Related Manuals for Motorola STARTAC S12
Summary of Contents for Motorola STARTAC S12
- Page 1 Corded Telephone with Digital Cordless Handset Motorola S12 For S1201, S1202, S1203 and S1204 Warning: Charge the handset for 24 hours before use.
- Page 2 Welcome... to your new Motorola S12 Digital Cordless Telephone! • All handsets are fully cordless for locating anywhere within range. • 50 Name and Number phonebook. • Speakerphone for hands-free conversation. • Caller ID shows you who’s calling and see details of the last 40 callers in a Calls list.
- Page 3 This User Guide provides you with all the information you need to get the most from your phone. Before you make your first call you will need to set up your phone. Follow the simple instructions in ‘Getting Started’, on the next few pages. IMPORTANT Only use the telephone line cord supplied.
-
Page 4: Table Of Contents
1. Getting started ..............6 2. Getting to know your phone ..........10 Switch the handset on / off ................15 Calls .......................15 3.2.1 Make a call ...................15 3.2.2 Preparatory dialling ................15 3.2.3 End a call .....................15 3.2.4 Receive a call ..................15 Adjust the earpiece volume................15 Secrecy ......................15 Intercom......................16 3.5.1... - Page 5 6. Base settings ...............24 Base ringer volume ..................24 Base ringer melody ..................24 Change base PIN code .................24 Dial mode.......................24 Recall mode ....................25 Restore default settings .................25 Emergency default ..................25 Eco mode ......................25 Default settings .....................26 7. Clock & alarm ..............27 Set the date ....................27 Set the time ....................27 Set alarm ......................27...
-
Page 6: Getting Started
1. Getting started IMPORTANT Do not place your S12 in the bathroom or other humid areas. Location You need to place your S12 base within 2 metres of the mains power and telephone wall sockets so that the cables will reach. The socket-outlet should be installed near the equipment and should be easily accessible. - Page 7 Connecting the base 1. Plug the telephone line cord into the socket marked on the rear of the base. 2. Plug the power adaptor into the socket marked on the rear of the base and plug the other end into the mains power wall socket. Switch on the mains power. Installing and charging the handset 1.
- Page 8 2. Clip the battery cover back into place. 3. If you are charging the batteries for the first time, place the handset on the base to charge for at least 24 hours continuously. 4. When the handset is fully charged, icon will appear steady on the display.
- Page 9 BATTERY LOW WARNING If the icon flashes on the display and you hear a warning beep every minute during a call, you will need to recharge the handset before you can use it again. When charging, the icon will scroll on the display. Once fully charged scrolling will stop.
-
Page 10: Getting To Know Your Phone
2. Getting to know your phone Overview of your handset Getting to know your phone... - Page 11 A Earpiece B Display See page 12 for an overview of the display icons. C Up During a call, press to increase earpiece volume, page 15. When the phone is ringing, press to increase the handset ringer volume, page 21. Press to scroll through the menu options, redial list, calls list and phonebook entries.
- Page 12 Handset LCD Display Battery Eco mode status Circle around Scrolls appears when when Eco mode is ON charging Time or Handset name In standby mode, press and hold to switch handset idle screen between handset name or time. Flashes to indicate an incoming external call. External call in progress.
- Page 13 Flashes when battery is almost fully discharged. For this feature to work, you must subscribe to Caller ID Service from your network operator. A subscription fee may be payable. Overview of the base A Page In standby mode, press to ring the handset(s), page 18. Press and hold to enter registration mode when registering handsets, page 30.
- Page 14 Menu map PHONEBOOK INT RING VOL ADD ENTRY EXT RING VOL MODIFY ENTRY INT MELODY DELETE ENTRY EXT MELODY SETUP AUTO ANSWER BASE VOLUME NAME BASE MELODY LANGUAGE DEL HANDSET KEYLOCK ? PIN CODE DATE - TIME DIAL MODE DATE SET RECALL CLOCK SET DEFAULT...
-
Page 15: Switch The Handset On / Off
3. Using the phone NOTE Your handset will automatically time the duration of all external calls. The call timer will display after the first 15 seconds of your call. When the call ends, the total duration of your talk time flashes on the screen for 5 seconds. Switch the handset on / off Press and hold to switch the handset on or off. -
Page 16: Intercom
Intercom 3.5.1 Make an internal call If you have more than one handset registered to the base, you can make internal calls between two handsets. icon is displayed to indicate an internal call. 1. Press followed by the number (1-5) of the handset you want to call. 3.5.2 Receive an internal call When you receive an internal call,... -
Page 17: Answer A Call Hands-Free
NOTE During a hands-free call, press to adjust the volume. 3.6.2 Answer a call hands-free < If the handset is on the base and auto answer is switched on, lift the handset and press < If the handset is off the base or auto answer is switched off, press twice to answer the call. -
Page 18: Delete The Entire Redial List
3.7.4 Delete the entire Redial list 1. Press to open the Redial list. 2. Press and hold . The display shows DELETE ALL 3. Press to confirm or to cancel. Lock / unlock the keypad You can lock the keypad so that it cannot be operated accidentally while carrying it around. -
Page 19: Phonebook
4. Phonebook You can store up to 50 names and numbers in the phonebook. Names can be up to 12 characters long and numbers up to 24 digits. You can also select different ringer melodies for the phonebook entries. Store a name and number If you have subscribed to Caller ID Service and wish to display the name of your caller instead of the number, save the full telephone number including the area code to your phonebook. -
Page 20: Edit A Name And Number
Scroll to the entry you want. < 3. Press to dial or to return to standby. NOTE When the name is displayed, you can switch between the name and number by pressing Edit a name and number 1. Press , the display show PHONEBOOK, press 2. -
Page 21: Handset Settings
5. Handset settings Handset ringer volume You can adjust the ringer volume and set different volume levels for your internal and external calls. Choose from 5 volume levels or Off. 1. Press , scroll HANDSET and press 2. Press to select INT RING VOL EXT RING VOL and press... -
Page 22: Handset Name
Handset name If you are using more than one handset with your S12 base, you can set a personalized name for each handset to easily distinguish between them. A name can be up to 10 characters long. 1. Press , scroll HANDSET and press 2. -
Page 23: Out Of Range Warning Beep
Out of range warning beep If the handset goes out of range, you will hear warning beeps during a call. You can switch these beeps on or off. 1. Press , scroll HANDSET and press . The display shows BEEP. 2. -
Page 24: Base Settings
6. Base settings Base ringer volume Choose from 5 volume levels or Off. 1. Press , scroll SETUP and press . The display shows BASE VOLUME. 2. Press 3. Press to select the volume (1 - 5 or OFF). 4. Press to confirm or to return to the previous menu. -
Page 25: Recall Mode
Recall mode Depending on your country and network operator, your S12 has the recall time set as 600 (TIMED BR, 2). It is unlikely that you need to change this setting unless advised to do so. 1. Press , scroll SETUP and press 2. -
Page 26: Default Settings
Eco mode NOTE When ECO mode is set to ON, the handset range will be reduced. On the handset display when ECO mode is switch off the circle around the disappears. Default settings Low battery beeps Out of range warning beeps Key beep Auto answer Internal melody... -
Page 27: Clock & Alarm
7. Clock & alarm If you have subscribed to Caller ID Service, the date and time will be set on all your handsets whenever a call is received. You can also manually set the date and time on the individual handsets. Set the date 1. -
Page 28: Caller Id And The Calls List
8. Caller ID and the Calls list IMPORTANT To use Caller ID, you must first subscribe to the service from your network provider. A subscription fee may be payable. To ensure that the caller’s name is displayed, make sure you have stored the full telephone number, including the area code in the phonebook. -
Page 29: Dial A Number In The Calls List
• If the telephone number is longer than 12 digits, icon is displayed. Press see the remaining digits. • Press again to see the time and date of the call. • Press again to access the option to store the entry in your phonebook. 8.2.2 Dial a number in the Calls list 1. -
Page 30: Using Additional Handsets
9. Using additional handsets You can register up to five handsets to your S12 base to extend your phone system without having to install extension sockets for each new phone. Each S12 handset can be registered with up to four bases. You can then select the base you prefer to use. -
Page 31: Register A Different Make Of Handset To Your S12 Base
Register a different make of handset to your S12 base IMPORTANT DECT GAP Profile only guarantees that basic calling functions will work correctly between different makes / types of handset and base. There is a possibility that certain features such as Caller ID will not work correctly. On the base: 1. -
Page 32: Help
10. Help No dial tone • Use only the telephone line cord supplied. • Check that the telephone line cord is connected properly. • Check that the mains power is connected properly and switched on. No display • Check that the batteries are inserted correctly and fully charged. Use only approved rechargeable batteries supplied. - Page 33 Handset does not ring • The handset ringer volume may be set to Off, see page 21. Base unit does not ring • The base ringer volume may be set to Off, see page 24. Noise interference on my phone or on other electrical equipment nearby •...
-
Page 34: General Information
11. General information IMPORTANT This equipment is not designed to make emergency telephone calls when the power fails. Alternative arrangements should be made for access to emergency services. This product is intended for connection to analogue public switched telephone networks and private switchboards in Singapore. - Page 35 Installation Guidelines • Read and understand all instructions and save them for future reference. • Follow all warnings and instructions marked on the product. • Do not install this product near a bath tub, sink, or shower. • Operate this phone using only the power source that is indicated on the marking label. If you are unsure of the power supply to your home, consult with your dealer or local power company.
- Page 36 (“SUNCORP”) What Does this Warranty Cover? Subject to the exclusions contained below, SUNCORP warrants that this Motorola branded product (“Product”) or certified accessory (“Accessory”) sold for use with this product that it manufactured to be free from defects in materials and workmanship under normal consumer usage for the period outlined below.
- Page 37 WARRANTY IS THE EXCLUSIVE REMEDY OF THE CONSUMER, AND IS PROVIDED IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OF IMPLIED. IN NO EVENT SHALL MOTOROLA OR SUNCORP BE LIABLE, WHETHER IN CONTRACT OR TORT (INCLUDING NEGLIGENCE) FOR DAMAGES IN EXCESS OF THE PURCHASE...
- Page 38 Use of Non-Motorola branded Products and Accessories. Defects or damage that result from the use of Non-Motorola branded or certified Products or Accessories or other peripheral equipment are excluded from coverage. Unauthorized Service or Modification. Defects or damages resulting from service,...
- Page 39 Declaration of Conformity (DoC) Suncorp declares that the following products: Brandname: Motorola Type: S1201, S1202, S1203 and S1204 Descriptions: DECT phone without telephone answering machine (S120x) and their multi-handset versions. to which this declaration related is in conformity with the essential requirements of the following directives of the Council of the European Communities: R&TTE Directive (1999/5/EC)
- Page 40 Manufactured, distributed or sold by Suncorp Technologies Ltd., official licensee for this product. MOTOROLA and the Stylized M Logo are trademarks or registered trademarks of Motorola Trademark Holdings, LLC. and are used under license. All other trademarks are the property of their respective owners.