Fujitsu PalmSecure SDK V02 Installation Manual page 34

Chapter2 Installing the Sensor Driver by Using Installer Version
When there are multiple USB ports which have been used to connect
Step6
the Sensor, device information of the Sensor driver needs to be
deleted from each USB port. Reconnect the Sensor to the target
hardware and repeat steps 3 to 5.
★Tip
Select [Add or Remove Programs] (for Windows XP), or [Programs and
Step7
Features] or [Uninstall a program] (for Windows Vista / 7) from Control
Panel. Follow the instructions on the screen to delete "FUJITSU
PalmSecure Sensor driver".
Disconnect the Sensor and restart the target hardware.
Step8
★Tip
If device information of the Sensor driver is not deleted
The device information of the Sensor driver remains in Device
Manager.
Even if a Sensor driver of a different version level is installed
later, the previous device information of the Sensor driver
including the version level information is not updated.
The Found New Hardware Wizard is displayed
The Found New Hardware Wizard may be displayed
depending on the timing.
Click the [Cancel] button or ignore the wizard.
24