Kenwood CAP70 - Can Opener Manual

Safety

• Read these instructions carefully and retain for future reference.
• Remove all packaging and any labels.
• If the cord is damaged it must, for safey reasons, be replaced by KENWOOD or an authorised KENWOOD repairer.
• Do not immerse appliance, cord or plug in water or other liquid.
• Never use a damaged appliance. Get it checked or repaired: see 'Service and Customer Care'.
• Unplug the appliance from the mains supply after use and before cleaning.
• When using the knife sharpener the following precautions should be taken:
  • ensure that the supply cord is positioned away from the sharpener;
  • keep hands etc. and utensils well away from the cutting edge of the blade;
  • direct the blade being sharpened away from the user.
• To reduce the risk of personal injury, keep hair and loose clothing away from moving parts whilst in operation.
• Never try to open cans that are under pressure (e.g. aerosol cans).
• This appliance should only be used on a stable, flat surface or table.
• Do not let the cord hang over the edge of the work surface or touch hot surfaces.
• Children should be supervised to ensure that they do not play with the appliance.
• Misuse of your appliance can result in injury.
• This appliance shall not be used by children.
• Keep the appliance and its cord out of reach of children.
• Appliances can be used by persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and if they understand the hazards involved.
• Only use the appliance for its intended domestic use. Kenwood will not accept any liability if the appliance is subject to improper use, or failure to comply with these instructions.

Key

1. Can piercing lever
2. Cutter
3. Magnetic lid holder
4. Drive wheel
5. Bottle opener storage
6. Removable bottle opener
7. Knife sharpener
8. Cord storage

To Use Your Can Opener

1. Plug the can opener into the power supply.
2. Lift up the piercing lever.
3. Place rim of the can firmly under the magnetic lid holder and against the drive wheel.
4. Press the lever lightly down. The self starting blade will operate and pierce the can and start cutting.. (It is not necessary to hold the piercing lever down during the cutting action).
   • Note: It is recommended to hold the bottom of large, heavy or wide cans during the cutting action.
   • This can opener will easily open all standard-size cans.
5. Once the top of the can is opened the motor will stop automatically.
6. After cutting hold the can and lift the lever up. The lid will be retained by the magnet.

Using the Bottle Opener

1. Remove the bottle opener from the storage compartment.
2. Place the bottle opener on top of the bottle cap with the metal blade under the rim of the cap.
3. Lift up the end of the bottle opener to remove the bottle cap.

Using the Knife Sharpener

1. Place the cutting edge of the knife in the slot located on the back of the can opener.
2. Draw the knife blade through the slot several times.
   • NOTE: This sharpener will not sharpen serrated knives.
   • Take care not to allow the knife to cut into the body of the can opener.

Cord Storage

Use the compartment at the back to store the cord when not in use.

Care and Cleaning

1. Unplug the appliance from the power supply before cleaning.
2. Lift the lever and remove.
3. Wash the lever in hot soapy water and dry thoroughly.
   Dishwashing is not advised.
4. Replace the lever.
5. Wipe over the body with a damp cloth and dry thoroughly.

Service and Customer Care

If you experience any problems with the operation of your appliance, before calling for assistance refer to the troubleshooting guide or visit www.kenwoodworld.com.

If you need help with:

• using your appliance or
• servicing or repairs (in or out of guarantee)
  call Kenwood customer care on 023 9239 2333. Have your model number ready (e.g. TYPE CAP70) and date code (5 digit code e.g. 19C11) ready. They are on the underside of your can opener.
• Spares and attachments
  call 0844 557 3653.
  
  Other countries
• If you experience any problems with the operation of your appliance, before requesting assistance refer to the 'Troubleshooting Guide' section in the manual or visit www.kenwoodworld.com..
• Please note that your product is covered by a warranty, which complies with all legal provisions concerning any existing warranty and consumer rights in the country where the product was purchased.
• If your Kenwood product malfunctions or you find any defects, please send it or bring it to an authorised KENWOOD Service Centre. To find up to date details of your nearest authorised KENWOOD Service centre visit www.kenwoodworld.com or the website specific to your Country.
• Made in China.

IMPORTANT INFORMATION FOR CORRECT DISPOSAL OF THE PRODUCT IN ACCORDANCE WITH THE EUROPEAN DIRECTIVE ON WASTE ELECTRICAL AND ELECTRONIC EQUIPMENT (WEEE)

At the end of its working life, the product must not be disposed of as urban waste.
It must be taken to a special local authority differentiated waste collection centre or to a dealer providing this service

Guarantee (UK only)

If your can opener goes wrong within one year from the date you bought it, we will repair or replace it free of charge provided:

• you have not misused, neglected or damaged it;
• it has not been modified (unless by Kenwood);
• it is not second-hand;
• it has not been used commercially;
• you have not fitted a plug incorrectly; and
• you supply your receipt to show when you bought it.

This guarantee does not affect your statutory rights.

Troubleshooting Guide

Documents / Resources

References

• Kenwood NL | | Keukenmachines, foodprocessors en meer
• Kenwood NL | | Keukenmachines, foodprocessors en meer

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download Kenwood CAP70 - Can Opener Manual