panel≫...

  • Page 5: What's In The Box

    Contents Connections Playback Setup ≫ ≫ ≫ ≫ What’s in the box 1. Main unit (1) 2. Remote controller (RC-972R) (1), Batteries (AAA/R03) (2) 3. Speaker setup microphone (1) • Used during Initial Setup. 4. Indoor FM antenna (1) 5. AM loop antenna (1) •...

  • Page 6: Additional Function (Firmware Update)

    Contents Connections Playback Setup ≫ ≫ ≫ ≫ Additional Function (Firmware Update) This unit is equipped with a function to update the firmware via network or USB port when the firmware update is announced after purchase. This enables various functions to be added and operations to be improved. Depending on the manufacturing timing of the product, the firmware may be switched to the updated one.

  • Page 7: Firmware Update Procedure

    Contents Connections Playback Setup ≫ ≫ ≫ ≫ Firmware Update Procedure The update may take approx. 20 minutes to complete via network or via USB Update port. Existing settings are guaranteed in either updating method. 1. Press When this unit is connected to the network, notifications of firmware updates may The Setup menu is displayed on the TV screen.
  • Page 8 Contents Connections Playback Setup ≫ ≫ ≫ ≫ 4. Press ON/STANDBY on the main unit to turn the unit into standby mode. • Turn off control devices (PC etc.) connected to the network. • Stop an Internet radio, USB storage device, or server content being played. The process is completed, and your firmware is updated to the latest version.
  • Page 9 Contents Connections Playback Setup ≫ ≫ ≫ ≫ • Do not use on the remote controller. 5. Press The Setup menu is displayed on the TV screen. If an Error Message is Displayed If an error occurs, "- Error!" is displayed on the display of the unit. ("" Setup represents an alphanumeric character.) Refer to the following descriptions and check.

  • Page 10: Part Names

    Contents Connections Playback Setup ≫ ≫ ≫ ≫ Part Names Front Panel ❏ For details, see ( p11) Front Panel≫ Rear Panel≫ Remote≫...
  • Page 11 Contents Connections Playback Setup ≫ ≫ ≫ ≫ ON/STANDBY button 15. PHONES jack: Connect headphones with a standard plug (ø1/4"/6.3 mm). 16. Input selector buttons: Switches the input to be played. 2. MUSIC OPTIMIZER button/indicator (North American models): Turns on/off 17.

  • Page 12: Display

    Contents Connections Playback Setup ≫ ≫ ≫ ≫ Display 1. Speaker/Channel display: Displays the output channel that corresponds to the FM ST: Receiving FM stereo. selected listening mode. SLEEP: Sleep timer is set. ( p119) 2. Lights in the following conditions. AUTO STBY: Auto Standby is set.

  • Page 13: Rear Panel

    Contents Connections Playback Setup ≫ ≫ ≫ ≫ Rear Panel (North American models) 90° 180° ❏ For details, see ( p15) Front Panel≫ Rear Panel≫ Remote≫...
  • Page 14 Contents Connections Playback Setup ≫ ≫ ≫ ≫ (Asian models) 90° 180° ❏ For details, see ( p15) Front Panel≫ Rear Panel≫ Remote≫...
  • Page 15 Contents Connections Playback Setup ≫ ≫ ≫ ≫ 1. DIGITAL IN OPTICAL/COAXIAL jacks: Input TV or AV component digital audio signals with a digital optical cable or digital coaxial cable. 2. TUNER AM/FM terminal: Connect the supplied antennas. 3. USB port: Connect a USB storage device to play music files. ( p56) You can also supply power (5 V/1 A) to USB devices with a USB cable.

  • Page 16: Remote Controller

    Contents Connections Playback Setup ≫ ≫ ≫ ≫ Remote Controller ON/STANDBY button  2. Input selector buttons: Switches the input to be played.  3. Play buttons: Used for playback operations for the Music Server ( p59)  or USB device ( p56).

  • Page 17: Connections

    Contents Connections Playback Setup ≫ ≫ ≫ ≫ Connections Connecting speakers Connecting the TV Connecting Playback Devices Connecting an AV Component in a Separate Room (Multi-zone Connection) Connecting ZONE B Connecting Antennas Network Connection Connecting the Power Cord Front Panel≫ Rear Panel≫ Remote≫...

  • Page 18: Connecting Speakers

    Contents Connections Playback Setup ≫ ≫ ≫ ≫ Connecting speakers You can select the layout of speakers to be installed from various patterns when using this unit. Use the following flow chart to select the speaker layout that suits your speakers and usage environment.

  • Page 19: Speaker Installation

    Contents Connections Playback Setup ≫ ≫ ≫ ≫ Speaker Installation „ 5.1 Channel System This is a basic 5.1 Channel System. Front speakers output the front stereo sound, and a center speaker outputs the sound of the center of the screen, such as dialogs and vocals.
  • Page 20 Contents Connections Playback Setup ≫ ≫ ≫ ≫ „ 7.1 Channel System This is a 7.1 Channel System that consists of the basic 5.1 Channel System p19) and added surround back speakers. Front speakers output the front stereo sound, and a center speaker outputs the sound of the center of the screen, such as dialogs and vocals.
  • Page 21 Contents Connections Playback Setup ≫ ≫ ≫ ≫ „ 5.1.2 Channel System A 5.1.2 Channel System is a speaker layout consisting of the basic 5.1 Channel System ( p19) and added height speakers. Select the height speakers that suit your speakers and usage environment from the following three types. ❏...
  • Page 22 Contents Connections Playback Setup ≫ ≫ ≫ ≫ ❏ Front High Speakers/Rear High Speakers This is a system with the basic 5.1 channel system ( p19) consisting of front speakers, a center speaker, surround speakers and a powered subwoofer, Installation Example and added front high speakers or rear high speakers combined.
  • Page 23 Contents Connections Playback Setup ≫ ≫ ≫ ≫ ❏ Ceiling Speakers Installation Example This is a system with the basic 5.1 channel system ( p19) consisting of front speakers, a center speaker, surround speakers and a powered subwoofer, and added top front speakers or top middle speakers or top rear speakers combined. Installing the height speakers will enrich the sound field feeling in the upper space.
  • Page 24 Contents Connections Playback Setup ≫ ≫ ≫ ≫ ❏ Dolby Enabled Speakers (Dolby Speakers) This is a system with the basic 5.1 channel system ( p19) consisting of front speakers, a center speaker, surround speakers and a powered subwoofer, and Installation Example added Dolby enabled speakers (front) or Dolby enabled speakers (surround) combined.

  • Page 25: Speaker Connections And "Speaker Setup" Settings

    Contents Connections Playback Setup ≫ ≫ ≫ ≫ Speaker Connections and "Speaker Setup" Settings Connections „ (Note) Speaker Impedance Connect speakers with an impedance of 4 Ω to 16 Ω. If any of the speakers to be connected has an impedance of 4 Ω or more and less than 6 Ω, set "Speaker Impedance"...
  • Page 26 Contents Connections Playback Setup ≫ ≫ ≫ ≫ „ Connect the Subwoofer a Subwoofer cable Connect a powered subwoofer with this unit using a subwoofer cable. Up to two powered subwoofers can be connected. The same signal is output from each SUBWOOFER PRE OUT jack.
  • Page 27 Contents Connections Playback Setup ≫ ≫ ≫ ≫ „ 5.1 Channel System "Speaker Setup" settings during „ Initial Setup ( p128) Speaker Setup Speaker Channels 5.1 ch < > Subwoofer Height Speaker Zone Speaker Bi-Amp Speaker Impedance 6ohms or above Select how many speakers you have.
  • Page 28 Contents Connections Playback Setup ≫ ≫ ≫ ≫ „ 5.1 Channel System + ZONE SPEAKER (North American models) MAIN ROOM "Speaker Setup" settings during „ Initial Setup ( p128) Speaker Setup Speaker Channels 5.1 ch < > Subwoofer Height Speaker Zone Speaker Zone 2 Bi-Amp...
  • Page 29 Contents Connections Playback Setup ≫ ≫ ≫ ≫ „ 5.1 Channel System + ZONE SPEAKER (Asian models) MAIN ROOM "Speaker Setup" settings during „ Initial Setup ( p128) Speaker Setup Speaker Channels 5.1 ch < > Subwoofer Height Speaker Zone Speaker Zone 2 Bi-Amp Speaker Impedance...
  • Page 30 Contents Connections Playback Setup ≫ ≫ ≫ ≫ „ 5.1 Channel System (Bi-Amping the Speakers) "Speaker Setup" settings during „ Initial Setup ( p128) Speaker Setup Speaker Channels 5.1 ch < > Subwoofer Height Speaker Zone Speaker Bi-Amp Speaker Impedance 6ohms or above Select how many speakers you have.
  • Page 31 Contents Connections Playback Setup ≫ ≫ ≫ ≫ „ 7.1 Channel System "Speaker Setup" settings during „ Initial Setup ( p128) Speaker Setup Speaker Channels 7.1 ch < > Subwoofer Height Speaker Zone Speaker Bi-Amp Speaker Impedance 6ohms or above Select how many speakers you have.
  • Page 32 Contents Connections Playback Setup ≫ ≫ ≫ ≫ „ 7.1 Channel System + ZONE SPEAKER (For North American models only) MAIN ROOM "Speaker Setup" settings during „ Initial Setup ( p128) Speaker Setup Speaker Channels 7.1 ch < > Subwoofer Height Speaker Zone Speaker Zone 2...
  • Page 33 Contents Connections Playback Setup ≫ ≫ ≫ ≫ „ 5.1.2 Channel System "Speaker Setup" settings during „ Initial Setup ( p128) Speaker Setup Speaker Channels 5.1.2 ch < > Subwoofer Height Speaker Front High Zone Speaker Bi-Amp Speaker Impedance 6ohms or above Select how many speakers you have.
  • Page 34 Contents Connections Playback Setup ≫ ≫ ≫ ≫ „ 5.1.2 Channel System + ZONE SPEAKER (For North American models only) MAIN ROOM "Speaker Setup" settings during „ Initial Setup ( p128) Speaker Setup Speaker Channels 5.1.2 ch < > Subwoofer Height Speaker Front High Zone Speaker...

  • Page 35: Speaker Combinations

    Contents Connections Playback Setup ≫ ≫ ≫ ≫ Speaker combinations • Up to two powered subwoofers can be connected in either combination. (North American models) SURROUND ZONE 2 Speaker Channels FRONT CENTER SURROUND HEIGHT Bi-AMP BACK (ZONE SPEAKER) 2.1 ch (*1) (*1) 3.1 ch...
  • Page 36 Contents Connections Playback Setup ≫ ≫ ≫ ≫ (Asian models) SURROUND ZONE 2 Speaker Channels FRONT CENTER SURROUND HEIGHT Bi-AMP BACK (ZONE SPEAKER) 2.1 ch (*1) (*1) 3.1 ch (*1) (*1) 4.1 ch (*1) (*1) 5.1 ch (*1) (*1) 6.1 ch 7.1 ch 2.1.2 ch 3.1.2 ch...

  • Page 37: Connecting The Tv

    Contents Connections Playback Setup ≫ ≫ ≫ ≫ Connecting the TV Connect this unit between a TV and AV component. Connecting this unit with the TV can output the video and audio signals of the AV component to the TV, or play the audio of the TV on this unit.

  • Page 38: To Arc Tv

    Contents Connections Playback Setup ≫ ≫ ≫ ≫ To ARC TV If the TV supports the ARC (Audio Return Channel) function (*), use only the HDMI cable to connect with the TV. Use the ARC-compatible HDMI IN jack of the TV for connection.

  • Page 39: To Non-Arc Tv

    Contents Connections Playback Setup ≫ ≫ ≫ ≫ To Non-ARC TV If the TV does not support the ARC (Audio Return Channel) function (*), connect an HDMI cable and digital optical cable. • If you use a cable set-top box, etc. connected to the input jack of this unit to watch TV (without using a TV’s built-in tuner), connection with a digital optical cable or analog audio cable is not required.

  • Page 40: Connecting Playback Devices

    Contents Connections Playback Setup ≫ ≫ ≫ ≫ Connecting Playback Devices Connecting an AV Component with HDMI Jack Mounted This is a connection example of an AV component equipped with an HDMI jack. When connecting with an AV component that conforms to the CEC (Consumer Electronics Control) standard, you can use the HDMI CEC function (*) that enables linking with input selectors, etc.

  • Page 41: Connecting An Audio Component

    Contents Connections Playback Setup ≫ ≫ ≫ ≫ Connecting an Audio Component This is a connection example of an audio component. Connect a CD player using a analog audio cable. You can also connect a turntable that has an MM-type cartridge to the PHONO jack.

  • Page 42: Connecting An Av Component In A Separate Room (Multi-Zone Connection)

    Contents Connections Playback Setup ≫ ≫ ≫ ≫ Connecting an AV Component in a Separate Room (Multi-zone Connection) Connecting a TV (ZONE 2) While a disc is played on a Blu-ray Disc player in the main room (where this unit is located), you can play the video and audio of the same Blu-ray Disc player or another AV component on the TV equipped with an HDMI IN jack in a separate room (ZONE 2).

  • Page 43: Connecting Zone B

    Contents Connections Playback Setup ≫ ≫ ≫ ≫ Connecting ZONE B Connecting a Pre-main Amplifier (ZONE B) While performing playback through speakers (ZONE A) connected to the unit, you can enjoy the audio of the same source with the pre-main amplifier (ZONE B) connected to the ZONE B LINE OUT jack at the same time.

  • Page 44: Connecting Antennas

    Contents Connections Playback Setup ≫ ≫ ≫ ≫ Connecting Antennas Connect the antenna to this unit, and set up the antenna at the best position for listening while receiving radio signals. Attach the indoor FM antenna to the wall using push pins or adhesive tape. (North American (Asian models) models)

  • Page 45: Network Connection

    Contents Connections Playback Setup ≫ ≫ ≫ ≫ Network Connection This unit can be connected to the network using a wired LAN or Wi-Fi (wireless LAN). You can enjoy network functions such as Internet radio by network connection. If connection is made by the wired LAN, connect the router and the ETHERNET jack with the LAN cable as shown in the illustration.

  • Page 46: Connecting The Power Cord

    Contents Connections Playback Setup ≫ ≫ ≫ ≫ Connecting the Power Cord Connect the power cord after all the connections are completed. a Power cord Front Panel≫ Rear Panel≫ Remote≫...

  • Page 47: Playback

    Contents Connections Playback Setup ≫ ≫ ≫ ≫ Playback AV Component Playback BLUETOOTH Playback ® Internet Radio Spotify AirPlay ® DTS Play-Fi ® FlareConnect USB Storage Device Playing back files on a PC and NAS (Music Server) Play Queue Amazon Music Connecting your Unit to a Sonos System Listening To the AM/FM Radio Multi-zone...

  • Page 48: Av Component Playback

    Contents Connections Playback Setup ≫ ≫ ≫ ≫ AV Component Playback You can play the audio from AV components, such as Blu-ray disc players through this unit. • When a TV is connected to the HDMI OUT SUB jack, use the HDMI MAIN/SUB button or "Quick Menu" ( p124) to switch between MAIN and SUB.

  • Page 49: Bluetooth Playback

    If a password is requested, enter "0000". • This unit is displayed as "Onkyo TX-NR595 XXXXXX". This display can p118) or the Onkyo be changed with the Friendly Name function ( Controller (can be used with the iOS or Android™).

  • Page 50: Internet Radio

    Contents Connections Playback Setup ≫ ≫ ≫ ≫ Internet Radio By connecting this unit to an Internet-connected network, you can enjoy Internet radio services, such as TuneIn Radio, etc. • To play Internet radio services, the network needs to be connected to the Internet. •...
  • Page 51 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Internet Radio Service Menu You can bookmark specific stations, or delete stations that have been bookmarked. The displayed menu varies according to the service being selected. The menu icon is displayed while a station is being played. When only this icon is displayed, pressing ENTER will display the menu on the screen.

  • Page 52: Spotify

    Contents Connections Playback Setup ≫ ≫ ≫ ≫ Spotify Use your phone, tablet or computer as a remote control for Spotify. Go to spotify.com/connect to learn how. Front Panel≫ Rear Panel≫ Remote≫...

  • Page 53: Airplay

    Confirm that this unit and the PC are connected to the same network beforehand. Then, press NET on this unit. Next, click the AirPlay icon iTunes, select this unit from the displayed devices, and start play of a music file. iPhone Onkyo TX-NR595 XXXXXX e.g., iOS 10 Front Panel≫ Rear Panel≫ Remote≫...

  • Page 54: Dts Play-Fi

    "Group playback" that plays the same music in separate • To use a music streaming distribution service, user registration may be rooms at home. To enjoy this function, download Onkyo Music Control App required. (available on iOS or Android™).

  • Page 55: Flareconnect Tm

    ≫ ≫ FlareConnect When downloading Onkyo Controller (available on iOS or Android™) to mobile devices, such as a smartphone and tablet, you can enjoy the group playback that plays the same music on multiple audio products supporting the FlareConnect function. You can play audio from external playback devices connected to each product, music from an Internet radio or network audio service such as a music streaming distribution service, and music in the music library on a mobile device.

  • Page 56: Usb Storage Device

    Contents Connections Playback Setup ≫ ≫ ≫ ≫ USB Storage Device You can play music files stored on a USB storage device. Basic Operations Perform the following procedure when this unit is on. 1. Switch the input on the TV to the input connected to the unit. TV’s REMOTE 2.
  • Page 57 Contents Connections Playback Setup ≫ ≫ ≫ ≫ • To return to the previous screen, press • To display an album title, artist name and album art of a file in WAV format, make the folder structure and file names as shown below when saving music files.
  • Page 58 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Device and Supported Format USB Storage Device Requirements WAV (.wav/.WAV): WAV files contain uncompressed PCM digital audio. • This unit can use USB storage devices that comply with the USB mass • Supported sampling rates: 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz, storage class standard.
  • Page 59 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Playing back files on a PC and NAS (Music Server) Streaming play of music files stored on PCs or NAS devices connected to the same network as this unit is supported. • The network servers supported by this unit are PCs that incorporate players equipped with the server functions such as Windows Media Player 11 or 12, or NASes ®...
  • Page 60 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Playing Back Perform the following procedure when this unit is on. 1. Switch the input on the TV to the input connected to the unit. TV’s REMOTE 2. Start the server (Windows Media Player 11, Windows Media Player 12, or ®...
  • Page 61 Contents Connections Playback Setup ≫ ≫ ≫ ≫ 6. Select the target server with the cursors, and press ENTER to display the Player 12, it must be configured beforehand. items list screen. Setting PC • This unit cannot access pictures and videos stored on servers. 1.
  • Page 62 Contents Connections Playback Setup ≫ ≫ ≫ ≫ – It is playing a music file on a USB storage device. • Depending on the version of Windows Media Player, the names of items to ® select may differ from the above description. ❏...
  • Page 63 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Supported Audio Formats This unit supports the following music file formats. Remote play of FLAC and Apple Lossless (.m4a/.mp4/.M4A/.MP4): DSD is not supported. • Supported sampling rates: 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz •...
  • Page 64 Or, select the "NET" input, and tap the "USB" icon or "Music Server" icon. (Depending on the model, the icon names may be different.) When downloading Onkyo Controller (available on iOS or Android™) to mobile devices, such as a smartphone and tablet, you can save your favorite playlist...
  • Page 65 Contents Connections Playback Setup ≫ ≫ ≫ ≫ • If there are no tracks on the Play Queue list, only "Play Now " is 3. To delete a track, slide the track to the left until the trash icon changes to " ".
  • Page 66 Network menu and select 5. Tap "NET" or "NETWORK" at the top of the Onkyo Controller screen, and after "Amazon Music" from the menu. Front Panel≫ Rear Panel≫ Remote≫...
  • Page 67 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Connecting your Unit to a Sonos System Setting up your Unit to work with the Once your unit is connected to the Sonos Connect you will be able to send any music or source on your Sonos App to the unit. By going through the Sonos Sonos Connect Connect, you can play your unit through other Sonos devices in the network in the same group, or you can just play on your unit.
  • Page 68 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Now the fun part - listening to Sonos on your Unit 1. Using your Sonos App select the music you want to listen to and send it to the room (or group) where your unit is located. We recommend naming your unit / Sonos Connect combination a friendly name like TV Room or Living Room where the equipment is located.
  • Page 69 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Listening To the AM/FM Radio You can receive AM and FM radio stations on this unit with the built-in tuner. Tuning into a Radio Station Perform the following procedure when this unit is on. Tuning Automatically 1.
  • Page 70 Contents Connections Playback Setup ≫ ≫ ≫ ≫ When FM broadcasts reception is poor: Perform the procedure for "Tuning Manually" ( p70). Note that if you tune manually, the reception for FM broadcasts will be monaural rather than stereo, irrespective of the sensitivity of the reception.
  • Page 71 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Presetting a Radio Station Registration Procedure You can preset up to 40 of your favorite AM/FM radio stations. After tuning in to the AM/FM radio station you want to register, perform the following procedure.
  • Page 72 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Selecting a Preset Radio Station 1. Press TUNER. 2. Press the cursors to select a preset number. Deleting a Preset Radio Station 1. Press TUNER. 2. Press the cursors to select the preset number to delete. 3.
  • Page 73 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Using RDS (Asian models) RDS stands for Radio Data System, and is a method of transmitting data in FM • If no stations are found, the message "Not Found" is displayed. radio signals. In regions where RDS can be used, when you tune in to a radio •...
  • Page 74 "BLUETOOTH". You cannot select different stations of AM/FM broadcasts for the main room and separate room. Onkyo Controller is useful for the multi-zone playback operation. Download Onkyo Controller (available on iOS or Android™) to a mobile device, such as a smartphone and tablet to use it.
  • Page 75 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Playing Back In the remote controller operation, while pressing and holding the ZONE 2 SHIFT button on the remote controller, operate with each button. 1. Point the remote controller at the unit, and while pressing and holding the ZONE 2 SHIFT button on the remote controller, press .
  • Page 76 Contents Connections Playback Setup ≫ ≫ ≫ ≫ • DSD audio signals cannot be output to ZONE 2 when selected with the "NET" input selector. • If ZONE 2 is on, power consumption during standby will increase. • If ZONE 2 is turned on when the Pure Audio listening mode is selected in the main room, the mode will automatically switch to the Direct listening mode.
  • Page 77 Contents Connections Playback Setup ≫ ≫ ≫ ≫ ZONE B Playback While performing playback through speakers (ZONE A) connected to the unit, you can enjoy the audio of the same source with the pre-main amplifier (ZONE B) connected to the ZONE B LINE OUT jack at the same time. Playing Back 1.
  • Page 78 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Convenience functions Adjusting the tone Adjusting TREBLE/BASS You can adjust the sound quality of the front speakers. 1. Press TREBLE or BASS to select the setting to adjust. TREBLE: Enhances or moderates the high-tone range of the front speakers. BASS: Enhances or moderates the low-tone range of the front speakers.
  • Page 79 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Sleep Timer You can allow the unit to enter standby automatically when the specified time has elapsed. Press SLEEP button on the remote controller to select the time from "30 min", "60 min"...
  • Page 80 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Listening Mode This unit is equipped with a variety of listening modes, and you can select the optimum listening mode for movies, TV, music, and games by pressing MOVIE/TV, MUSIC, and GAME. Selecting a Listening mode 1.
  • Page 81 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Checking the input format and listening mode Pressing button on the remote controller or INFO button on the main unit repeatedly will switch the display of the main unit in the following order. •...
  • Page 82 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Speaker Layouts and Selectable Listening Modes See the following table for selectable listening modes for each speaker layout. Speaker layout Listening mode 2.1 ch 3.1 ch 4.1 ch 5.1 ch 6.1 ch 7.1 ch 2.1.2 ch 3.1.2 ch...
  • Page 83 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Speaker layout Listening mode 2.1 ch 3.1 ch 4.1 ch 5.1 ch 6.1 ch 7.1 ch 2.1.2 ch 3.1.2 ch 4.1.2 ch 5.1.2 ch (*3) (*3) (*3) ES Discrete (DTS-ES Discrete) ES Matrix (DTS-ES Matrix) DTS 96/24 (*3) (*3)
  • Page 84 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Speaker layout Listening mode 2.1 ch 3.1 ch 4.1 ch 5.1 ch 6.1 ch 7.1 ch 2.1.2 ch 3.1.2 ch 4.1.2 ch 5.1.2 ch Multich (Multichannel) (*1) (*1) (*1) (*1) (*1) (*3) (*3) (*3) (*1)
  • Page 85 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Listening Mode Effects Updating of listening modes Atmos „ Listening modes such as DTS Virtual:X, Atoms 2.0 and DSur 2.0 are (Firmware version supporting Atmos 2.0, etc.) added when the firmware is updated after purchase or the firmware is switched Since this mode calculates the positional data of audio recorded in Dolby Atmos in the product production process.
  • Page 86 Contents Connections Playback Setup ≫ ≫ ≫ ≫ DD (Dolby Audio - DD) surround channel or height channel is virtually created for expansion playback. „ • This mode cannot be selected when DTS signal is input. This mode faithfully reproduces the sound design recorded in the Dolby Digital According to the speaker layout, the following listening modes are displayed.
  • Page 87 Contents Connections Playback Setup ≫ ≫ ≫ ≫ „ DTS-HD HR (DTS-HD High Resolution) by setting the output on the player side to the PCM output. • This listening mode cannot be selected if the output setting on your Blu-ray This mode faithfully reproduces the sound design recorded in the DTS-HD High Disc/DVD player is not set to DSD.
  • Page 88 Contents Connections Playback Setup ≫ ≫ ≫ ≫ „ Game-Action are connected. • This mode cannot be selected when "Speaker Virtualizer" ( p112) is set to This mode is suitable for games with a lot of action. "Off" (Default: On). „...
  • Page 89 Contents Connections Playback Setup ≫ ≫ ≫ ≫ „ Stereo In this mode, sound is output from the right and left front speakers and subwoofer. „ Studio-Mix This mode is suitable for rock or pop music. This mode creates a lively sound field with a powerful acoustic image as if you are at a club or rock concert.
  • Page 90 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Input Formats and Selectable Listening Modes „ MOVIE/TV button You can select a variety of listening modes Input Format Listening Mode according to the audio format of the signal to be Multich PCM Direct input.
  • Page 91 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Input Format Listening Mode Input Format Listening Mode Input Format Listening Mode Direct Direct DTHD Direct DTHD *1 *2 *1 *2 *1 *2 DSur DSur DSur DTS Neural:X TV Logic TV Logic DTS Virtual:X AllCh Stereo AllCh Stereo...
  • Page 92 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Input Format Listening Mode Input Format Listening Mode Input Format Listening Mode DTS 96/24 Direct DTS-HD HR Direct DTS-ES Direct DTS 96/24 DTS-HD HR *1 *2 *1 *2 DTS Neural:X DTS Neural:X ES Matrix DTS Virtual:X DTS Virtual:X...
  • Page 93 Contents Connections Playback Setup ≫ ≫ ≫ ≫ „ MUSIC button Input Format Listening Mode Input Format Listening Mode Pure Audio Multich PCM Pure Audio Input Format Listening Mode Music files (except DSD/ Direct Direct Analog Pure Audio Dolby TrueHD) Stereo Stereo Direct...
  • Page 94 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Input Format Listening Mode Input Format Listening Mode Input Format Listening Mode Pure Audio Pure Audio DTHD Pure Audio Direct Direct Direct Stereo Stereo Stereo DTHD *1 *2 *1 *2 *1 *2 DSur DSur DSur...
  • Page 95 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Input Format Listening Mode Input Format Listening Mode Input Format Listening Mode Pure Audio DTS 96/24 Pure Audio DTS Express Pure Audio Direct Direct Direct Stereo Stereo Stereo DTS 96/24 DTS Express *1 *2 *1 *2 *1 *2...
  • Page 96 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Input Format Listening Mode Input Format Listening Mode Input Format Listening Mode DTS-HD HR Pure Audio DTS-HD MSTR Pure Audio DTS-ES Pure Audio Direct Direct Direct Stereo Stereo Stereo DTS-HD HR DTS-HD MSTR *1 *2 *1 *2 DTS Neural:X...
  • Page 97 Contents Connections Playback Setup ≫ ≫ ≫ ≫ „ GAME button Input Format Listening Mode Input Format Listening Mode DTS:X Pure Audio Direct Input Format Listening Mode Music files (except DSD/ Direct DSur Analog Direct Dolby TrueHD) Stereo DTS Neural:X DSur DTS:X DTS Virtual:X...
  • Page 98 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Input Format Listening Mode Input Format Listening Mode Input Format Listening Mode Multich PCM Direct Direct Direct Multich *1 *2 *1 *2 DSur DSur DSur DTS Neural:X DTS Neural:X Game-RPG DTS Virtual:X DTS Virtual:X Game-Action *2 *3...
  • Page 99 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Input Format Listening Mode Input Format Listening Mode Input Format Listening Mode Direct Direct DTS 96/24 Direct DTS 96/24 *1 *2 *3 *1 *2 *1 *2 DSur DTS Neural:X DTS Neural:X Game-RPG DTS Virtual:X DTS Virtual:X *4 *5...
  • Page 100 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Input Format Listening Mode Input Format Listening Mode Input Format Listening Mode DTS Express Direct DTS-HD HR Direct DTS-HD MSTR Direct DTS Express DTS-HD HR DTS-HD MSTR *1 *2 *1 *2 *1 *2 DTS Neural:X DTS Neural:X DTS Neural:X...
  • Page 101 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Input Format Listening Mode Input Format Listening Mode DTS-ES Direct DTS:X Direct DTS:X ES Matrix DTS Virtual:X *1 *2 ES Discrete Game-RPG DTS Neural:X Game-Action DTS Virtual:X Game-Rock *3 *4 Game-RPG Game-Sports Game-Action AllCh Stereo Game-Rock...
  • Page 102 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Setup Menu Menu list You can configure advanced settings to have a more enjoyable experience with this unit. For operation details, refer to "Menu operations". ( p104) 1. Input/Output 1. TV Out / OSD Make settings for TV output and On-Screen Displays (OSD) that appear on the TV.
  • Page 103 Contents Connections Playback Setup ≫ ≫ ≫ ≫ 4. Source 1. IntelliVolume Adjust the volume level when there are differences in volume level among multiple devices p114 connected to this unit. 2. Name Edit Set an easy name for each input. p114 Audio Select Select the priority for input selection when multiple audio sources are connected to one input...
  • Page 104 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Menu operations Use the on-screen displays (OSD) that appear on the TV to make the settings. Press on the remote controller to display the Setup menu. Setup 1. Input/Output Assign 1. TV Out / OSD 2.
  • Page 105 Contents Connections Playback Setup ≫ ≫ ≫ ≫ 1. Input/Output Assign Setting Item Default Value Setting Details Super Resolution When you have set "1080p -> 4K Upscaling" to „ 1. TV Out / OSD "Auto", you can select the degree of video signal correction from "Off"...
  • Page 106 Contents Connections Playback Setup ≫ ≫ ≫ ≫ „ 2. HDMI Input Setting Item Default Value Setting Details Mini Player OSD Always On You can display on the TV the images from another Change input assignment between the input selectors and HDMI IN jacks. input selected last while playing the audio from NET or BLUETOOTH input.
  • Page 107 Contents Connections Playback Setup ≫ ≫ ≫ ≫ „ 3. Digital Audio Input Setting Item Default Value Setting Details "HDMI 1 (HDCP 2.2)" to "HDMI 6 (HDCP 2.2)": Change input assignment between the input selectors and DIGITAL IN COAXIAL/ Assign a desired HDMI IN jack to the TV button. If OPTICAL jacks.
  • Page 108 Contents Connections Playback Setup ≫ ≫ ≫ ≫ 2. Speaker „ 4. Analog Audio Input Change input assignment between the input selectors and AUDIO IN jacks. If you „ 1. Configuration do not assign a jack, select "---". Change the settings of connection environment of the speakers. Setting Item Default Value Setting Details...
  • Page 109 Contents Connections Playback Setup ≫ ≫ ≫ ≫ „ 2. Crossover Setting Item Default Value Setting Details Bi-Amp Set whether the front speakers are bi-amp Change the settings of crossover frequencies. connected. "No": When front speakers are not bi-amp Setting Item Default Value Setting Details connected...
  • Page 110 Contents Connections Playback Setup ≫ ≫ ≫ ≫ „ 3. Distance Setting Item Default Value Setting Details Surround 100 Hz Select the crossover frequency from "40 Hz" to Set the distance from each speaker to the listening position. "200 Hz" to start outputting frequencies for each channel.
  • Page 111 Contents Connections Playback Setup ≫ ≫ ≫ ≫ • The unit of distance can be changed by pressing the MODE button on the remote Setting Item Default Value Setting Details controller. When using the unit "feet", the setting is available in increments of 0.1 ft from Surr Back Left 0 dB Select a value between "-12 dB"...
  • Page 112 Contents Connections Playback Setup ≫ ≫ ≫ ≫ „ 6. Equalizer Settings Setting Item Default Value Setting Details Subwoofer 0.0 dB After selecting the speaker frequency between You can adjust the output volume of the range for each connected speaker. "25 Hz"...
  • Page 113 Contents Connections Playback Setup ≫ ≫ ≫ ≫ 3. Audio Adjust „ 3. DTS Change the setting of when DTS signals are input. „ 1. Multiplex/Mono Setting Item Default Value Setting Details Change the settings of multiplex audio playback. DTS Auto When inputting DTS signals that include extended Surround channel information, the optimum listening mode is...
  • Page 114 Contents Connections Playback Setup ≫ ≫ ≫ ≫ 4. Source „ 5. Volume Change the Volume settings. „ 1. IntelliVolume Setting Item Default Value Setting Details Adjust the volume level when there are differences in volume level among multiple Mute Level -∞...
  • Page 115 Contents Connections Playback Setup ≫ ≫ ≫ ≫ • To name a preset radio station, press TUNER on the remote controller, select AM/FM, Setting Item Default Value Setting Details and select the preset number. PCM Fixed Mode Select whether to fix input signals to PCM (except •...
  • Page 116 • When this function is set to "On", the power can switch the input of the unit using the remote consumption in standby state increases, controller or the Onkyo Controller app even in the however, the increase in power consumption is standby mode.
  • Page 117 Contents Connections Playback Setup ≫ ≫ ≫ ≫ „ 2. Network Setting Item Default Value Setting Details Audio TV Out You can enjoy audio through the speakers of the Change the settings of the Network function. TV while this unit is on. •...
  • Page 118 1. Press ENTER to display the Edit screen. Friendly Name Onkyo Change the model name of this unit which is 2. Select a character or symbol with the cursors, TX-NR595 displayed on the device connected to the network and press ENTER. XXXXXX to an easily recognized name.
  • Page 119 Contents Connections Playback Setup ≫ ≫ ≫ ≫ „ 3. Bluetooth Setting Item Default Value Setting Details Pairing You can initialize the pairing information stored on Change the settings for the Bluetooth function. Information this unit. Pressing ENTER when "Clear" is displayed Setting Item Default Value Setting Details...
  • Page 120 (When "USB Power Out turn on the power of the unit via network using at Standby" or "Network Standby" is enabled, the an application such as Onkyo Controller that can unit enters the HYBRID STANDBY mode which control this unit.
  • Page 121 Contents Connections Playback Setup ≫ ≫ ≫ ≫ „ 5. Works with SONOS Setting Item Default Value Setting Details Preset Volume Main: You can set the volume beforehand for playing Change the settings to connect with the Sonos Connect. Last back the Sonos Connect.
  • Page 122 Zone or when using the Music Server function to play Remote ID If multiple ONKYO products are installed in the remotely from your PC, you can set whether to play same room, select the ID for the remote control in the main room (where this unit is located) or in a used with this unit from "1", "2"...
  • Page 123 Contents Connections Playback Setup ≫ ≫ ≫ ≫ „ 3. Firmware Update „ 6. Factory Reset Change the settings for Firmware Update. All the settings are restored to factory defaults. Setting Item Default Value Setting Details Setting Item Default Value Setting Details Update Notice Enable...
  • Page 124 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Quick Menu Menu operations You can quickly adjust the settings you frequently use, such as tone adjustments, etc. You can make the settings on the TV screen during playback. Press Q on the remote controller to display the Quick Menu.
  • Page 125 Contents Connections Playback Setup ≫ ≫ ≫ ≫ • If you set the unit to the standby mode, the adjustments you made will be Center Spread: Adjust the width of the sound field of the front channel when restored to the previous statuses. playing in the Dolby Audio - DSur listening mode.
  • Page 126 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Web Setup Menu operations You can make the settings for the network function of this unit using an Internet Network Connection: You can select a network connection method. If you select browser on a PC, smartphone, etc. "Wireless", select an access point from "Wi-Fi Setup"...
  • Page 127 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Initial Setup with Auto Start-up Wizard Operations When you turn the unit on for the first time after purchase, the Initial Setup screen is automatically displayed on the TV to allow you to make settings required for TV’s REMOTE startup using simple operations following on-screen guidance.
  • Page 128 Contents Connections Playback Setup ≫ ≫ ≫ ≫ 1. Place the supplied speaker setup microphone at the listening position, and • To perform the Initial Setup again after the setting is completed, press connect it to the SETUP MIC jack on the main unit. select "7.
  • Page 129 Contents Connections Playback Setup ≫ ≫ ≫ ≫ "Scan Networks": Search for an access point from this unit. Find out the SSID of the access point beforehand. "Use iOS Device (iOS7 or later)": Share the Wi-Fi settings of your iOS device with this unit.
  • Page 130 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Troubleshooting „ Tuner „ BLUETOOTH function Before starting the procedure „ Network function Problems may be solved by simply turning the power on/off or disconnecting/ „ USB storage device connecting the power cord, which is easier than working on the connection, setting and operating procedure.

  • Page 131: When The Unit Is Operating Erratically

    Contents Connections Playback Setup ≫ ≫ ≫ ≫ When the unit is operating erratically ❏ Try restarting the unit Restarting this unit may solve the problem. After turning the unit to standby mode, press and hold the ON/STANDBY button of the main unit for at least 5 seconds, and then restart the unit.

  • Page 132: Resetting The Unit

    Contents Connections Playback Setup ≫ ≫ ≫ ≫ ❏ Resetting the unit (this resets the unit settings to the default) If the restart of the unit does not solve the problem, reset the unit, and restore all the settings to the factory default at the time of purchase. This may solve the problem. If the unit is reset, your settings are restored to the default values.

  • Page 133: Troubleshooting

    Contents Connections Playback Setup ≫ ≫ ≫ ≫ Troubleshooting „ Power ❏ When the power is turned on, "AMP Diag Mode" appears on the display of the main unit. • The protection circuit function may have operated. If the unit suddenly enters the standby state and "AMP Diag Mode" appears on the display of the main unit when the power is turned on again, this function is diagnosing whether or not the main unit is malfunctioning or there is an abnormality with the speaker cable connection.
  • Page 134 Contents Connections Playback Setup ≫ ≫ ≫ ≫ ❏ No sound from a connected player • Change the input selector on this unit to the position of the terminal to which the player is connected. • Check the digital audio output setting on the connected device. On some game consoles, such as those supporting DVD, the default setting may be off.

  • Page 135: X84; Listening Modes

    Contents Connections Playback Setup ≫ ≫ ≫ ≫ ❏ Sound suddenly reduces • When using the unit for extended periods with the temperature inside the unit exceeding a certain temperature, the volume may be reduced automatically to protect the circuits. ❏...

  • Page 136: X84; Video

    Contents Connections Playback Setup ≫ ≫ ≫ ≫ „ Video • Confirm that the connection between the output jack on the connected device and the input jack on this unit is correct. • Make sure that none of the connecting cables are bent, twisted, or damaged. •...

  • Page 137: X84; Tuner

    Contents Connections Playback Setup ≫ ≫ ≫ ≫ „ Tuner ❏ Poor reception or much noise • Recheck the antenna connection. p44) • Move the antenna away from the speaker cord or power cord. • Move the unit away from your TV or PC. •...

  • Page 138: X84; Network Function

    Contents Connections Playback Setup ≫ ≫ ≫ ≫ „ Network function • If you cannot select a network service, start up the network function to select it. It may take approx. one minute to start it up. • When the NET indicator is blinking, this unit is not properly connected to the home network. •...

  • Page 139: X84; Usb Storage Device

    Contents Connections Playback Setup ≫ ≫ ≫ ≫ „ USB storage device ❏ USB storage device is not displayed • Check if the USB storage device or USB cable is securely inserted to the USB port of the unit. p56) •...

  • Page 140: X84; Zone B Function

    Contents Connections Playback Setup ≫ ≫ ≫ ≫ ❏ Playback sound is interrupted, or communication is not possible • You may not receive radio waves due to poor radio wave conditions. Shorten the distance from the wireless LAN router, or remove obstacles to improve visibility, and connect again.

  • Page 141: X84; Display

    Contents Connections Playback Setup ≫ ≫ ≫ ≫ „ Display ❏ The display does not light up • When the Dimmer function is working, the display may go dim. Press the DIMMER button, and change the brightness level of the display. p16) •...
  • Page 142 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Reducing the Power Consumption in Standby State When the following functions are enabled, the power consumption in standby state increases. To reduce the power consumption in standby state, check each setting and set the functions to "Off". –...
  • Page 143 HDCP standards. Operation has been confirmed on the following devices: (As of January 2019) Toshiba brand televisions; Sharp brand televisions; Onkyo and Integra brand RIHD-compatible players; Toshiba brand players and recorders; Sharp brand players and recorders (when used with a Sharp brand television)
  • Page 144 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Supported Audio Formats 2 ch linear PCM: 32 kHz, 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz, 192 kHz, 16/20/24 bit Multi-channel linear PCM: Maximum 7.1 channels, 32 kHz, 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz, 192 kHz, 16/20/24 bit Bitstream: Dolby Atmos, Dolby Digital, Dolby Digital Plus, Dolby TrueHD, DTS, DTS:X, DTS-...
  • Page 145 Contents Connections Playback Setup ≫ ≫ ≫ ≫ General Specifications „ Amplifier Section Signal to Noise Ratio 106 dB (IHF-A, LINE IN, SP OUT) Rated Output Power (FTC) (North American) 80 dB (IHF-A, PHONO IN, SP OUT) With 8 ohm loads, both channels driven, from 20-20,000 Hz; rated 80 watts Speaker Impedance per channel minimum RMS power, with no more than 0.08% total harmonic 4 Ω...
  • Page 146 Contents Connections Playback Setup ≫ ≫ ≫ ≫ „ BLUETOOTH Section 2.1 W (Standby mode (ALL ON)) (North American) 2.3 W (Standby mode (ALL ON)) (Others) Communication system 55 W (No-sound) BLUETOOTH Specification version 4.1+LE 6 W (HDMI Standby Through) (North American) Frequency band 6.1 W (HDMI Standby Through) (Others) 2.4 GHz band...
  • Page 147 Contents Connections Playback Setup ≫ ≫ ≫ ≫ „ Audio Inputs Digital OPTICAL (TV) COAXIAL (BD/DVD) Analog BD/DVD, CBL/SAT, STRM BOX, CD, PHONO, AUX (front) „ Audio Outputs Analog ZONE B LINE OUT 2 SUBWOOFER PRE OUT Speaker Outputs (North American) FRONT L/R, CENTER, SURROUND L/R, HEIGHT L/R or SURROUND BACK L/R, ZONE 2 FRONT L/R (Banana plug ready) Speaker Outputs (Others)
  • Page 148 SN 29403642_EN (C) Copyright 2019 Onkyo & Pioneer Corporation Japan. All rights reserved. http://www.onkyo.com/privacy/ H1902-0...

Table of Contents