Subscreens; Subscreens Of 'Setup' Main Screen - Anritsu MP1570A Operation Manual

4.2 Subscreens

4.2.1 Subscreens of 'Setup' Main Screen

Display
Mapping
Memory
Print
OH preset data
Tandem
Dummy preset
APS program data
System
Floppy disk
Custom function
Measurement
condition
PTR64 frame
Sequence test
OH change data
IP packet
Frame memory
Signaling preset
Selftest
Auto setup
Each main screen can show the following subscreens that are set in
accordance with the target and purpose of measurement.
Description
Selects the type of signal, the interface, and measurement
conditions, according to the measured item,.
Saves and retrieves the measurement condition data and graphic
data on the Analyze screen.
Sets the printing conditions.
Presets the overhead conditions of send signal.
Sets the tandem connection measurement.
Sets the dummy channel.
Sets the APS (Automatic Protection Switch) measurement of
transmission line.
Sets the buzzer, clock, screen color, GPIB and RS-232C.
Saves the measurement conditions data and graphic data of
Analyze main screen in the floppy disk, retrieves them from the
disk.
Sets specific functions that cannot be set on other screens.
Sets the error and alarm detection release conditions, tandem
connection conditions and performance measurement conditions.
Sets the pointer value to generate 64 frames of SONET pointer.
Performs an automatic measurement based on the saved setting
data.
Presets the OH change data pattern of the SONET OH test
function.
Sets the PPP packet and IP packet to be inserted into the payload.
Sets the frame memory to be sent.
Sets the signaling data.
Performs the self test.
Automatically sets the bit rate according to the input signal.

4.2 Subscreens

4 - 7