Panasonic PT-F100NTE Manual page 18

Connecting with wireless LAN
In [Network], select the same network number as is displayed in the [WIRELESS
3
LAN] menu of the projector to connect.
Projectors powered on in the chosen network group are listed.
Select the desired projectors, and click [OK].
4
The launcher appears and the connection with the projector is established.
("Description of the launcher" →See page 32)
Launcher is not displayed on the projection screen.
However, in Windows Vista, Launcher is displayed if the software is installed.
• Easy Wireless Set Up cannot be made between the projector and the computer. (See page 71)
• Automatic connection setting (See page 50)
※1
• In the following situations, connections other than [U] are not possible.
- Not logged in with Administrator authority
- When using Windows Vista
• Depending on the computer and wireless LAN card used, Easy Wireless Set Up may not be possible. If this is the case,
the [Network] setting of <Select Access Port> window will be switched to [U] automatically. For details of the connection
procedure, first close Wireless Manager ME 4.5, and then refer to pages 22 - 26.
※2
• The initial network number for both the projector and Wireless Manager ME 4.5 is [1]. These numbers must match for the
connection. To check the network number, refer to the network menu of the projector.
• When importance is placed on security, select the network number [2] - [4], because WEP (wireless communication
encryption) is set on these network numbers.
※
• Important video/audio data is protected because AES
even if [ENCRYPTION] is set to [NONE].
• Other network adapters may not be usable under Easy Wireless Set Up connections.
• Connections to other networks connected through the wireless LAN card are broken under Easy Wireless Set Up
connections.
※ "Glossary" (See page 70)
(cont.)
※ encryption processing takes place in advance for all network numbers,
18