Motorola R-2550 Programming Reference Manual page 119

MD
Description:
Command Syntax:
Standard RS-232
Response Syntax:
IEEE 488.2
Response Syntax:
Parameters:
The MD command selects and controls the DC voltmeter.
MD
DC IQ&F>
Description: DC Voltmeter Range
optional: Yes
Type:
units:
None
Resolution:
Range: 0: Automatic (R-2600 uses modes 1-3 as necessary)
1: I V
2:
3:
4: Battery
0
Reset:
Description: DC Voltmeter Measurement
Type:
V
units:
Resolution:
nl = 1: 0 through 1.000 V
Range:
nl = 3: 0 through 100.0 V
The M?, ?, or *TRG queries will return the given response following the issuance of the
MD command.
The "Automatic Range" selection of the nl parameter is not available on the
R-2550.
109
DC Voltmeter
Motorola Communications Analyzer
Programming Reference