Table of Contents
Advertisement
User's Guide
Messages
Connection to SMTP server failed.
Change Secure Connection to SSL/TLS.
Connection to SMTP server failed.
Change Secure Connection to
STARTTLS.
The connection is untrusted. Check the
following. - Date and Time
The connection is untrusted. Check the
following. - CA Certificate
The connection is not secured.
SMTP server authentication failed.
Change Authentication Method to
SMTP-AUTH.
SMTP server authentication failed.
Change Authentication Method to
POP before SMTP.
Sender's Email Address is incorrect.
Change to the email address for your
email service.
Cannot access the printer until
processing is complete.
Related Information
"Checking an Email Server Connection" on page 220
&
Where to Get Help
Technical Support Web Site
If you need further help, visit the Epson support website shown below. Select your country or region and go to the
support section of your local Epson website. The latest drivers, FAQs, manuals, or other downloadables are also
available from the site.
http://support.epson.net/
http://www.epson.eu/Support
If your Epson product is not operating properly and you cannot solve the problem, contact Epson support services
for assistance.
Appendix
This message appears when an SMTP mismatch occurs between a server and a
client, or when the server requests to use an SSL/TLS connection for an SMTP
secure connection.
This message appears when an SMTP mismatch occurs between a server and a
client, or when the server requests to use an STARTTLS connection for an SMTP
secure connection.
This message appears when the printer's date and time setting is incorrect or the
certificate has expired.
This message appears when the printer does not have a root certificate
corresponding to the server or a CA Certificate has not been imported.
This message appears when the obtained certificate is damaged.
This message appears when an authentication method mismatch occurs between
a server and a client. The server supports SMTP AUTH.
This message appears when an authentication method mismatch occurs between
a server and a client. The server does not support SMTP AUTH.
This message appears when the specified sender's Email address is wrong.
This message appears when the printer is busy.
(Europe)
222
Explanation
Advertisement
Table of Contents
