Notes For Printing; Starting Print - VDO DTCO 4.1 Instruction Manual

Print
Print
9

■ Notes for printing

IMPORTANT
At the start of each printout, there is an
empty space of approx. 5 cm.
IMPORTANT
If desired, the printout can be custom-
ised with a company logo.
118

■ Starting print

IMPORTANT
Requirements for printing:
• The vehicle is stationary.
• With the ADR variant of the
DTCO 4.1: Ignition is switched on.
• The paper roll is inserted.
• The printer drawer is closed.
 driver 1
24h day
Fig. 123: Sample printout - Daily value
1. Use the buttons / and button
select the required menu point
Printout driver 1 > Daily
value
:
è Navigating within menu functions
[} 84]
2. Select and acknowledge the day and
printout type (UTC or local time).
3. Printout commences after approx.
3 seconds.
Wait until the printout is complete.
4. Sever the printout at the cutting edge.
24h day
25.03.2023
Fig. 124: Sever printout
to IMPORTANT
Make sure that the card drawers are
closed when tearing off a printout to
avoid paper particles getting into the
drawers or the card feed getting dam-
aged.
Instruction manual DTCO 4.1 - Edition 02/2023 - BA00.1381.41 100 102
Notes for printing