Kodak 9000C Installation Manual
  1. Manuals
  2. Brands
  3. Kodak Manuals
  4. All in One Printer
  5. 9000C
  6. Installation manual

Kodak 9000C Installation Manual

Extraoral imaging system
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
KODAK 9000C and KODAK 9000C 3D Extraoral Imaging
System
Installation Guide

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 9000C and is the answer not in the manual?

Questions and answers

Related Manuals for Kodak 9000C

Summary of Contents for Kodak 9000C

  • Page 1 KODAK 9000C and KODAK 9000C 3D Extraoral Imaging System Installation Guide...
  • Page 2 Notice Congratulations on your purchase of the KODAK 9000C and KODAK 9000C 3D Extraoral Imaging System. Thank you for your confidence in our products and we will do all in our power to ensure your complete satisfaction. The Installation Guide for the KODAK 9000C and KODAK 9000C 3D Extraoral Imaging System includes information on the cephalometric features.

  • Page 3: Table Of Contents

    Adjusting the Inclination of the Cephalostat Head ..........5–10 KODAK 9000C and KODAK 9000C 3D Extraoral Imaging System Installation Guide (SM714)_Ed 01...
  • Page 4 Fitting the KODAK 9000C and KODAK 9000C 3D Covers ....... .

  • Page 5: 1-About This Guide

    Alerts you to a condition that might cause serious damage. IMPORTANT Alerts you to a condition that might cause problems. NOTE Emphasizes important information. Provides extra information and hints. 1–1 KODAK 9000C and KODAK 9000C 3D Extraoral Imaging System Installation Guide (SM714)_Ed 01...

  • Page 6: Note To The User

    To use and operate your panoramic unit and your digital imaging software you must follow the instructions contained in this guide. Warning and Safety Instructions When operating the KODAK 9000C and KODAK 9000C 3D unit, observe the following warning and safety instructions: DANGER OF ELECTRIC SHOCK This is an electrical unit.
  • Page 7 DO NOT use this unit in conjunction with oxygen-rich environments. This unit is not intended for use with flammable anesthetics or flammable agents. • DO NOT hang from the cephalostat. 1–3 KODAK 9000C and KODAK 9000C 3D Extraoral Imaging System Installation Guide (SM714)_Ed 01...

  • Page 8: Marking And Labeling Symbols

    Marking and Labeling Symbols Marking and Labeling Symbols Type B device symbol complying with the IEC 60601-1 standard In the EEC, this symbol indicates: DO NOT discard this product in a trash receptacle; use an appropriate recovery and recycling facility. Contact your local sales representative for additional information on the collection and recovery programs available for this product...

  • Page 9: Responsibility And Warranty

    Our products are guaranteed in their original packaging. Carestream Health, Inc. cannot be held liable for damages resulting from transportation. Consumable spares, software and accessories are excluded from the warranty. 1–5 KODAK 9000C and KODAK 9000C 3D Extraoral Imaging System Installation Guide (SM714)_Ed 01...
  • Page 10 Responsibility and Warranty 1–6 About This Guide...

  • Page 11: 2-Kodak 9000C And Kodak 9000C 3D Unit Overview

    The KODAK 9000C and KODAK 9000C 3D digital imaging unit is compliant with the requirements of the EEC and international medical standards. The KODAK 9000C and KODAK 9000C 3D unit has been designed to carry out the following radiological examinations: •...

  • Page 12: Mobile Components

    The following figures illustrate the general overview of the KODAK 9000C and KODAK 9000C 3D unit. Mobile Components Figure 2-1 illustrates the up and down movement of the KODAK 9000C and KODAK 9000C 3D mobile component and the 180° rotation of the rotative arm. Figure 2–1 KODAK 9000C and KODAK 9000C 3D Unit Mobile Components 2–2...

  • Page 13: General Functional Components

    General Overview General Functional Components Figure 2-2 illustrates the general functional components of the KODAK 9000C and KODAK 9000C 3D. Figure 2–2 KODAK 9000C and KODAK 9000C 3D Unit Functional Components RJ45/1 RJ45/2 Unit fixed arm Unit rotative arm Control panel...
  • Page 14 PC hosting the imaging and acquisition software Cephalostat head top cover Ethernet outlet RJ45/1 Cephalostat head side cover LAN RJ45/2 Carbon fiber screen Sensor Head clamps and ear cones X-ray source assembly Nasion support 2–4 KODAK 9000C AND KODAK 9000C 3D UNIT OVERVIEW...

  • Page 15: Digital Sensor Locations

    3D option. Figure 2–3 KODAK 9000C and KODAK 9000C 3D Unit Panoramic, 3D and Cephalometric Digital Sensor Locations Digi ta l 3 D 2–5 KODAK 9000C and KODAK 9000C 3D Extraoral Imaging System Installation Guide (SM714)_Ed 01...

  • Page 16: Laser Locations

    General Overview Laser Locations Figure 2-4 illustrates the location of the lasers of the KODAK 9000C and KODAK 9000C 3D. Figure 2–4 KODAK 9000C and KODAK 9000C 3D Unit Laser Positions 3D central positioning laser beam Mid-sagittal positioning laser beam...

  • Page 17: Label Locations

    General Overview Label Locations Figure 2-5 illustrates the location of all the labels of the KODAK 9000C and KODAK 9000C 3D. The label locations of the KODAK 9000C are represented with *. IMPORTANT The labels presented are ONLY for the KODAK 9000 3D option.

  • Page 18: Control Panel Overview

    Display Screen: Displays the current acquisition parameters and the error messages. Ready Indicator LED: Green, indicates the unit is ready for acquisition. X-Ray Emission LED: Yellow, indicates the x-rays are being emitted. System Status LED: Red, indicates the error alerts. 2–8 KODAK 9000C AND KODAK 9000C 3D UNIT OVERVIEW...

  • Page 19: X-Ray Remote Control Overview

    You must press and hold the exposure button until the end of acquisition. Premature release of the exposure button interrupts the acquisition. Figure 2–7 X-Ray Remote Control Exposure button: launches image acquisition. 2–9 KODAK 9000C and KODAK 9000C 3D Extraoral Imaging System Installation Guide (SM714)_Ed 01...
  • Page 20 X-Ray Remote Control Overview 2–10 KODAK 9000C AND KODAK 9000C 3D UNIT OVERVIEW...

  • Page 21: 3-Kodak 9000C And Kodak 9000C 3D Packaging

    * The listed components will be in your packaging only if you have to install the Cephalostat option at a later date than the KODAK 9000 or KODAK 9000 3D. Table 3–2 Components Product Description Quantity Cephalostat head 3–1 KODAK 9000C and KODAK 9000C 3D Extraoral Imaging System Installation Guide (SM714)_Ed 01...
  • Page 22 Cephalostat positioning locker* * The listed components will be in your packaging only if you have to install the Cephalostat option at a later date than the KODAK 9000 or KODAK 9000 3D. 3–2 KODAK 9000C AND KODAK 9000C 3D PACKAGING...

  • Page 23: 4-Site Preparation Before Installation

    Check the following ambient operating condition requirements of the x-ray room before installing the unit: • Temperatures: 5 ~35 °C • Relative humidity: 30 ~ 85% • Atmospheric pressure: 700 ~ 1060 hpa 4–1 KODAK 9000C and KODAK 9000C 3D Extraoral Imaging System Installation Guide (SM714)_Ed 01...

  • Page 24: Unit Dimensions

    Unit Dimensions Unit Dimensions MAXI 1595 mm (62 ") 406 mm (15 ") 1390 mm (54 ") 306 mm (12 ") 10 mm ( ") 579 mm 1571 mm (61 ") ") The unit dimensions illustrated in the above figure are as follows: •...

  • Page 25: Electrical Requirements

    We strongly recommend that a separate electrical line be dedicated to supply power to the KODAK 9000 and KODAK 9000 3D unit. This line should be protected by a circuit breaker with a maximum current of: •...
  • Page 26 Electrical Requirements Figure 4–1 Electrical Diagram of the X-ray Room and Connections RJ45 K9000C 7bis General mains 7bis X-ray warning lamp connecting terminal Differential circuit breaker Column connecting terminals Red color actuator emergency stop push-button X-ray remote control Red color actuator emergency stop push-button Door safety switch Red warning lamp, power ON indicator Mains outlet (for electric tools)
  • Page 27 • Maintain them in OFF (open) position until a deliberate action is performed. 4–5 KODAK 9000C and KODAK 9000C 3D Extraoral Imaging System Installation Guide (SM714)_Ed 01...
  • Page 28 Electrical Requirements Table 4–2 Electrical Installation Specifications (Continued) • Specifications of the 60 W 60 W Locate the red warning lamp (5) warning lamps outside the x-ray room to indicate the unit is active (1 lamp at each (5) and (7) access point).

  • Page 29: X-Ray Room Requirement

    IMPORTANT Install the unit where a minimum amount of space is provided to allow easy access for the patient or the maintenance technician (see Figure 4-2). 4–7 KODAK 9000C and KODAK 9000C 3D Extraoral Imaging System Installation Guide (SM714)_Ed 01...
  • Page 30 X-Ray Room Requirement Figure 4–2 Minimum X-Ray Room Space Configuration for K9000C and K9000C 3D RJ45/1 RJ45/2 MINI 2230 mm ") MINI 630 mm ") 7bis Red color actuator emergency stop push-button X-ray remote control Red color actuator emergency stop push-button Door safety switch Red warning lamp, power ON indicator Mains outlet (for electrical tools)

  • Page 31: Pc System Requirements

    PC System Requirements PC System Requirements This section specifies the minimum PC system requirements for KODAK 9000C and KODAK 9000C 3D extraoral imaging system software. IMPORTANT It is MANDATORY to check that the PC system configuration is compatible with the PC system requirements for the KODAK 9000 and KODAK 9000 3D software.
  • Page 32 Removable/portable, external hard Removable/portable, external hard We strongly recommend a daily disk drive disk drive. backup of x-ray images and patient records. For the KODAK 9000 (panoramic) acquisition, you need only the “Viewing” graphic board configuration. 4–10 SITE PREPARATION BEFORE INSTALLATION...

  • Page 33: 5-Installing The Cephalostat

    The tool references mentioned in this manual are ISO tool references. Technical Staff Requirements The installation requires the following number of technicians: Unit Component Technicians Head 5–1 KODAK 9000C and KODAK 9000C 3D Extraoral Imaging System Installation Guide (SM714)_Ed 01...

  • Page 34: Opening The Box

    Opening the Box Opening the Box Before opening the cephalostat assembly box make sure that you have the required tool. To open the cephalostat assembly box, follow these steps: 1. Remove the upper cardboard from the packaging. DO NOT cut through the cardboard. 2.

  • Page 35: Installing The Cephalostat Unit

    1. With the help of 1 person, position the cephalostat arm on the rear of the mobile component of the column. To attach the arm, insert and then tighten the fixing screws (A) and (B). 5–3 KODAK 9000C and KODAK 9000C 3D Extraoral Imaging System Installation Guide (SM714)_Ed 01...
  • Page 36 Installing the Cephalostat Unit 2. Turn and lift the elbow tube (A) to the height adjustment sign (B). Tighten the fixing screws of the elbow tube (A). 4 mm 3. Bind together the cables (B) emerging from the elbow tube (A) with adhesive tape and slide them inside the tube to avoid any damage while installing the cephalostat head.

  • Page 37: Installing The Cephalostat Head

    6. Correctly position the cephalostat head using a spirit level (D) placed on the side of the cephalostat head. Tighten the fixing screws. 6 mm 5–5 KODAK 9000C and KODAK 9000C 3D Extraoral Imaging System Installation Guide (SM714)_Ed 01...

  • Page 38: Wiring The Cephalostat Head

    Installing the Cephalostat Unit Wiring the Cephalostat Head 7. Pull the cables out of the elbow tube (A). Remove the adhesive tape. Connect the following wiring in the following order: Cable ... On the ... To ... 967/CJ653/J10 Power supply board Green and yellow cable Next to power supply box Ground screw Ethernet Pano (with ferrite)

  • Page 39: Wiring The Cephalostat To The Unit Head

    Connect the wiring in the following order: Cable ... On the ... To ... 967/CJ653/J10 CJ653 Ethernet Pano Ethernet Pano Ethernet Workstation Ethernet Workstation 964/CJ732/J29 CJ732 CJ653 CJ699 LF440 CJ653 CJ732 CJ732 5–7 KODAK 9000C and KODAK 9000C 3D Extraoral Imaging System Installation Guide (SM714)_Ed 01...

  • Page 40: Installing The Cephalometric Frankfort Positioning Laser (For Upgrade Only)

    Installing the Cephalometric Frankfort Positioning Laser (For Upgrade Only) Installing the Cephalometric Frankfort Positioning Laser (For Upgrade Only) To install the cephalometric Frankfort positioning laser, follow these steps: 1. Unscrew and remove the generator front cover. 2. Position correctly the cephalometric Frankfurt positioning laser and screw the fixing screws.

  • Page 41: Installing The Cephalostat Positioning Locker (For Upgrade Only)

    Brown to - (C) • Red to + (D) 4. From the CJ804 collimator board, connect cable 980/CJ804/J1 to 980/CJ732/J23 on J23 (E). CJ699 LF440 CJ653 CJ732 5–9 KODAK 9000C and KODAK 9000C 3D Extraoral Imaging System Installation Guide (SM714)_Ed 01...

  • Page 42: Post-Installation Control

    WARNING You MUST correctly calibrate the rotative arm of KODAK 9000 or KODAK 9000 3D. If the arm calibration is not correctly executed the cephalometric mode will not be operational. (see KODAK 9000 and KODAK 9000 3D Service Guide (SM712) Ed02, Using the Technical Menu, Calibration procedures, “Arm...
  • Page 43 (B) to adjust the horizontal inclination. Tighten the fixing screws (A) when you have reached the desired adjustment. IMPORTANT DO NOT adjust using the blade collimator. If necessary, adjust using the cephalometric head. 2.5 mm 4 mm 5–11 KODAK 9000C and KODAK 9000C 3D Extraoral Imaging System Installation Guide (SM714)_Ed 01...

  • Page 44: Adjusting The Height Of The Cephalostat Head

    Post-Installation Control Adjusting the Height of the Cephalostat Head To adjust the height of the cephalostat head, follow these steps: 1. Position the head clamps in a lateral position. 2. Access the Cephalometric Acquisition Window. In the Program pane: • Click •...
  • Page 45 5. If needed, adjust the height, using the cephalostat arm screws (A). Untighten slightly the screws (A) and lift the cephalostat head to the correct height. Tighten the cephalostat arm screws (A). 5–13 KODAK 9000C and KODAK 9000C 3D Extraoral Imaging System Installation Guide (SM714)_Ed 01...

  • Page 46: Adjusting The Ear Cones Alignment

    Post-Installation Control Adjusting the Ear Cones Alignment To adjust the ear cones alignment, follow these steps: 1. Position the head clamps in a lateral position. 2. Access the Cephalometric Acquisition Window. In the Program pane: • Click • Click for a 30 x 30 format. 3.

  • Page 47: Adjusting The Nasion Support

    1. Lower the nasion support to a vertical position. 2. Access the Cephalometric Acquisition Window. In the Program pane: • Click • Click for a 30 x 30 format. 5–15 KODAK 9000C and KODAK 9000C 3D Extraoral Imaging System Installation Guide (SM714)_Ed 01...
  • Page 48 Post-Installation Control 3. Launch an x-ray using the x-ray remote control. The nasion support must be perpendicular to the ear cones. 4. In the Imaging Window, on the drawing toolbar, click . On the acquired image, draw a perpendicular line between the center of the ear cones and the nasion support holes to check that the nasion support is positioned vertically.

  • Page 49: Selecting The Cephalometric Blade Collimator Parameters

    • B is the right balde • C is the top blade • D is the bottom balde Dim Y Org Y Org X Dim X 5–17 KODAK 9000C and KODAK 9000C 3D Extraoral Imaging System Installation Guide (SM714)_Ed 01...
  • Page 50 Post-Installation Control 4. On • Press to decrease the parameters. • Press to increase the parameters. • Press to modify the parameters. 5. When the parameter selection is finished, press to save the selection. 6. Press until you see Collimator Calibration Parameters menu. 7.

  • Page 51: Calibrating The Cephalometic Blade Collimator

    3. If needed, reselect the cephalometric blade collimator parameters and relaunch the x-ray until you obtain the correct margins (see Selecting the Cephalometric Blade Collimator Parameters). NOTE This calibration is for all image formats. 5–19 KODAK 9000C and KODAK 9000C 3D Extraoral Imaging System Installation Guide (SM714)_Ed 01...

  • Page 52: Checking The Image Quality

    Post-Installation Control Checking the Image Quality To check the image quality, follow these steps: 1. Raise the nasion support. 2. Open the head clamps. 3. Position the image quality phantom (A) at the center of the digital sensor. 4. Access the Cephalometric Acquisition Window. In the Program pane: •...
  • Page 53 Check that there is no spliting lines of the grid of the image quality phantom. 8. Save the image. Use this image as reference for a later image quality verification. 5–21 KODAK 9000C and KODAK 9000C 3D Extraoral Imaging System Installation Guide (SM714)_Ed 01...

  • Page 54: Fitting The Covers

    Fitting the KODAK 9000C and KODAK 9000C 3D Covers To fit the KODAK 9000C and KODAK 9000C 3D covers, follow these steps: 1. Fit the upper cover (A) on the column. Fit the cover on the wall-bracket (B). Fit the cover on the column connecting terminal (C) and tighten the fixing screws.
  • Page 55 Press and hold to position the rotative arm so that you can access the inaccessible fixing screw. Switch OFF the unit. Access and tighten the fixing screw. 5–23 KODAK 9000C and KODAK 9000C 3D Extraoral Imaging System Installation Guide (SM714)_Ed 01...
  • Page 56 Fitting the Covers 4. From below the unit head, slide the protection plate (D) between the rotation axe and the unit head. From above the unit head, access and tighten the accessible fixing screws. Switch ON the unit. Press and hold to position the rotative arm so that you can access the inaccessible fixing screw.

  • Page 57: Fitting The Cephalostat Covers

    2. Fit the cephalostat head side covers (B) and screw the fixing screws. 3. Fit the cephalostat head top cover (C) and screw the fixing screws. M5x12 M5x16 M5x12 5–25 KODAK 9000C and KODAK 9000C 3D Extraoral Imaging System Installation Guide (SM714)_Ed 01...
  • Page 58 Fitting the Covers 5–26 INSTALLING THE CEPHALOSTAT...

  • Page 59: Annual Maintenance

    If the results of any of these inspections are unsatisfactory, refer to the Service Manual in order to rectify any problems. If there is any doubt, do not operate the unit. 6–1 KODAK 9000C and KODAK 9000C 3D Extraoral Imaging System Installation Guide (SM714)_Ed 01...
  • Page 60 Annual Maintenance 6–2 Maintenance...

  • Page 61: Compliance With International Standards

    Chapter 7 TECHNICAL SPECIFICATIONS Compliance with International Standards The KODAK 9000C and KODAK 9000C 3D digital imaging unit is compliant with the International and EEC standards. Manufactured by: TROPHY 4, Rue F. Pelloutier, Croissy-Beaubourg 77435 Marne la Vallée Cedex 2, France For: Carestream Health, Inc.

  • Page 62: Classification In Accordance With En/Iec 60601-1

    Compliance with International Standards Classification in Accordance with EN/IEC 60601-1 Type of protection against electric shock Class 1 equipment Degree of protection against electric shock Type B Protection against harmful ingress of water Ordinary equipment Operation mode Continuous operation with intermittent loading Flammable anesthetics Not suitable for use in presence of flammable anesthetics or a mixture of flammable anesthetics with air or oxygen...

  • Page 63: Cephalometric Unit Technical Specifications

    Cephalometric Unit Technical Specifications Cephalometric Unit Technical Specifications Table 8-1 describes the technical specifications for the KODAK 9000C and KODAK 9000C 3D digital imaging unit. Table 7–1 Cephalometric Unit Technical Specification KODAK 9000C KODAK 9000C 3D Sensor Technology Sensor matrix...

  • Page 64: Unit Electronic Specifications

    Unit Electronic Specifications Unit Electronic Specifications 230/240 V (± 10%) 50/60 Hz, 100/110/130V (± 10%) 50/60 Hz, Type of Electrical Power Supply Single-Phase Single-Phase Acceptable fluctuation ± 10% ± 10% Ω Ω Apparent resistance of the power (max.) 0.12 (max.) supply circuit Permanent absorbed current 0.9 A...

  • Page 65: X-Ray Generator Technical Specifications

    A lead collimator, which limits the size of the beam at the image receiver unit • A thermal cutout, which trips at an operating temperature between 63 to 70° C (± 5° C) 7–5 KODAK 9000C and KODAK 9000C 3D Extraoral Imaging System Installation Guide (SM714)_Ed 01...
  • Page 66 X-Ray Generator Technical Specifications Table 7–3 Technical Specifications of the X-ray Generator Standard Compliance IEC Standard 60601-2-28 Compliant Manufacturer Trophy Degree of protection against electric shock Class I Degree of patient protection from the parts applied to the leakage current Type B Operation mode Continuous operation with intermittent loading...
  • Page 67 0.5 mm (0.020'') Anode materials Tungsten Target angle 5° Inherent filtration 0.5 mm (0.20 ") eq. Al Figure 7–2 Heating and Cooling Curves of the X-ray Tube 7–7 KODAK 9000C and KODAK 9000C 3D Extraoral Imaging System Installation Guide (SM714)_Ed 01...
  • Page 68 X-Ray Generator Technical Specifications Figure 7–3 Single Load Chart of the X-ray Tube Figure 7–4 Filament Emissions of the X-ray Tube 7–8 TECHNICAL SPECIFICATIONS...

This manual is also suitable for:

9000c 3d

Table of Contents