Security Settings; Factory Reset - ZKTeco RevFace15 User Manual

RevFace15
8.6

Security settings

Tap Security Settings on the System interface to go to the Security settings.
Function Description
Function Name
Security Mode
Standalone Communication
SSH
User ID Masking
Display Verification Name
Display Verification Mode
8.7

Factory Reset

The Factory Reset function restores the device settings such as communication settings and system
settings, to the default factory settings (this function does not clear registered user data).
Tap Reset on the System interface and then tap OK to restore the default factory settings.
P a g e | 56
Select whether to enable the security mode to protect the device
and the user's personal information. You can set the device to work
offline and hide the user's personal information to prevent leakage
during user verification.
To avoid being unable to use when the device is offline, you can
download the C/S software (such as ZKAccess 3.5) on your computer
in advance for offline use.
SSH is used to enter the background of the device for maintenance.
When enabled, and then the user is successfully compared and
verified, the User ID in the displayed verification result will be
replaced with an * to achieve secure protection of sensitive private
data.
Set whether to display the username in the verification result
interface.
Set whether to display the verification mode in the verification result
interface.
Description
Copyright©2023 ZKTECO CO., LTD. All rights reserved.
User Manual