Rear Seat Entertainment (Rse) Setup; Rear Seat Entertainment (Rse) Output Setting; Format Setting; Steering Wheel Position Setting - Alpine iLX-F409 Owner's Manual

Rear Seat Entertainment (RSE) setup

[Rear Seat Entertainment (RSE)] is selected on the General Setup
Menu screen.
Setting items:
Output (page 16)
Format (page 16)

Rear Seat Entertainment (RSE) Output Setting

When a Rear monitor equipped with HDMI input is connected to this
unit, change this setting to "On. " You can output images to the Rear
monitor.
Setting item:
Output
Setting contents:
Off (Initial setting) / On

Format Setting

When the Output setting is [On], you can configure the HDMI Output
format setting (resolution).
Setting item:
Format
Setting contents:
Auto: The suitable format resolution is automatically selected.
480p: Output resolution is fixed at 480p.
720p: Output resolution is fixed at 720p.
1080p: Output resolution is fixed at 1080p.
• Depending on the monitor connected to the HDMI Output, the
resolution may not be able to be selected.

Steering Wheel Position Setting

Set this item when Apple CarPlay is used/Android smartphone which
installed Android Auto App is connected.
This setting influences Apple CarPlay/Android Auto mode.
Setting item:
Steering Wheel Position
Setting contents:
Left (Initial setting) / Right
16
-EN

iDatalink Setting

[iDatalink] is selected on the General Setup Menu screen.

Setting the Default Vehicle Screen

You can set the Default Vehicle Screen displayed in iDataLink mode.
Setting item:
Default Vehicle Screen
Setting contents:
Gauges / Climate / Parking Assist / Vehicle Info. / Last Mode (Initial setting)
• Depending on the car, some setting contents or this setting item may not
be displayed.

Setting the Parking Assist Enable

You can set up the camera for Parking Assist.
Setting item:
Parking Assist Enable
Setting contents:
Off (Initial setting) / Primary Camera / Secondary Camera

Setting the Maestro Module

You can change the setting of the connected iDataLink module.
Setting item:
Maestro Module
• This setting is only available when the iDataLink Maestro? module
(sold separately) is connected.
• Depending on the iDataLink module, the setting contents may differ.