Page 1
USER MANUAL ENGLISH Thank you very much for choosing the iiyama LCD monitor. We recommend that you take a few minutes to read this comprehensive manual carefully before installing and switching on the monitor. Please keep this manual in a safe place for...
Page 3
IIYAMA CORPORATION: Wijkermeerstraat 8, 2131 HA Hoofddorp, The Netherlands Model No. : PL8614U / PL7514U / PL6514U We recommend recycling of used product. Please contact your dealer or iiyama service center. Recycle information is obtained via the Internet, using the address: https://iiyama.com...
DO NOT PUT ANY OBJECT INTO THE MONITOR Do not put any solid objects or liquids such as water into the monitor. In case of an accident, unplug your monitor immediately and contact your dealer or iiyama service center. Using the monitor with any object inside may cause fire, electric shock or damage.
Page 6
CAUTION INSTALLATION LOCATION Do not install the monitor where sudden temperature changes may occur, or in humid, dusty or smoky areas as it may cause fire, electric shock or damage. You should also avoid areas where the sun shines directly on the monitor. DO NOT PLACE THE MONITOR IN A HAZARDOUS POSITION The monitor may topple and cause injury if not suitably located. Please also ensure that you do not place any heavy objects on the monitor, and that all cables are routed such that children may not pull the cables and possibly cause injury.
SPECIAL NOTES ON LCD MONITORS The following symptoms are normal with LCD monitors and do not indicate a problem. NOTE - When you first turn on the LCD monitor, the picture may not fit in the display area because of the type of computer that is used. In this case, adjust the picture position to the correct position. - You may find slightly uneven brightness on the screen depending on the desktop pattern you use.
Page 8
1 hour and there is evidence of a residual or “ghost” image, you should turn off the monitor for 1 hour in order to clear the residual image. For all LFD products, iiyama recommends displaying moving images and utilising a moving screen saver at regular intervals whenever the screen is idle. You could also turn off the monitor when not in use to assist the prevention.
If you drop any materials or liquids such as water into the monitor when cleaning, WARNING unplug the power cable immediately and contact your dealer or iiyama service center. CAUTION For safety reasons, turn off the power switch and unplug the monitor before you clean it.
CHECKING THE CONTENTS OF THE PACKAGE The following accessories are included in your package. Check to see if they are enclosed with the monitor. If anything is missing or damaged, please contact your local iiyama dealer or regional iiyama office. Power Cable* ...
UNPACKING CAUTION Moving the monitor requires at least two people. If not, it may drop and could result in a serious injury. SPECIAL NOTES ON THE TOUCH PANEL CAUTION Permanent damage can occur if Sharp Edged, Pointed or Metal items are used to activate Touch. This could invalidate any remaining warranty.
INSTALLATION CAUTION Follow the manual instructions for the type of mount you have selected. Refer all servicing to qualified service personnel. Moving the monitor requires at least two people. Before installation, please make sure the wall is strong enough to hold the necessary weight of the display and the mount.
Page 13
[INSTALLATION NOTE] The touch kit of this monitor is an optical device that utilizes infrared light source and sensitive sensors for touch detection. Notice the incident light that contains large quantities of infrared light may affect touch screen operation and performance. Please install it with care as follows to ensure reliable touch performance.
CONTROLS AND CONNECTORS : MONITOR <Front> Power Off Power Button Pressing and holding the Power Button on the front for 3-5 seconds. White Normal Operation Standby Mode When the power indicator light is lighting red, the display is in Power Save Mode. To turn the screen back on, you can press the power button on the front or the remote control.
Page 15
<Back> Option PC module slot AUDIO IN ø 3.5mm mini jack Audio Connector USB-C3.1 OUT (5V, 1A) USB-C 3.1 USB-C Connector AUDIO OUT ø 3.5mm mini jack Headphone Connector USB3.0 (5V, 900mA / Touch Out USB3.0 USB Connector for HDMI OUT) HDMI OUT HDMI HDMI Connector TOUCH1 Touch USB Connector (for HDMI1/HDMI2) HDMI1 IN HDMI2 IN...
FUNCTIONS OF THE REMOTE CONTROL Turn the monitor ON and OFF. Number (1-9) / Under iiWare: 0-9 numeric input Other / Under Windows: 0-9 numeric input, Function (F1- Start/Space/ALT+Tab/ALT+F4/F1-12 F12) for Keyboard function Provide source and resolution Display information. Home Android system main screen button. Input Select the source.
PREPARING THE REMOTE CONTROL To use the remote control, insert the two dry batteries. CAUTION Do not use any other batteries other than those specified in this manual for the Remote Control. Do not insert old and new batteries together in the Remote Control. Make sure that the terminals match the "+" and "-" indications in the battery compartment. ...
Page 18
NOTE Refer to the above instructions when taking out the batteries. Replace with new batteries when the Remote Control does not work close to the monitor. Use AAA dry batteries. Risk of explosion if battery is replaced by an incorrect type. ...
BASIC OPERATION Turning the monitor ON The monitor is turned On and the Power Indicator turns to White when you press the Power Button on the monitor or the Remote Control. The monitor is turned Off and the Power Indicator turns to Red when you press the Power Button on the monitor or the Remote Control. Press again to turn On the monitor.
Page 20
Move the cursor vertically Select adjustment by pressing the Button on the remote control while the menu page is displayed on the screen. [Remote Control] Move the cursor horizontally Select menu or setting, or perform the adjustment by pressing the Button on the remote control while the menu page is displayed on the screen.
Page 21
Adjust the volume of sound Press the VOL- / VOL+ Button on the remote control to adjust the volume of sound when the menu page is not displayed on the screen. [Remote Control] Switch the input signal The Input setting menu appears on the screen when you press the Input Button on the remote control.
An incorrect connection may cause serious damage to both the monitor and the computer. The cable supplied with the monitor is for a standard connector. If a special cable is required please contact your local iiyama dealer or regional iiyama office.
Page 23
[ Example of Connection ] <Back> Power Cable (Accessory) LAN(RJ45) Cable Router (Not included) LAN(RJ45) Cable (Not included) DisplayPort Cable (Not included) Audio Cable (Not included) Touch USB Cable (Accessory) Desktop Computer USB-C Cable (Not included) Laptop Computer AV Equipment etc. HDMI Cable (Accessory) BEFORE YOU OPERATE THE MONITOR 19...
Page 24
[ Connection example with the peripheral device ] CAUTION Turn off the power switch and unplug the monitor and peripherals before connection to avoid an electric shock or a damage. NOTE Refer to the user manual of peripherals at the same time. ...
COMPUTER SETTING Signal Timing Change to the desired signal timing listed on page 54: COMPLIANT TIMING. Procedure for turning ON the Power Switch Turn ON the monitor first, and then the computer. MULTI-TOUCH : This monitor complies with DDC2B of VESA standard. (Plug&play compliant) The MULTI-TOUCH function runs on Windows7/8/8.1/10/11 by connecting the monitor to DDC2B compliant computer with the USB cable supplied.
OPERATING THE MONITOR To create the best picture, your iiyama LCD monitor has been preset at the factory with the COMPLIANT TIMING shown on page 54. You are also able to adjust the picture by following the button operation shown below.
Page 27
NOTE The Back Button on the remote control can be used to return previous menu item. Any changes are automatically saved in the memory when the On Screen Display disappears. Turning off the power should be avoided while using the Menu. Adjustments for Image Position and Phase are saved for each signal timing. Except for these adjustments, all other adjustments have only one setting which applies to all signal timings.
ADJUSTMENT MENU CONTENTS You can also access the Menu by clicking on the desktop or on the navigation toolbar. Common settings Common settings HDMI 1 HDMI 2 HDMI 3 TYPEC 1 TYPEC 2 HDMI 4 Adjustment Item Problem / Option Button to Press HDMI1 Select the HDMI1 input.
Page 29
Audio settings Audio Screen Display Volume Bass Treble Balance Mute Standard Meeting Class Custom Adjustment Item Problem / Option Button to Press Too soft Volume Direct Too loud Too weak Bass Too strong Too weak Treble Too strong Left side speaker louder Balance Right side speaker louder Standard...
Page 30
Screen settings Audio Screen Display Pixel Shift Eye Care Auto Light Adjustment Item Problem / Option The screen image will move around slightly every 2 minutes. Pixel Shift Pixel Shift is turned off. Blue light is reduced. Eye Care Eye Care is turned off. The image brightness can be automatically adjusted according to the ambient light.
Page 31
Display settings Audio Screen Display Brightness Contrast Sharpness Standard Bright Soft Custom Standard Cold Warm Adjustment Item Problem / Option Button to Press Too dark Brightness* Too bright Too dull Contrast Too intense Not available for this model. Sharpness Not available for this model. For general windows environment and Standard monitor default setting.
Page 32
[Debug Menu] * Available for Remote Control only. Input + 2580 Initial Touch Panel The default settings will be restored. Unknown sources: On / Off Enables / disables Unknown sources. iiWare Enable: On / Off Enables / disables Kiosk mode. HDMI OUT Enable: On / Off Enables / disables HDMI OUT function.
Page 33
: Click to display the Hotspot settings. : Displayed when WiFi module is inserted. Click to display the WiFi Settings. 05:32(Clock) : Click on the clock display to display the Date & Time of Settings. xxxxxx : When connecting a LAN or Option WiFi module, the password for a notebook or a smartphone, etc. to connect to iiyama Share, is displayed on the screen. (Automatically generated) OPERATING THE MONITOR 29...
Page 34
Settings ] Adjustment Item Problem / Option Set the WiFi function On / Off and pairing to WiFi device. WiFi* Set the wired network. Ethernet Ethernet : On / Off, Obtain IP Address Automatically : On / Off, IP address, Default gateway, Netmask, DNS, Proxy Set the Hotspot function. Hotspot* Wireless & Hotspot : On/Off, Hotspot Name, Password Network Bluetooth* Set the Bluetooth function On / Off and pairing to Bluetooth device. Set the VPN. Share Share Network to connected device via touch USB cable. Network Hostname Set the Hostname.
Page 35
Type-C 2 / DP / HDMI4 / iiWare Standby after startup (black screen) : Turn off the backlight. Startup NOTE channel Press the Screen Off button on the System remote control or touch the screen to return to the screen. Start up iiyama Logo displayed when the logo monitor is turned on. Energy Saving Enable : On / Off Auto Screen off : Enable the Auto screen off function. (Never / 15 mins / 30 mins / 60 mins / 90mins / 120 Startup mins) & Auto Power off : Enable the Auto power off function. shutdown...
Page 36
Export to signage folder under USB/SD. Export USB storage / SD card Administrator Select Startup Item (None / URL Browser / Browser / Browser / iiyama Default Account / iiyama Class / iiyama DMS / Cloud Startup Kiosk Mode Drive / ESharePro / Finder /iMirror / Keeper / Note Item / Palette / PIP / Settings / Visualizer / WPS Office) Kiosk Mode Set the Kiosk Mode On/Off.
Page 37
: Finder : Browser : All Apps (Clean, Browser, Browser, iiyama Account, Cloud Drive, EShare Pro, Finder, iiyama Class, iiyama DMS, iiyama Share, iMirror, Keeper, Note, Palette, Settings, Viualizer, WPS Office) - Tools - You can customize up to 4 tools from "More" to the navigation bar.
Page 38
Smartphone works as a Mouse/Touchpad for the screen. Airplay/Chromecast: The device without installed iiyama Share app can still connect to iiyama Share via Airplay/Chromecast. (Compatibility is not guaranteed) Miracast: The device without installed iiyama Share app can still connect to iiyama Share via miracast. (Compatibility is not guaranteed) : Crop (Screen Capture) Freedom size...
Page 39
- Move - Move by long-pressing the icon and dragging and dropping. - Remove - Remove it by long-pressing the icon and clicking Remove from the menu. * Available after login in iiyama account. Multi-Windows To use the Multi-Windows feature, first turn on Settings > Personal > Multi-Window Mode. - Resize Windows to display 4 apps on the screen at the same time.
Page 40
<How to use AirClass> The teacher click the AirClass. Use the device to scan the QR code. (device: Android and mobile device on the same network) The students can also join the class by entering the URL in browser. After all students have joined the class, click "ENTER THE CLASS". Answer 1.
Page 41
<How to use Display center> Click the Display certer. This function is to identify the connection to exernal monitor with HDMI OUT or Type C OUT. Pop-up window. Display settings Manager: Choose your desired modes for multi-monitor displays : Duplicate or Extend. Layout: Press and hold (or click) the display, then drag to rearrange the position.
Page 42
[Note] This is a writing software. Can write the characters, Lines and pictures like a whiteboard. Also, can insert an image or file. Click with the touch pen. - Tools - Menu: Display menu of Note. New: Save the Note writing and open a new Note. Open: Open the file. Save: Save the current document to image format to file browser. Save as: Save the current document to a new location with the same name or a different title. Import: Import the picture. (IMG/PDF/SVG) Export : Export as IMG/PDF/SVG/IWB. Cloud Storage: Google Drive / One Drive Save to Cloud Drive Users can save notes and annotations in Note directly to one of the cloud drives by clicking on the Cloud Storage icon in the...
Page 43
Shape: Draw the shape. Table: Table creation Mind map: Visual thinking tool Sticky-Notes: Brainstorming tool Preview: Display image Grid: Grid notes tool Undo: Cancel Redo : Redo Add: Add new page after the last page. : To the previous page. : To the next page.
Page 44
[Finder (File Browser)] Click with the touch pen. Browse the files stored in the internal storage device, the USB storage, Public Cloud, Remote File and your Cloud storage. Supported Format DOC : PPT, Word, Excel, PDF (Open the file by using the WPS Office) Note : Note files, screenshot Movie : .3g2 .3gp .avi .flv .f4v .mkv .mov .mp4 .VOB .mpg/.MPEG .ts Picture : .jpg .jpeg .png .bmp .gif Music : .aac .ape .flac .m4a .mp3 .ogg .wav - Tools - : Search : Minimization : Maximization / restoration : Exit : Grid : List : Sort (Sorts Name, Time, Size, Type.)
Page 45
My Files "My files" folder will be created in your OneDrive or Google Drive once connected to your iiyama account. Public Cloud (Google Drive / One Drive) Save to Cloud Drive Users can save notes and annotations in Note directly to one of the cloud drives by clicking on the Cloud Storage icon in the menu. To change the way files are saved to the Cloud Drive, users can select two options in the cloud storage overview.
Page 46
[Browser (Web Browser)] Connect the network, and browse the web. Click with the touch pen. [iiyama Account] This is a single sign-on authentication scheme for customer identity and access management. Click with the touch pen. [Cloud Drive] Connect the network, and the Cloud Drive.
Page 47
[Visualizer] Visualizer is an app that allows users to connect webcam or visualizer(document camera) for capturing live instructions or physical materials and then projecting them onto a display for viewing and annotating. Click with the touch pen. [WPS Office] This is the software to use the file of the Office. Double click with the touch pen.
STANDBY FEATURE Standby Mode When the video signal from the computer is off, the monitor enters into Standby Mode which reduces the power consumption to less than 0.5W*. The screen becomes dark, and the power indicator turns to red. From Standby Mode, the image reappears in several seconds when either the keyboard or the mouse are touched again.
MONITOR or if the problem persists. 3. If you are experiencing a problem which is not described below or you cannot correct the problem, discontinue using the monitor and contact your dealer or iiyama service center for further assistance. Problem...
The touch position The calibration function set up correctly. does not deviate. RECYCLING INFORMATION For better environment protection please don't dispose your monitor. Please visit our web site: https://iiyama.com for monitor recycling. 46 TROUBLE SHOOTING / RECYCLING INFORMATION...
APPENDIX Design and specifications are subject to change without prior notice. SPECIFICATIONS : ProLite TE8614MIS-B1AG Android: 40points touch Technology Windows: 50points touch Light transmission Hardness Touch Screen Thickness Communication USB serial transfer system Response time ≤2.5ms Size Category 86" Panel technology Size Diagonal: 85.6" (217.43cm) Pixel pitch 0.4935mm H × 0.4935mm V...
Page 52
HDMI 3840 × 2160 60Hz Output Connector USB-C 3840 × 2160 60Hz SPDIF out Connector SPDIF Output Audio connector ø 3.5mm mini jack (Stereo) Internal: 8W ×2 (Facing forward) + 18W ×2 (Facing upward) Speakers (Stereo speakers) iiWare Version V11.0 (Android 13.0 OS) Maximum Screen Size 1895.0mm W × 1066.0mm H / 74.6" W × 42.0" H Power Source 100-240VAC, 50/60Hz, 6.0A 267W (Default / Energy Saving)
SPECIFICATIONS : ProLite TE7514MIS-B1AG Android: 40points touch Technology Windows: 50points touch Light transmission Hardness Touch Screen Thickness Communication USB serial transfer system Response time ≤2.5ms Size Category 75" Panel technology Size Diagonal: 74.52" (189.3cm) Pixel pitch 0.42975mm H × 0.42975mm V 400cd/m (Typical: with Glass), 435cd/m (Typical: without Glass) Brightness...
Page 54
Output Audio connector ø 3.5mm mini jack (Stereo) Internal: 8W ×2 (Facing forward) + 18W ×2 (Facing upward) Speakers (Stereo speakers) iiWare Version V11.0 (Android 13.0 OS) Maximum Screen Size 1650.0mm W × 928.0mm H / 65.0" W × 36.5" H Power Source 100-240VAC, 50/60Hz, 5.0A 209W (Default / Energy Saving) Power Consumption* Standby Mode: 0.5W maximum, Off mode: 0.3W maximum 1709.0 × 1031.0 × 86.0mm / 67.3 × 40.6 × 3.4" (W×H×D) Dimensions / Net Weight 51.5kg / 113.4lbs Operating: Temperature 0 to 40°C / 32 to 104°F...
SPECIFICATIONS : ProLite TE6514MIS-B1AG Android: 40points touch Technology Windows: 50points touch Light transmission Hardness Touch Screen Thickness Communication USB serial transfer system Response time ≤2.5ms Size Category 65" Panel technology Size Diagonal: 64.5" (163.9cm) Pixel pitch 0.372mm H × 0.372mm V 400cd/m (Typical: with Glass), 435cd/m (Typical: without Glass) Brightness...
Page 56
Output Audio connector ø 3.5mm mini jack (Stereo) Internal: 8W ×2 (Facing forward) + 18W ×2 (Facing upward) Speakers (Stereo speakers) iiWare Version V11.0 (Android 13.0 OS) Maximum Screen Size 1428.5mm W × 803.5mm H / 56.2" W × 31.6" H Power Source 100-240VAC, 50/60Hz, 4.0A 150W (Default / Energy Saving) Power Consumption* Standby Mode: 0.5W maximum, Off mode: 0.3W maximum 1488.0 × 908.0 × 86.0mm / 58.6 × 35.7 × 3.4" (W×H×D) Dimensions / Net Weight 39.0kg / 86.0lbs Operating: Temperature 0 to 40°C / 32 to 104°F...
Need help?
Do you have a question about the ProLite TE8614MIS and is the answer not in the manual?
Questions and answers