Mount the GPS receiver as close to horizontal as possible. Allow time for the GPS to acquire a satellite fix. When you turn the Rallye MAX-G™ on, the LCD display will flash while the GPS receiver is acquiring a satellite fix. Once the display stops flashing, you may begin your ride.
Page 3
AutoCal™ Automatic Calibration When following routes which have been accurately laid out using a GPS or calibrated odometer, your Rallye MAX-G™ will closely match the route distance without adjustment. Some routes may have been created using less accurate methods. Therefore, we have included the ICO Racing™...
Page 4
After 2 hours of no button activity or no movement, the instrument will automatically sleep. NOTE: AutoCal™ and Max Speed will not reset on sleep. The Rallye MAX-G™ assumes you are still on the same stage/day/ride. NOTE: Upon turn on after an automatic sleep, the previous distance will be displayed.
Page 5
Select Units (Kilometers or Miles) KM MI Press the down button to accept the current value. Show CAP Mode Press the down button to accept the current value. Show Speed Mode SPEED Press the down button to accept the current value. Show Clock Mode Press the down button to accept...
Page 6
AutoCal™ Enabled Thumbswitch Flip / Reverse (In Prefs Menu) Normally, the remote thumbswitch is mounted on the left side (clutch side) of the motorcycle. For mounting on the right side (throttle side) or in other applications, you can flip, or reverse, the up and down buttons. Trip Distance Reset Trip Distance Lifetime Distance...
Page 7
Time Zone Setting The Rallye MAX-G uses GPS time, adjusted to your local time zone. Set the time zone from the Clock display. Press and hold a bottom button until the display flashes. Then bump a top button until the time matches the local time.
Race Mode Selecting Precision 2 decimal places 1 decimal place Adjustable Brightness Dim (night) Bright (day)
Page 9
Race Mode Summary Distance Reset Distance CAP Heading Speed Max Speed Reset Max Speed SPEED MAX SPEED MAX SPEED GPS Clock...
Page 10
You simply adjust to the exact mileage on the roadbook without worrying about how far past the marker you may have ridden since starting the adjustment. The Rallye MAX-G™ will add the rolling distance when you finish your adjustment.
Factory Reset The settings you select in the Edit mode are maintained even when there is no power. If you want to restore the factory defaults, you may perform a Factory Reset. All user settings and odometers, except the full odometer, are reset. Hold the thumb switch mode button while powering up the instrument.
Page 12
Quick Reference and Defaults Distance AUTO Units (km/miles) CAP Heading Show Cap SPEED Show Speed Show Clock AUTO AUTO Enable AutoCal™ Flip Thumbswitch Trip distance Full distance Hour meter Speed Max Speed Reset Max SPEED MAX SPEED MAX SPEED Clock...
Need help?
Do you have a question about the Rallye MAX-G and is the answer not in the manual?
Questions and answers