Table of Contents
Advertisement
[Device List]
Show the device list.
5. Energy Options
Home mode is intended for
home use, and will save much
energy. In this mode, the display
automatically switches to Auto
Power save mode and then Auto
Standby mode when no external
signal is input.
Retail mode is a relatively more
energy consuming mode. In
this mode, the display does not
switch to Auto Power save mode
or Auto Standby mode when no
external signal is input.
Office mode is between Home
mode and Retail mode. In this
mode, the display automatically
switches to Auto Power save
mode but will not continue to
switch to Auto Standby mode
when no external signal is input.
6. Auto Power Down
Select On to enable your display
to turn off automatically when
you do not press any buttons in
4 hours.
7.
RGB Options
(Only available for VGA input,
and when there is VGA signal
input)
[Auto Adjust]
Automatically adjust the image
settings such as position.
[H. Position]
Adjust horizontal position.
[V. Position]
Adjust vertical position.
[Clock]
Set to the minimum level if noise
occurs.
[Phase]
Eliminate flicker and distortion.
[Reset RGB Options]
Reset RGB options to factory
default settings.
8. Monitor ID
Set the monitor ID number from
1─100, All, or Group A─J.
9.
Time Schedule
This function enables your
display to turn on and off
automatically.
[Schedule Status]
Select On to enable Time
Schedule.
[Current Time]
Set the current time before using
this function.
[Power On]
Set the time for your display to
turn on.
[Power Off]
Set the time for your display to
turn off.
10. Sleep Timer
Select how long the display will
take to automatically turn intself
off. Off / 5 / 10 / 15 / 30 / 60 / 90
/ 120 / 180 / 240 (minutes)
11. No Signal Menu
Select how long the No Signal
message will display. Off /
10 seconds / 30 seconds /
1 minutes / 5 minutes / 10
minutes / 15 minutes
12. IR Lock Setting
Select On to lock your remote
control, and the remote control
will disable to control the display.
Press Display button for 5
seconds can unlock it.
13. System Info
Indicate the display information.
14. Reset AV & Setup
Reset all Audio, Video, and
Setup settings to factory default
settings.
English-26
Advertisement
Table of Contents
