Configuring Onu Profile - Furukawa LW3008C User Manual

To modify an existing ONU profile, use the following command.
Command
onu-profile NAME modify
To delete a created ONU profile, use the following command.
Command
no onu-profile NAME
To save the configured Profile, use the following command in ONU-Profile Configuration
mode.
Command
apply
If you do not save with apply command, the information cannot be shown with show
!
command.
11.3.2

Configuring ONU Profile

11.3.2.1 UNI Port Activation
To activate UNI port of ONU and configure ethernet, use the following command.
uni eth UNI-PORT port-admin enable
uni eth UNI-PORT port-admin disable
11.3.2.2 VLAN Configuration
To configure a VLAN tagging operation for a specific UNI port, use the following command.
Command
uni eth UNI-PORT vlan-
operation us-oper keep
uni eth UNI-PORT vlan-
operation us-oper {add |
overwrite} <1-4094> <0-7>
Mode
GPON
Mode
GPON
Mode
ONU-Profile
Command
ONU-Profile
Mode
ONU-
Profile
Description
Modifies an ONU profile.
NAME: ONU profile name
Description
Deletes an ONU profile.
NAME: ONU profile name
Description
Saves configured ONU profile.
Mode Description
Activates UNI port of ONU (ONT).
UNI-PORTS: UNI port number
Deactivates UNI port of ONU (ONT).
Description
Sets the policy of VLAN tagging for upstream frame.
keep: keeps forwarding the existing tagged/untagged
frame
Sets the policy of VLAN tagging for upstream frame.
add: adds a specified VID (double tagging) with tag in
case of tagged frame
overwrite: replaces an existing tagged/untagged frame
563